Anyone looking for a risky investment :
110,000SHC for 10BTC.
Dev is mining like crazy : http://106.3.225.46/worker/SRKTcvDg4yTsguFkv91dDtzRmGpp7RSAqb
Dev, i suggest you buy my bag and focus on development. You are losing too much time mining.
Topic: [ANN][SHC] ShinyCoin █First ever RAMHOG algo Pow/Pos █NO ASIC/GPU | Whitepaper - page 12. (Read 58444 times)
July 10, 2014, 07:37:35 AM
July 10, 2014, 06:11:53 AM
If we can test a pool with a coin daemon running on testnet, so as not to wait many hours for a real valid block, then I think we could collaborate on this and gather the required pieces in order to set up a ramhog pool. From what I see, it should not be difficult. It just requires some time. Currently I have no free time, but next week I might find some and, if I am still interested in this coin, there will be an invitation to anyone who is able to think long-term (important requirement-- sandor and bitspender are excluded - Sorry dudes) and has shown an interest in running a pool to collaborate on this and release some notes so that even n00bs are able to run a pool. If you cannot understand why, it's not my fault.
See ya all.
See ya all.
Right on man... let the n00bs run a pool! Interesting to see how that works out.
Like really, ... I have no words for you. Idiot is an understatement.
July 10, 2014, 05:40:11 AM
Wallet transmission, can not be confirmed
send to :SW87Vv6qGWwMSKX43nTwAt2RVyyVk3epH2
ID:5d6cb460ba1a96d4549da223b59213a0d12f2b1ab88611a3fad3a5ed2dce290e
ID:125ab2a2288060951966689deb459caf0f72e8039c1dcb68674e8b144a5cb588
help
send to :SW87Vv6qGWwMSKX43nTwAt2RVyyVk3epH2
ID:5d6cb460ba1a96d4549da223b59213a0d12f2b1ab88611a3fad3a5ed2dce290e
ID:125ab2a2288060951966689deb459caf0f72e8039c1dcb68674e8b144a5cb588
help
July 10, 2014, 04:35:34 AM
ok, i think we done here.
... and waiting for better clone, the clone sometime better the original one, base on their promotion skill
... and waiting for better clone, the clone sometime better the original one, base on their promotion skill
I agree.
This project currently depends on a dev who is lost in space and on the exclusive pool operator that cannot see further than his 5% fee and is dreaming of 1kh/s hashrate pointed to his pool. It shouldn't require a Harvard diploma to figure out what happens next to this coin.
Get a good point: waiting for a good clone.
July 10, 2014, 03:11:58 AM
Those on *nix and who didn't get a boost from previous update, I have pushed another update that will surely boost your HPM by 20-30%.
You don't need to specify any compiler flags, just do ./configure && make.
And don't forget to set Hugepages or it won't work! sudo sysctl -w vm.nr_hugepage=X where X=7680*threads
You don't need to specify any compiler flags, just do ./configure && make.
And don't forget to set Hugepages or it won't work! sudo sysctl -w vm.nr_hugepage=X where X=7680*threads
Quote
error: "vm.nr_hugepage" is an unknown key
What's wrong?
July 10, 2014, 01:19:15 AM
ok, i think we done here.
... and waiting for better clone, the clone sometime better the original one, base on their promotion skill
... and waiting for better clone, the clone sometime better the original one, base on their promotion skill
July 09, 2014, 10:47:38 PM
eh~~
Maybe dead?
I will be back when it hits an exchange~~
Good luck.
Maybe dead?
I will be back when it hits an exchange~~
Good luck.
July 09, 2014, 03:10:02 PM
I've made some optimizations to the pool and it should be rock solid now, it should be able to handle up to 1 Kh/s. And I've increased the share rate to 1 share per 100s.
Why are you always changing stuff July 09, 2014, 02:04:09 PM
I've made some optimizations to the pool and it should be rock solid now, it should be able to handle up to 1 Kh/s. And I've increased the share rate to 1 share per 100s.
July 09, 2014, 07:57:51 AM
Those on *nix and who didn't get a boost from previous update, I have pushed another update that will surely boost your HPM by 20-30%.
You don't need to specify any compiler flags, just do ./configure && make.
