[ANN][POOLS] CryptoNote Universal Pool Solution - page 3.

Lucasyx6

newbie

Activity: 31

Merit: 0

Yes the balance is unlocked!
I can make manual payments without problems,
But the automatic payment for the workers does not come out....
Please someone with an idea so you can handle it?

Balance after wallet ( admin pool )

Quote

{"available_balance":4836147990662,"locked_amount":0}

Payments log...

Quote

2017-10-19 23:31:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:32:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:33:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:34:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:35:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:36:14 No workers' balances reached the minimum payment threshold
2017-10-19 23:37:14 No workers' balances reached the minimum payment threshold

Please help............

freemanjackal

sr. member

Activity: 378

Merit: 250

Quote from: Lucasyx6 on October 19, 2017, 03:46:08 PM

I have a problem with payments...

Several blocks found...

No payments left for the workers...

Someone to help?

http://bcn.xfree.pm

you should check the unlock payment, check if it is unlocking the wrkers payments and it is updating the info related, if unlocking it is not working right,there will be no payment

Lucasyx6

newbie

Activity: 31

Merit: 0

I have a problem with payments...

Several blocks found...

No payments left for the workers...

Someone to help?

http://bcn.xfree.pm

Lucasyx6

newbie

Activity: 31

Merit: 0

Yes I can see the balance of my wallet, and this is correct and unlocked.

Code:

{"available_balance":445553343919,"locked_amount":0}

Yes, I have the option of active payments.

Code:


"payments": {
        "enabled": true,
        "interval": 60,
        "maxAddresses": 50,
        "mixin": 3,
       "transferFee": 5000000,
       "minPayment": 2500000000,
       "denomination": 100000000

But the pool no automatic payment

bapparabi

hero member

Activity: 826

Merit: 1000

i can see there is some issue may be not sure ..can you see in your wallet how many BCN you have and showing and can you see if that fund is locked or unlocked .

and also your config file can you put there to see if there is issue in the config file ..also you that you payment config is running or not

Lucasyx6

newbie

Activity: 31

Merit: 0

The state of payment of the block found already is OK.
But there was no payment for any worker..... something is wrong with the exit of payments......
Can anyone help?

Pool : http://bcn.xfree.pm

Lucasyx6

newbie

Activity: 31

Merit: 0

But when finding a block the balance should not appear logo on the wallet of the pool and be visible in the admin? The balance is there but says "blocked" just wait?

bapparabi

hero member

Activity: 826

Merit: 1000

its still no matured 5 to go

1375832 5 to go 425615174 a7e0e991edeb21c178210818604953ec19b6d995895318c4c9e64095a7f8599f 10/15/2017, 2:30:41 PM 10%

so wait till it mature then payment will be done auto . if you have done correct setting

Lucasyx6

newbie

Activity: 31

Merit: 0

Hello I have a problem in my pool I am finding blocks but the payment is in:

# # {"Available_balance": 5xxxxxxxxxxxx, "Locked_amount": 39xxxxxxxxxx} # #

How can I fix it?

pool : http://bcn.xfree.pm

Lucasyx6

newbie

Activity: 31

Merit: 0

I apologize for being so stupid! lol Grin

It's already working....

Thank you so much for your help!

Lucasyx6

newbie

Activity: 31

Merit: 0

I'm sorry but the "Simplewallet" is inside the Bytecoin folder and my wallet has the name "Xbytecoin. Wallet" pass XXXX and the port "8082" which command should I use in this case?

Thank you

elGuilleAR

member

Activity: 186

Merit: 10

Quote from: Lucasyx6 on October 11, 2017, 10:53:03 AM

Thank you so much for your help, but I haven't solved it yet!
Using the command inside the folder I have the following error...
See photo

Please, what's missing?
As for your comment warning, the pool is private and I am testing exactly to learn.

As I've said before.
Remember I've told you, you have to replace the parameters with your own.

Try this:
cd bytecoin

simplewallet --config-file configs/bytecoin.conf --wallet-file your_wallet_filename --password your_wallet_password --wallet-rpc-bind-ip ip_to_bind_to --wallet-rpc-bind-port wallet_port_to_bind_to --set_log log_level

where:
configs/bytecoin.conf is forknote config file and only applies if you are using forknote to run bytecoin deemon. If not, you should delete the --config-file option.
your_wallet_filename is the name of your pool wallet previously generated
your_wallet_password is the passwork for .....
ip_to_bind_on is the IP (some on your system you are running simplewallet). you can you 127.0.0.1 which is the default ip to bind to.
wallet_port_to_bind_to is the port you have configured in your pool .json file (see there).
log_level is the debug log level you want to show while you run the daemon

Lucasyx6

newbie

Activity: 31

Merit: 0

Thank you so much for your help, but I haven't solved it yet!
Using the command inside the folder I have the following error...
See photo

http://bcn.xfree.pm/wx.png

Please, what's missing?
As for your comment warning, the pool is private and I am testing exactly to learn.

elGuilleAR

member

Activity: 186

Merit: 10

Quote from: Lucasyx6 on October 11, 2017, 10:15:09 AM

login to root

Quote

cd bytecoin

simplewallet --config-file configs/$daemon.conf --wallet-file $wallet_file --password xxxxxxxxx --wallet-rpc-bind-ip $wallet_rpc_bind_ip --wallet-rpc-bind-port $wallet_rpc_bind_port --set_log $set_log

## -bash: simplewallet: command not foud ##

Please help

Lucas:

shell is almost self-explanatory Cheesy

. You should read the shell interpreter to interpretate what interpreter says to you. Cheesy

Either you compiled or downloaded a linux or windows version of Forknote, you should have this four executables "forknoted, miner, simplewallet, walletd".
find the file simplewallet (remember if you are using it in Linux it must have a x attribute) and replace simplewallet with full path to the file.
That's all!
If you are running this sentence in the same directory/folder you have simplewallet then you must add ./ in front of it to tell bash you want to execute the simplewallet in relative path.

Just to be curious and don't take it bad, please, but you want to build a pool, have you at least some knowledge on basis. What will happen if you have some issues with redis or something that you cannot handle?. if the pool will be public you should consider this. Remember you are dealing with third-party's "money"

Lucasyx6

newbie

Activity: 31

Merit: 0

login to root

Quote

cd bytecoin

simplewallet --config-file configs/$daemon.conf --wallet-file $wallet_file --password xxxxxxxxx --wallet-rpc-bind-ip $wallet_rpc_bind_ip --wallet-rpc-bind-port $wallet_rpc_bind_port --set_log $set_log

## -bash: simplewallet: command not foud ##

Please help

elGuilleAR

member

Activity: 186

Merit: 10

Quote from: Lucasyx6 on October 11, 2017, 01:47:51 AM

Please help, I have this error in admin

Code:


Wallet
Last check: less than a minute ago
Last status: fail
Last response:
{"code":"ECONNREFUSED","errno":"ECONNREFUSED","syscall":"connect"}
Last fail: less than a minute ago
Last fail response:
{"code":"ECONNREFUSED","errno":"ECONNREFUSED","syscall":"connect"

How do I fix it?

Thank you

My pool Bytecoin Total Pool Fee: 0%
http://bcn.xfree.pm

Lucas: it is because of you are not running simplewallet in RPC mode, so the pool can't connect to the wallet to do payments.

simplewallet --config-file configs/$daemon.conf --wallet-file $wallet_file --password your_wallet_password --wallet-rpc-bind-ip $wallet_rpc_bind_ip --wallet-rpc-bind-port $wallet_rpc_bind_port --set_log $set_log

replace by you own settings.-

Lucasyx6

newbie

Activity: 31

Merit: 0

Please help, I have this error in admin

Code:


Wallet
Last check: less than a minute ago
Last status: fail
Last response:
{"code":"ECONNREFUSED","errno":"ECONNREFUSED","syscall":"connect"}
Last fail: less than a minute ago
Last fail response:
{"code":"ECONNREFUSED","errno":"ECONNREFUSED","syscall":"connect"

How do I fix it?

Thank you

My pool Bytecoin Total Pool Fee: 0%
http://bcn.xfree.pm

Lucasyx6

newbie

Activity: 31

Merit: 0

Payments problems!
I'm in testing with the pool mining bytecoin

3 blocks found
The balance is correct in the Admim
But payments do not leave for workers

Please help....
Log: 2017-10-05 14:26:18 No workers' balances reached the minimum payment threshold

Poll:
http://80.208.228.159/bcn/

Lucasyx6

newbie

Activity: 31

Merit: 0

Friend I'm starting and I know little about this!
If I pass you the root password of my VPS, do you set it right and work for me?
As soon as this starts working, I can give you a donation!

elGuilleAR

member

Activity: 186

Merit: 10

Quote from: Lucasyx6 on September 27, 2017, 04:49:46 PM

API This way.
####################
"api": {
"enabled": true,
"hashrateWindow": 600,
"updateInterval": 5,
"port": 8117,
"blocks": 30,
"payments": 30,
"password": "xxxxxxx"
},
#########################
Do I have to change anything in " init.js "?

it is okay.
No, you don't have to change anything in init.js (it is the "pool" itself).
If you run node init.js -config=your_config.json, doest the pool start?
Can you share the log after you start the pool?

Also... did you configure the daemon and wallet sections in your your_config.json. That config tells the pool how and where to connect to the daemon of your coin.
You should specify IP and PORT.

Also, is the port 8117 open in your your linux?

Topic: [ANN][POOLS] CryptoNote Universal Pool Solution - page 3. (Read 39399 times)