Topic: [ANN][RIC] Riecoin: constellations POW *CPU* HARD FORK successful, world record - page 141. (Read 685207 times)

Great work Fairglu! Let me take a look at the web wallet to see if it can be forked now. Thanks for all your contributions to riecoin.

Sent some details to northranger about the new explorer APIs to get unspent vouts for a set of addresses, and get a summary of balances and last transactions for a set of addresses.

They are loosely inspired from "unspent" & "multiaddr" APIs from blockchain & dogechain, basically they are

http://chainz.cryptoid.info/ric/api.dws?q=unspent&active=address1|address2|...

http://chainz.cryptoid.info/ric/api.dws?q=multiaddr&active=address1|address2|...

Consider them "beta", subject to changes and for review/testing only.

I'll probably add some API key requirement later on, and probably tweak them for CDN-friendliness, so while you can use it for testing, don't release anything based on them just yet

I've got couple replies about rk3288 boxes, no firmware ready yet, and they are about 110 usd + -, have not order any yet.
I can test on Pipo P1 with rk3288, but just android,no linux ready yet - this is my biggest challenge
any special requirements to run your miner in android ?

Good to know my code wasn't at fault.  You seem to be running at ~half the rate as the a15 core.

I've a version which is ~7-10% quicker(removed a bunch of memory access in sieve2).  I am in the process of moving from 32-bit to 34-bit nonce (4 times the search space) and from pn19 to pn23.  Once I get that done I might compile an a9 version, but I don't hold much hope on GCC knowing much about the differences.

I am looking at those RK3288 set top boxes for ~$79USD, curious how they fare...

Also looks like a few people have put a floor under RIC on poloniex, seems to have held and pushed the price up some what.

Regards,

--
bsunau7

...hmm... minix still running

[2014-08-05 07:37:35] thread: 1 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (5709449,155203,4226,99,4,0,0)
[2014-08-05 07:37:35] thread: 1 setup:0.104195s sieve1:0.050753s sieve2:1.197682s sieve3:0.000001s total:5.007685s
[2014-08-05 07:37:35] thread 1: 4289339939 numbers, 856535 knumbers/s
[2014-08-05 07:37:37] thread: 2 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (5709638,155208,4226,99,4,0,0)
[2014-08-05 07:37:37] thread: 2 setup:0.103620s sieve1:0.050189s sieve2:1.222420s sieve3:0.000002s total:4.949345s
[2014-08-05 07:37:37] thread 2: 4290512230 numbers, 866869 knumbers/s
[2014-08-05 07:37:37] thread: 0 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (5709826,155211,4226,99,4,0,0)
[2014-08-05 07:37:37] thread: 0 setup:0.104512s sieve1:0.050803s sieve2:1.242583s sieve3:0.000002s total:5.080894s
[2014-08-05 07:37:37] thread 0: 4289476470 numbers, 844222 knumbers/s
[2014-08-05 07:37:39] thread: 3 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (5710026,155215,4226,99,4,0,0)
[2014-08-05 07:37:39] thread: 3 setup:0.103281s sieve1:0.050215s sieve2:1.185316s sieve3:0.000001s total:5.142445s
[2014-08-05 07:37:39] thread 3: 4285951855 numbers, 833420 knumbers/s
[2014-08-05 07:37:39] Total: 3401046 knumbers/s
[2014-08-05 07:37:39] Expected average time to block: 16460402.054816
[2014-08-05 07:37:39] accepted: 0 in 38130 seconds

stick rebooted after couple minutes,
no other load,only miner.
tried again - rebooted after an hour - nothing else - probably not enough cooling,
trying minix neo x7 now ...
after 10 minutes :

[2014-08-04 20:44:20] Expected average time to block: 24389465.705851
[2014-08-04 20:44:20] accepted: 0 in 571 seconds
[2014-08-04 20:44:21] thread: 2 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (59130,1669,46,1,0,0,0)
[2014-08-04 20:44:21] thread: 2 setup:0.299629s sieve1:0.056453s sieve2:1.452500s sieve3:0.000001s total:5.818497s
[2014-08-04 20:44:21] thread 2: 4294763698 numbers, 738112 knumbers/s
[2014-08-04 20:44:23] thread: 0 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (59310,1672,47,1,0,0,0)
[2014-08-04 20:44:23] thread: 0 setup:0.106151s sieve1:0.275340s sieve2:1.306274s sieve3:0.000001s total:5.644531s
[2014-08-04 20:44:23] thread 0: 4287674988 numbers, 759605 knumbers/s
[2014-08-04 20:44:26] thread: 3 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (59491,1673,47,1,0,0,0)
[2014-08-04 20:44:26] thread: 3 setup:0.102727s sieve1:0.115451s sieve2:1.697264s sieve3:0.000001s total:6.077115s
[2014-08-04 20:44:26] thread 3: 4286688047 numbers, 705345 knumbers/s
[2014-08-04 20:44:26] Total: 2543341 knumbers/s
[2014-08-04 20:44:26] Expected average time to block: 23623083.571298
[2014-08-04 20:44:26] accepted: 0 in 577 seconds

