Hi,
If anyone wants to try something new join my new pool with proportional payout system and email notifications:
feeleep
Topic: [ANN][SBC] StableCoin ¦¦ A new breed of cryptocurrency ¦¦ v1.2 RELEASED - page 24. (Read 102773 times)
June 11, 2013, 03:09:55 AM
June 11, 2013, 12:23:41 AM
3rd EDIT
Feeleep is online but hasn't responded to my PM. I'm pulling my miners and going elsewhere until my account is properly credited for the the shares I've mined, which looks like every single one going back thru my transaction history. I'd recommend avoiding this pool until the issue is resolved, which is kind of a pity because the only other pushpool listed in post #2 of this thread is closed to registrations.
Seeing the same problem at http://stc.coinmine.pl
Hi All,
Sorry guys for not responding but my PC was on and I was just away.
As explained already in PM - there are couple of reasons for this:
1. New pools always have inaccurate estimations of payouts due to a nature of PPLNS calculation - my pool is set up to 50000 so until the pool reached this point it is very difficult to predict payouts
2. all PPLNS pools are designed to support steady miners so if you jump between pools then your payouts will fluctuate (but anyway in long term you will receive what you earned)
If you want guys I can setup pool with proportional payouts so you will receive instant payments for every block
feeleep
June 10, 2013, 10:23:38 PM
Update from Silverwolf's SBC Pool
http://silverwolf.ath.cx/sbc
Added Getwork with LongPoll support on port 8350 by request.
url = http://silverwolf.ath.cx
port = 3337 (Stratum) or 8350 (Getwork w/LP)
username = username.workername
password = workerpassword
http://silverwolf.ath.cx/sbc
Added Getwork with LongPoll support on port 8350 by request.
url = http://silverwolf.ath.cx
port = 3337 (Stratum) or 8350 (Getwork w/LP)
username = username.workername
password = workerpassword
June 10, 2013, 10:04:42 PM
I wash hashing away first 2 days.. now i realy just hope for the coin to suceed (nope, not my primary goal).
Silverwolf, if you share your code (from start to end) for a noob, i will turn a full time pool, so people can reigster to it. i promise to keep it 1% and thats about it.
(I am the one that hashed at your pool alot
)
drop a mail if you willing, if you not then I wont hold you under the gun you have my mail in your pool reg.
Silverwolf, if you share your code (from start to end) for a noob, i will turn a full time pool, so people can reigster to it. i promise to keep it 1% and thats about it.
(I am the one that hashed at your pool alot
)drop a mail if you willing, if you not then I wont hold you under the gun
you have my mail in your pool reg.I will share my current code base and some basic instructions on what settings need to be set and what they do.
Beyond that however, The entirety of the work and responsibility will be up to you
It will be tonight before I can get it packaged and ready. Send me a PM so I don't forget.
You should be aware however, that running a stand alone pool is NOTHING like running a p2pool node.
It's a lot more work and responsibility for one thing.
Probably going to be tomorrow before I get time to put this together for you. Really really busy today.
June 10, 2013, 09:42:58 PM
Update from Silverwolf's SBC Pool
http://silverwolf.ath.cx/sbc
Manual withdrawal functionality has been reworked to prevent exploitation and has been enabled again.
How it works now :
When you click the "Cash Out" button, instead of sending the money immediately it "Schedules" the withdrawal request.
Withdrawal requests are processed every minute when the cronjob runs.
Enjoy !
http://silverwolf.ath.cx/sbc
Manual withdrawal functionality has been reworked to prevent exploitation and has been enabled again.
How it works now :
When you click the "Cash Out" button, instead of sending the money immediately it "Schedules" the withdrawal request.
Withdrawal requests are processed every minute when the cronjob runs.
Enjoy !
June 10, 2013, 05:56:17 PM
Hello all, some quick updates.
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
Can you post your photoshop workup of the site? I know most sites are built using image creators...if this is the case with the shop...can you post it so we know it isn't vaporware?
June 10, 2013, 05:54:44 PM
Hello all, some quick updates.
