[ANN][SHITCOINDELUXE][SHT] Shitcoin DeLuxe - Learn, mine, and have fun with it! - page 6.

brakmic

member

Activity: 461

Merit: 13

Quote from: zhcraiv on May 02, 2018, 07:13:50 AM

Quote from: Hashnamer on May 01, 2018, 10:30:13 PM

Omg, oooh, that is first real shitcoin! Amazing! When listing to binance? >~<)

All is posible in crypto world Cheesy

Although I've not planned to list this coin on an exchange, if the community wants to trade with it I'd try to register it. I would also use my ID to make everything proper. As you have already seen in the original posting, I am not hidden, so I would have no problems to try to register this coin as well. I hope you will also help me if there are any things that I can't solve by myself.

However, this would only happen if this coin gets real community who is taking care of it. I will not impose any "ideas" on you because I think that this is just another form of centralization.

I am happy to be only the developer this coin. I do not mine myself and I also don't own such hardware.

Therefore, I will leave it to others to decide if this coin is worth anything and what should be done with it.

Cheers,

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 06:49:04 AM

I figured it out! Hooray! helped install the updated miner \ cgminer-3.7.3-kalroth-20140204

Wonderful! Congratulations.

If you can, please, write some short info to help other people who could run into same problems.
Maybe what GPU card you use and version & settings for the miner program.

Many thanks and happy mining!

ico-russia701

member

Activity: 147

Merit: 10

I figured it out! Hooray! helped install the updated miner \ cgminer-3.7.3-kalroth-20140204

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 06:05:09 AM

Quote from: brakmic on May 02, 2018, 05:57:51 AM

Quote from: ico-russia701 on May 02, 2018, 05:55:28 AM

Thank you! I have corrected. But the situation has not changed!

I see you are using TWO times the same port 7337.
Maybe remove one of them.

no man, the problem has remained. You can advise another miner for the GPU

I don't know any other miner. Maybe other members with more mining experience could give you some hints.

But you should definitely try it once without config file. Just start from console. Type the whole command in. Others have already written command examples before. Just go back in this thread.

Cheers,

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 05:57:51 AM

Quote from: ico-russia701 on May 02, 2018, 05:55:28 AM

Thank you! I have corrected. But the situation has not changed!

I see you are using TWO times the same port 7337.
Maybe remove one of them.

no man, the problem has remained. You can advise another miner for the GPU

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:55:28 AM

Thank you! I have corrected. But the situation has not changed!

I see you are using TWO times the same port 7337.
Maybe remove one of them.

ico-russia701

member

Activity: 147

Merit: 10

Thank you! I have corrected. But the situation has not changed!

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:47:27 AM

Quote from: brakmic on May 02, 2018, 05:42:53 AM

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

I see your CONFIG file is not valid.
The last of the three entries contains an "url" without the closing "

You have to have this:

"url" : "the url data here"

but you have:

"url : the url data here"

You are MISSING an "

With data multipool miner works

So you added the missing "?

https://img1.picload.org/image/doddoclr/defect.png

If it works, then congratulations and happy mining! Grin

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 05:42:53 AM

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

I see your CONFIG file is not valid.
The last of the three entries contains an "url" without the closing "

You have to have this:

"url" : "the url data here"

but you have:

"url : the url data here"

You are MISSING an "

in the configuration file is specified exactly as you say

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 05:42:53 AM

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

I see your CONFIG file is not valid.
The last of the three entries contains an "url" without the closing "

You have to have this:

"url" : "the url data here"

but you have:

"url : the url data here"

You are MISSING an "

With data multipool miner works

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:45:16 AM

the problem is something else Huh

Check my previous posting. Your config data is not valid.
The JSON format is not valid!

ico-russia701

member

Activity: 147

Merit: 10

the problem is something else Huh

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

I see your CONFIG file is not valid.
The last of the three entries contains an "url" without the closing "

You have to have this:

"url" : "the url data here"

but you have:

"url : the url data here"

You are MISSING an "

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 05:39:40 AM

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

Good. Now you should be mining.
And if not, just try it from the console. Also, don't forget to use the -a scrypt flag to indicate what algorithm your miner should use.

this should be specified in the .bat file?

dogebearman

full member

Activity: 711

Merit: 204

Quote from: brakmic on May 02, 2018, 03:53:51 AM

Quote from: dogebearman on May 02, 2018, 03:23:00 AM

Everything worked for me, I am actually mining this one with an i7-2620M ^^
Any recommendations regarding difficulty with such a low setup? I chose 8 for the beginning, can I go higher?
Thanks for this learning project btw. I already learned some things while setting this up.

There are three different difficulties you can choose from.
Click on "shitcoindeluxe" link in this page for more info:

http://104.156.231.46/getting_started

You can start low (or higher) and will automatically get more diffculty as the work progresses.

Thanks, I switched to difficulty 32 now. I just have a 15KH rate so I am not sure which difficulty to choose but I will see if I get some results now.

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:38:14 AM

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

Good. Now you should be mining.
And if not, just try it from the console. Also, don't forget to use the -a scrypt flag to indicate what algorithm your miner should use.

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 05:36:13 AM

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

as shown in the screenshot I have already done this

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 05:34:42 AM

I can not understand. What's wrong?

The stratum server IP-Address you are using is wrong. Simply replace it with this one: 104.156.231.46

But if you have already done this, then everything is OK and you should be mining.
However, please, try it WITHOUT a configuration. Just start the miner from the CONSOLE.

ico-russia701

member

Activity: 147

Merit: 10

I can not understand. What's wrong?

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 02:27:37 AM

Quote from: brakmic on May 02, 2018, 02:00:18 AM

Quote from: ico-russia701 on May 02, 2018, 01:56:59 AM

Quote from: brakmic on May 02, 2018, 01:50:25 AM

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

shows some error

Your device config is not correct. Try by changing flags. Or just without any extra flags.

EDIT:

Don't forget to ADD your SHT address to "user".

I can not solve this problem! The configuration works with the base data of the multipula. When I put this data
stratum + tcp: //104.156.231.146: 3032
stratum + tcp: //104.156.231.146: 3256
stratum + tcp: //104.156.231.146: 7337 in the configuration file, the miner does not start

Oops, you were using the wrong IP address.
This is surely because of some typo of mine.
Sorry, sorry. The correct IP is: 104.156.231.46

I will also check the original posting.

Topic: [ANN][SHITCOINDELUXE][SHT] Shitcoin DeLuxe - Learn, mine, and have fun with it! - page 6. (Read 1971 times)