[2014-08-04 20:45:16] thread: 1 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (64724,1815,51,1,0,0,0)
[2014-08-04 20:45:16] thread: 1 setup:0.102918s sieve1:0.049154s sieve2:3.499405s sieve3:0.000001s total:12.896639s
[2014-08-04 20:45:16] thread 1: 4292262191 numbers, 332818 knumbers/s
---oops = I see the problem....some stuck driver probably....
 2782 root      20   0  111060  35316   1888 S 269.2  1.9  32:57.28 rminerd_armv7_2                     
  571 root      20   0    9380   2320   1904 R  86.7  0.1  20:18.62 wpa_supplicant                     
   19 root      rt   0       0      0      0 S  41.4  0.0   9:28.66 kconsole             

Thanks!  A lot of variance in thread 3,  were you thermally limited or doing something else on the stick?  Everything I've read says that an a15 is significantly better than an a9 based processor for this workload.  Your thread 0 is 50% of my performance with a 15-30% faster clock sort of proves this.  I am getting a banana pi (dual a9 core) in a few days, I'll test out compile options on it before it gets used for motor control.

And for anyone who cares, improving GMP performance isn't easy :-/

Regards,

--
bsunau7

just fired up rminerd_armv7_210714 by bsunau on my latest fedora arm experiment with 4core rk3188 tv stick - leaving at

[2014-08-04 07:07:37] thread 0: 4292317050 numbers, 729502 knumbers/s                                   
[2014-08-04 07:07:44] thread: 0 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (8307,222,3,0,0,0,0)                     
[2014-08-04 07:07:44] thread: 0 setup:0.248963s sieve1:0.055215s sieve2:2.025427s sieve3:0.000002s total:6.726587s
[2014-08-04 07:07:44] thread 0: 4288084322 numbers, 637465 knumbers/s
[2014-08-04 07:07:45] thread: 3 TOTAL (p0,p1,p2,p3,p4,p5,p6) = (8446,226,3,0,0,0,0)
[2014-08-04 07:07:45] thread: 3 setup:0.227510s sieve1:0.056812s sieve2:7.640975s sieve3:0.000002s total:46.055727s
[2014-08-04 07:07:45] thread 3: 4286266223 numbers, 93067 knumbers/s
[2014-08-04 07:07:45] Total: 1565818 knumbers/s
[2014-08-04 07:07:45] Expected average time to block: 36355078.655511
[2014-08-04 07:07:45] accepted: 0 in 168 seconds

Chainz api is nice, I'm using it, thank you fairglu:)

Cool, looking forward to that!

nice to hear progress ---- i will be watching & waiting

Great news on stratum!

I'll get on the api next week, should at least be able to have some low perf version for testing, and if okay, make it scalable to the moon

Awesome. Thanks for being dependable and sorry I am not able to help a lot. I hope others can be involved with development of Riecoin too. I've reached out to fairglu to implement an API call on his explorer so I can use it to get raw script calls for the android wallet and the web wallet (turns out that was what I was missing according to my sources).

almost there!
my b15 miner updated for stratum is finding shares and verifying them locally, but it doesn't sumbit them to the pool yet. That's the last packet of the stratum protocol that's left to implement. I'll work on it today and, working or not, will upload to github later so others can look at it (bsunau7 offered to help).

thanks for the patience, again....

Any update this week Gatra?

Do we have an expected time for when this would be implemented Gatra?

Many months ago I setup a high uptime distributed pool infrastructure because we were expecting that piece. I don't see how the lack of pools problem will be resolved without it. Oh well. If it ever gets built we'll turn that pool on.

I believe Gatra is still working on it. Unsuprisingly, it is difficult to do that. Fortunately, he says that he now has a team of developer I believe?

We still have no open source xpt pool or proxy?

I agree that the coin has had more hype before and has lot traction since but a dead coin is like Kanye or Particle where dev. actually abandoned it...continuous development = not dead.