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
Good to hear!
June 10, 2013, 05:30:41 PM
Hello all, some quick updates.
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
1) We're currently working on an updated client, and will be pushing that out sometime this week hopefully
2) Work on the shop continues. Should be ready to launch not too long after SBC has a stable price on the exchanges. I've heard Vern is strongly considering putting SBC on cryptsy. Show your support!
June 10, 2013, 05:29:45 PM
Buying stablecoins, PM me with amount and offers.
June 10, 2013, 05:22:49 PM
Will it hit exchange soon?
I really hope all you SOBs don't try to just dump all your coins and drive the price to nothing if it does
Unless the shop OP promised us is amazing.
None of these altcoins have any real world use which is why they get dumped.
June 10, 2013, 05:20:04 PM
Will it hit exchange soon?
I really hope all you SOBs don't try to just dump all your coins and drive the price to nothing if it does
June 10, 2013, 05:14:32 PM
I have a very good stable 24/7 pool up and running. I'm finding at least a few blocks per hour!
go to
86.22.130.144:9119
to see stats
1% Fee
100Meg Line
Server specs
i7-3820
8GB ECC DDR RAM
SSD HDD
Doing nothing my serving my P2Pool!!
It's a P2pool so put your wallet address as your username and x as the password.
I'm sitting on a nice chunk of coins now so I'll tell you what.
I will give 25 Stablecoins each within 1 hour to the first 4 people to join my pool!!
Come on guys!
go to
86.22.130.144:9119
to see stats
1% Fee
100Meg Line
Server specs
i7-3820
8GB ECC DDR RAM
SSD HDD
Doing nothing my serving my P2Pool!!
It's a P2pool so put your wallet address as your username and x as the password.
I'm sitting on a nice chunk of coins now so I'll tell you what.
I will give 25 Stablecoins each within 1 hour to the first 4 people to join my pool!!
Come on guys!
Nobody wants free coins?
I joined your pool how long before i show in stats?
sMW33ELwembJJ7foNGW39fh6An2jbkfpoW
25 coins on the way to you as promised
Transaction id:
6294f03e478dbae90f07cfaa2b70374a83a5127b69432e06b5fd4c4e643aa291
June 10, 2013, 05:05:49 PM
Will it hit exchange soon?
June 10, 2013, 04:10:43 PM
Announcing a new StableCoin Pool
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
Anyone want to jump in with some hashing power and help get the pool started?
June 10, 2013, 03:53:40 PM
Announcing a new StableCoin Pool
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
You might consider lowering your lastNshares value a bit. The difficulty is quite low at the moment.
Based upon the formula 2 x (Block Diff / Share Diff) the current lastNshares value when using difficulty 60 shares is 1,829
Round(2 x ((0.83741167 * 65536) / 60)) = 1,829
100,000 is a bit high in this case IMHO.
https://bitcointalksearch.org/topic/proper-pplns-lastnshares-calculation-for-script-based-coin-pools-solved-220341
Changed down to 10000 shares.. Thanks for the suggestion.
June 10, 2013, 03:48:42 PM
Announcing a new StableCoin Pool
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
You might consider lowering your lastNshares value a bit. The difficulty is quite low at the moment.
Based upon the formula 2 x (Block Diff / Share Diff) the current lastNshares value when using difficulty 60 shares is 1,829
Round(2 x ((0.83741167 * 65536) / 60)) = 1,829
100,000 is a bit high in this case IMHO.
https://bitcointalksearch.org/topic/proper-pplns-lastnshares-calculation-for-script-based-coin-pools-solved-220341
(or if you want more detail: https://bitcointalksearch.org/topic/pplns-39832)
June 10, 2013, 03:31:43 PM
Announcing a new StableCoin Pool
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
http://stablecoin.miningpool.co
Stratum Only: stratum+tcp://stablecoin.miningpool.co:3336
Server: Rackspace USA
PPLNS: 100000 Shares
June 10, 2013, 03:29:15 PM
I have a very good stable 24/7 pool up and running. I'm finding at least a few blocks per hour!
go to
86.22.130.144:9119
to see stats
1% Fee
100Meg Line
Server specs
i7-3820
8GB ECC DDR RAM
SSD HDD
Doing nothing my serving my P2Pool!!