And don't forget to set Hugepages or it won't work! sudo sysctl -w vm.nr_hugepages=X where X=7680*threads
You don't need to specify any compiler flags, just do ./configure && make.
And don't forget to set Hugepages or it won't work! sudo sysctl -w vm.nr_hugepages=X where X=7680*threads
July 09, 2014, 05:38:43 AM
Who can answer me? Why I used the new Shinyminer, it does not work!
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
Too slow. Better give up mining SHC with that hashrate, you will submit a share every ~8 hours.
July 09, 2014, 05:33:48 AM
Who can answer me? Why I used the new Shinyminer, it does not work!
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
same to me.
Why do we need this update?
Why don't we have more pools or miner devs?
You can now be made?
With what tools? I don't know how to mining.
Do I have to quit?
July 09, 2014, 04:13:01 AM
July 09, 2014, 04:10:40 AM
Who can answer me? Why I used the new Shinyminer, it does not work!
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
same to me.
Why do we need this update?
Why don't we have more pools or miner devs?
July 09, 2014, 03:45:11 AM
Who can answer me? Why I used the new Shinyminer, it does not work!
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:30:50] Stratum requested work restart
[2014-07-09 16:31:47] Stratum requested work restart
[2014-07-09 16:32:42] Stratum requested work restart
[2014-07-09 16:33:37] Stratum requested work restart
[2014-07-09 16:34:32] Stratum requested work restart
[2014-07-09 16:35:27] Stratum requested work restart
[2014-07-09 16:35:55] Stratum detected new block
[2014-07-09 16:35:55] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:36:50] Stratum requested work restart
[2014-07-09 16:37:45] Stratum requested work restart
[2014-07-09 16:38:05] thread 0: 1 hashes, 0.46 hash/m
[2014-07-09 16:38:40] Stratum requested work restart
[2014-07-09 16:39:35] stratum_recv_line failed
[2014-07-09 16:39:38] Stratum connection interrupted
[2014-07-09 16:39:38] thread 0: 0 hashes, 0.00 hash/m
[2014-07-09 16:39:40] Stratum requested work restart
[2014-07-09 16:39:40] Stratum requested work restart
July 09, 2014, 03:16:07 AM
July 09, 2014, 02:43:12 AM
Mandatory Shinyminer Update
Source : https://github.com/siklon/shinyminer
Linux x64 (static) : https://www.dropbox.com/s/dbfxvmoryekyq5i/shinyminer
Windows x64 : https://www.dropbox.com/s/0l4hjypmrg48x6t/shinyminer.zip
I will give 2 hours to update, after that I will update the pool and the old shinyminer won't work.
Source : https://github.com/siklon/shinyminer
Linux x64 (static) : https://www.dropbox.com/s/dbfxvmoryekyq5i/shinyminer
Windows x64 : https://www.dropbox.com/s/0l4hjypmrg48x6t/shinyminer.zip
I will give 2 hours to update, after that I will update the pool and the old shinyminer won't work.
When I use the new miner, it said:
" I go faster as root."
what's that?
BTW, the new miner cannot work for my machine without being as a root.
July 09, 2014, 02:39:10 AM
What time is the coin will have on the B network？
What is the B network?I think it is bittrex.com
July 09, 2014, 02:23:39 AM
Mandatory Shinyminer Update
Source : https://github.com/siklon/shinyminer
Linux x64 (static) : https://www.dropbox.com/s/dbfxvmoryekyq5i/shinyminer
Windows x64 : https://www.dropbox.com/s/0l4hjypmrg48x6t/shinyminer.zip
I will give 2 hours to update, after that I will update the pool and the old shinyminer won't work.
Source : https://github.com/siklon/shinyminer
Linux x64 (static) : https://www.dropbox.com/s/dbfxvmoryekyq5i/shinyminer
Windows x64 : https://www.dropbox.com/s/0l4hjypmrg48x6t/shinyminer.zip
I will give 2 hours to update, after that I will update the pool and the old shinyminer won't work.
When I use the new miner, it said:
" I go faster as root."
what's that?
July 09, 2014, 02:22:53 AM
What time is the coin will have on the B network？
What is the B network? Jump to: