[ANN][SHITCOINDELUXE][SHT] Shitcoin DeLuxe - Learn, mine, and have fun with it! - page 7.

brakmic

member

Activity: 461

Merit: 13

Quote from: dogebearman on May 02, 2018, 03:23:00 AM

Everything worked for me, I am actually mining this one with an i7-2620M ^^
Any recommendations regarding difficulty with such a low setup? I chose 8 for the beginning, can I go higher?
Thanks for this learning project btw. I already learned some things while setting this up.

There are three different difficulties you can choose from.
Click on "shitcoindeluxe" link in this page for more info:

http://104.156.231.46/getting_started

You can start low (or higher) and will automatically get more diffculty as the work progresses.

brakmic

member

Activity: 461

Merit: 13

Quote from: Apostle4444 on May 02, 2018, 03:43:12 AM

Quote from: ico-russia701 on May 02, 2018, 02:45:47 AM

Quote from: brakmic on May 02, 2018, 02:42:22 AM

Quote from: ico-russia701 on May 02, 2018, 02:36:33 AM

I MUST UNDERSTAND WHAT I DO WRONG

The best way is to start the program from console with only basic settings. Use configs when you know what you're doing.

you are talking about the basic settings of the multipool in the configuration file?

I'm using sgminer and I have created a mine.bat file with the following:

sgminer -o stratum+tcp://104.156.231.46:7337 -u my_sht_address -p x

I also rename the shtcoin.conf to old so it doesn't run.

I then run the mine.bat from a command prompt so i can see any errors.

hope this helps.

Many thanks for helping users!

Please add the scrypto algoritm, just to be sure: -a scrypt
AFAIK the scrypt algorithm will get selected automatically, but one can never know. Wink

Apostle4444

hero member

Activity: 832

Merit: 500

Quote from: ico-russia701 on May 02, 2018, 02:45:47 AM

Quote from: brakmic on May 02, 2018, 02:42:22 AM

Quote from: ico-russia701 on May 02, 2018, 02:36:33 AM

I MUST UNDERSTAND WHAT I DO WRONG

The best way is to start the program from console with only basic settings. Use configs when you know what you're doing.

you are talking about the basic settings of the multipool in the configuration file?

I'm using sgminer and I have created a mine.bat file with the following:

sgminer -o stratum+tcp://104.156.231.46:7337 -u my_sht_address -p x

I also rename the shtcoin.conf to old so it doesn't run.

I then run the mine.bat from a command prompt so i can see any errors.

hope this helps.

dogebearman

full member

Activity: 711

Merit: 204

Everything worked for me, I am actually mining this one with an i7-2620M ^^
Any recommendations regarding difficulty with such a low setup? I chose 8 for the beginning, can I go higher?
Thanks for this learning project btw. I already learned some things while setting this up.

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 02:44:03 AM

Quote from: brakmic on May 02, 2018, 02:41:11 AM

Quote from: ico-russia701 on May 02, 2018, 02:35:28 AM

such a picture

Congratulations!
Happy mining.

nothing to congratulate. Mining never started

Well, then, please, start from console. Then you will see errors.
Don't forget to use: -a scrypt
and: --userpass SHT_ADR: anything

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 02:42:22 AM

Quote from: ico-russia701 on May 02, 2018, 02:36:33 AM

I MUST UNDERSTAND WHAT I DO WRONG

The best way is to start the program from console with only basic settings. Use configs when you know what you're doing.

you are talking about the basic settings of the multipool in the configuration file?

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 02:41:11 AM

Quote from: ico-russia701 on May 02, 2018, 02:35:28 AM

such a picture

Congratulations!
Happy mining.

nothing to congratulate. Mining never started

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 02:36:33 AM

I MUST UNDERSTAND WHAT I DO WRONG

The best way is to start the program from console with only basic settings. Use configs when you know what you're doing.

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 02:35:28 AM

such a picture

Congratulations!
Happy mining.

ico-russia701

member

Activity: 147

Merit: 10

I MUST UNDERSTAND WHAT I DO WRONG

ico-russia701

member

Activity: 147

Merit: 10

such a picture

iso2000

newbie

Activity: 107

Merit: 0

Try to use this software.

Do not forget to change algorithm to scrypt.

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 02:27:37 AM

Quote from: brakmic on May 02, 2018, 02:00:18 AM

Quote from: ico-russia701 on May 02, 2018, 01:56:59 AM

Quote from: brakmic on May 02, 2018, 01:50:25 AM

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

shows some error

Your device config is not correct. Try by changing flags. Or just without any extra flags.

EDIT:

Don't forget to ADD your SHT address to "user".

I can not solve this problem! The configuration works with the base data of the multipula. When I put this data
stratum + tcp: //104.156.231.146: 3032
stratum + tcp: //104.156.231.146: 3256
stratum + tcp: //104.156.231.146: 7337 in the configuration file, the miner does not start

Could you simply start miner from console?

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 02:00:18 AM

Quote from: ico-russia701 on May 02, 2018, 01:56:59 AM

Quote from: brakmic on May 02, 2018, 01:50:25 AM

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

shows some error

Your device config is not correct. Try by changing flags. Or just without any extra flags.

EDIT:

Don't forget to ADD your SHT address to "user".

I can not solve this problem! The configuration works with the base data of the multipula. When I put this data
stratum + tcp: //104.156.231.146: 3032
stratum + tcp: //104.156.231.146: 3256
stratum + tcp: //104.156.231.146: 7337 in the configuration file, the miner does not start

brakmic

member

Activity: 461

Merit: 13

Quote from: Apostle4444 on May 02, 2018, 02:19:27 AM

Shit explorer appears to be broken as last date is 27th..

The code I'm using has some flaws. To find a transaction type block number first. Sorry, but as I am not the maintainer of the project (Iquidus Explorer) I can't do much for now. I am using all the needed scripts as described in their docs though.

But there is another explorer from other mining pool:

http://www.smilingmining.com/explorer/SHT

Cheers

Apostle4444

hero member

Activity: 832

Merit: 500

Shit explorer appears to be broken as last date is 27th..

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 01:56:59 AM

Quote from: brakmic on May 02, 2018, 01:50:25 AM

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

shows some error

Your device config is not correct. Try by changing flags. Or just without any extra flags.

EDIT:

Don't forget to ADD your SHT address to "user".

ico-russia701

member

Activity: 147

Merit: 10

Quote from: brakmic on May 02, 2018, 01:50:25 AM

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

shows some error

brakmic

member

Activity: 461

Merit: 13

Quote from: ico-russia701 on May 02, 2018, 01:33:14 AM

Hello! Tell me what to add to this file to start mining with the GPU ?

user: your SHT address
pass: anything

ico-russia701

member

Activity: 147

Merit: 10

Hello! Tell me what to add to this file to start mining with the GPU ?

Topic: [ANN][SHITCOINDELUXE][SHT] Shitcoin DeLuxe - Learn, mine, and have fun with it! - page 7. (Read 1971 times)