It's a P2pool so put your wallet address as your username and x as the password.
I'm sitting on a nice chunk of coins now so I'll tell you what.
I will give 25 Stablecoins each within 1 hour to the first 4 people to join my pool!!
Come on guys!
go to
86.22.130.144:9119
to see stats
1% Fee
100Meg Line
Server specs
i7-3820
8GB ECC DDR RAM
SSD HDD
Doing nothing my serving my P2Pool!!
It's a P2pool so put your wallet address as your username and x as the password.
I'm sitting on a nice chunk of coins now so I'll tell you what.
I will give 25 Stablecoins each within 1 hour to the first 4 people to join my pool!!
Come on guys!
Nobody wants free coins?
I joined your pool how long before i show in stats?
sMW33ELwembJJ7foNGW39fh6An2jbkfpoW
June 10, 2013, 03:07:14 PM
I wash hashing away first 2 days.. now i realy just hope for the coin to suceed (nope, not my primary goal).
Silverwolf, if you share your code (from start to end) for a noob, i will turn a full time pool, so people can reigster to it. i promise to keep it 1% and thats about it.
(I am the one that hashed at your pool alot)
drop a mail if you willing, if you not then I wont hold you under the gun you have my mail in your pool reg.
Silverwolf, if you share your code (from start to end) for a noob, i will turn a full time pool, so people can reigster to it. i promise to keep it 1% and thats about it.
(I am the one that hashed at your pool alot
)drop a mail if you willing, if you not then I wont hold you under the gun
you have my mail in your pool reg.I will share my current code base and some basic instructions on what settings need to be set and what they do.
Beyond that however, The entirety of the work and responsibility will be up to you
It will be tonight before I can get it packaged and ready. Send me a PM so I don't forget.
You should be aware however, that running a stand alone pool is NOTHING like running a p2pool node.
It's a lot more work and responsibility for one thing.
June 10, 2013, 03:01:48 PM
3rd EDIT
Feeleep is online but hasn't responded to my PM. I'm pulling my miners and going elsewhere until my account is properly credited for the the shares I've mined, which looks like every single one going back thru my transaction history. I'd recommend avoiding this pool until the issue is resolved, which is kind of a pity because the only other pushpool listed in post #2 of this thread is closed to registrations.
Feeleep is online but hasn't responded to my PM. I'm pulling my miners and going elsewhere until my account is properly credited for the the shares I've mined, which looks like every single one going back thru my transaction history. I'd recommend avoiding this pool until the issue is resolved, which is kind of a pity because the only other pushpool listed in post #2 of this thread is closed to registrations.
I am sorry that you are having issues with the other pool. I would like to open registrations on mine, but unfortunately the network hash rate has dropped to the point that even though my pool has dropped to 40MH/s at the moment we are still more than 45% of the network.
Registrations will automatically unlock when the network hash has increased such that we are less than the limit of 45% of total network hash.
Given all the troubles that FTC encountered yesterday it's more obvious than ever how important it is to keep any one pool from taking too much of the network hash and that sort of thing is why the automatic limit was instituted in the first place.
I really expected there would be more good pools to use by this point.
The only other option that I have would be to open a new and entirely separate pool for SBC in addition to my regular one, which I really wasn't planning on doing, but it wouldn't be difficult.
Thoughts ?
http://silverwolf.ath.cx/sbc
I appreciate your input here. I know you are a coin developer and you know the ins and outs of coin development far better than myself.
Strictly speaking perhaps I don't have to cap registrations at 45%, but I still don't think it's particularly good idea for the coin to have so much of the entire network running through only one pool.
Since we have differing opinions in this matter I will ask the advise off the SBC developers and see what they want me to do.
Can a developer chime in here ? Should I leave the cap at 45% or should I raise it ?
Jump to: