Topic: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread - page 210. (Read 354253 times)

Well, the pooler cpuminer also gets 29 hits. Since source from cpuminer has been incorporated in trojans you always get these hits I'm afraid.

That said, you have a point about not trusting executables without source. I'm switching back to the one linked to in the first post. At least for a while... I still get 630+ from that one anyway.

you wont squeeze any more out of that one im affraid

I only get about 500kh/s with my i5-2400 3,3ghz

You can use the QRK 64bit miner. I currently am running a i7 4700m and am getting roughly ~630kh/s @ 3.1GHz

the "Detection ratio:    29 / 49" didnt shock you?

anyway im having no luck with compiling the uncle bob source as is. gotta check tommorow...

The fastest win64 executable I've found is the one linked here:
https://bitcointalksearch.org/topic/m.4324059

With that I'm getting 640kh/s on my i5 @ 3,4GHz. Since the i5 only has 4 threads it means I'd get twice that if I had an i7 with 8 threads...

I would be grate you.
Anyway my cpu is an AMD athlon II x4 645.

With the current miner I do 500kh/s.

Just switched to unclebob's miner..

shall i try making one for you?

PrMQgrUn7oFz5fRJ5favBhdyPFj3wZpjDA
Thank you, cheers!

There's a win64 executable version?

Pmw11pUvu3F1QWwVGAyJLMYzcML2rgPy6e
Cheers!

I completely agree.

As you probably have seen i am now doing a give away on Jan 9th. This will be for the initial 21,000 PRT, all donations after Jan 8th will go towards the next give away (date to be set later). The ~21,000 PRT will be distributed out at 100 PRT increments

Hey everyone!

First i'd like to say....THANK YOU for supporting this coin! I am glad to see it grow!

If you are a miner of this coin, that means you are supporting it. You supporting it means that you believe in this coin. If you are like me, you see that this coin has a bright future for the public especially when that beautiful wallet becomes available.

That being said, I have created a whole new thread for my give away! I plan on doing a give away of the initial 21,000 PRT in 100 increments. This will give 210 people 100 coins(thank you for everyone who suggested this idea) to start. I would like to start this give away with small amounts and slowly increase as donations increase. We will increment in 10-100 PRT moves per person depending on the amount of donations we receive.

As i receive more in donations, I will be calling out some users for a special thanks on my give away thread. This thread will be continuously updated with the current value of available give away funds. I am hoping we can break the 100,000 PRT mark for give away's BEFORE the Jan 9th give away.

I know this sounds like a lot, however after this drawing i will have personally given away more than 15,000 PRT(at current value). As i continue to mine, i will continuously donate more to this give away.


Thread of give away can be found at(donation wallet is on this thread)
https://bitcointalksearch.org/topic/giveaway-0-prt-left-particle-coin-giveaway-finish-prt-403868

use the uncle-bob miner.... im doing more KHs on an twi years old i7 2600k running at only ~3800MHz ! => https://github.com/uncle-bob/quarkcoin-cpuminer

I made some calculations myself and it seems you are right, assuming block time will remain the same and block time equals completed blocks (I have never thought about this and I am not sure block time equals solved block, wouldnät the increased difficulty slow down the process?).

Mathematics. All the necessary input is in the first post of this thread. Due to large blocks and short block time soon all blocks will have been mined.

WTS 100k Particle cheap. PM me!

WTS 162K PRT. PM offers

Sorry, it's only a concept. Those numbers are made up. The highest hash rate I get currently is around 810khs with my i7 4770k 4.2ghz. =)