[ANN][SUPERCOIN] Unique Most Advanced Anonymous Trustless Multisig Technology - page 115.

Majormax

legendary

Activity: 2534

Merit: 1129

Quote from: jvdp on August 29, 2014, 04:43:51 AM

Quote from: Majormax on August 29, 2014, 04:37:19 AM

Quote from: jvdp on August 29, 2014, 04:33:30 AM

Quote from: Majormax on August 29, 2014, 04:31:22 AM

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

i did that, and its still broken... Its now also behind syncing with the network around 900 blocks.

Which nodes did you use in the .conf ?

I used the ones from the opening post.

I am currently on a resync (just started), so I will see what happens. ..BTW, did you use a complete new installation ?

CoinMin3r

hero member

Activity: 509

Merit: 500

Defend Bitcoin and its PoW: bitcoincleanup.com

Quote from: RCan06 on August 29, 2014, 04:30:14 AM

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

Re-syncing from scratch means delete everything except wallet.dat from supercoin folder from appdata >> start the wallet client >> close the client after some time >> create supercoin.conf on supercoin folder from appdata >> Start the client again & you're done.
Always take a backup of wallet.dat before doing anything.

Quote from: Majormax on August 29, 2014, 04:31:22 AM

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

Yeah but problem might be in a given node.
Actually it was working well until 26th but suddenly occured problem from 27th.So stakes after 27th can't be seen in explorer.

jvdp

hero member

Activity: 1148

Merit: 523

CryptoTalk.Org - Get Paid for every Post!

Quote from: Majormax on August 29, 2014, 04:37:19 AM

Quote from: jvdp on August 29, 2014, 04:33:30 AM

Quote from: Majormax on August 29, 2014, 04:31:22 AM

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

i did that, and its still broken... Its now also behind syncing with the network around 900 blocks.

Which nodes did you use in the .conf ?

I used the ones from the opening post.

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

I'm about 1000 blocks off (ahead) compared to both block explorers.

getmininginfo
"blocks" : 421809

Is this right?

It passes when I run repairwallet. Using the nodes from OP also.

Majormax

legendary

Activity: 2534

Merit: 1129

Quote from: jvdp on August 29, 2014, 04:33:30 AM

Quote from: Majormax on August 29, 2014, 04:31:22 AM

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

i did that, and its still broken... Its now also behind syncing with the network around 900 blocks.

Which nodes did you use in the .conf ?

Majormax

legendary

Activity: 2534

Merit: 1129

Quote from: RCan06 on August 29, 2014, 04:30:14 AM

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

Use the .conf file info from the OP (copy it to a text file named supercoin.conf)

Remove the whole supercoin folder from 'roaming' (best keep a copy)

Resync using a new installation: insert the supercoin.conf to the newly created supercoin folder at the beginning, and it should sync OK.

edit ..Wait for Dev to confirm good nodes.

jvdp

hero member

Activity: 1148

Merit: 523

CryptoTalk.Org - Get Paid for every Post!

Quote from: Majormax on August 29, 2014, 04:31:22 AM

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

i did that, and its still broken... Its now also behind syncing with the network around 900 blocks.

Majormax

legendary

Activity: 2534

Merit: 1129

Quote from: CoinMin3r on August 29, 2014, 04:22:25 AM

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

421750 ish is the correct current blockchain

RCan06

sr. member

Activity: 325

Merit: 255

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

jvdp

hero member

Activity: 1148

Merit: 523

CryptoTalk.Org - Get Paid for every Post!

my wallet keeps being out of sync, what is happening here? I am using the nodes in the OP.

CoinMin3r

hero member

Activity: 509

Merit: 500

Defend Bitcoin and its PoW: bitcoincleanup.com

My wallet stat:

Block chain

Current number of blocks 421745
Estimated total blocks 420685

Majormax

legendary

Activity: 2534

Merit: 1129

Quote from: supercointeam on August 29, 2014, 03:36:31 AM

Quote from: fairglu on August 29, 2014, 03:29:33 AM

Quote from: supercointeam on August 29, 2014, 03:19:36 AM

I am not sure what happens but it also happens in my desktop at start up.
I guess you host too many crypto coins on that server. It's maybe relate to operating system performance issue, open page limit or thread limit etc. so it bogged somehow.

Server CPU usage is about 90% idle overall (quad-core) with most of the usage being SuperCoind using 25% of one core, 2 GB of RAM are unused, plenty of bandwidth remaining (only using about 50 kBits/s according to nload).

However debug log lists a lot of getblocks requests and a regular stream of orphans, I suspect at least some of the surrounding nodes are stuck on a fork.

edit: CPU usage back to 100% of one core :/ (no worry, just annoying, I always oversize the wallet servers)

I sent you with PM some alive nodes you can try resync with them.

I have similar problems. My sendings have not arrived, and the last sync I tried was a disaster.

Are the nodes + .conf file in the OP correct , before I resync from scratch ?

supercointeam

full member

Activity: 196

Merit: 100

Quote from: fairglu on August 29, 2014, 03:29:33 AM

Quote from: supercointeam on August 29, 2014, 03:19:36 AM

I am not sure what happens but it also happens in my desktop at start up.
I guess you host too many crypto coins on that server. It's maybe relate to operating system performance issue, open page limit or thread limit etc. so it bogged somehow.

Server CPU usage is about 90% idle overall (quad-core) with most of the usage being SuperCoind using 25% of one core, 2 GB of RAM are unused, plenty of bandwidth remaining (only using about 50 kBits/s according to nload).

However debug log lists a lot of getblocks requests and a regular stream of orphans, I suspect at least some of the surrounding nodes are stuck on a fork.

edit: CPU usage back to 100% of one core :/ (no worry, just annoying, I always oversize the wallet servers)

I sent you with PM some alive nodes you can try resync with them.

fairglu

legendary

Activity: 1100

Merit: 1032

Quote from: supercointeam on August 29, 2014, 03:19:36 AM

I am not sure what happens but it also happens in my desktop at start up.
I guess you host too many crypto coins on that server. It's maybe relate to operating system performance issue, open page limit or thread limit etc. so it bogged somehow.

Server CPU usage is about 90% idle overall (quad-core) with most of the usage being SuperCoind using 25% of one core, 2 GB of RAM are unused, plenty of bandwidth remaining (only using about 50 kBits/s according to nload).

However debug log lists a lot of getblocks requests and a regular stream of orphans, I suspect at least some of the surrounding nodes are stuck on a fork.

edit: CPU usage back to 100% of one core :/ (no worry, just annoying, I always oversize the wallet servers)

supercointeam

full member

Activity: 196

Merit: 100

Quote from: fairglu on August 29, 2014, 03:17:16 AM

Quote from: supercointeam on August 29, 2014, 03:09:59 AM

You better close staking in the conf
staking=0

Added it, CPU usage is at 10% but seems to be slowly rising.

However the wallet shouldn't have been staking, as it held no funds (balance of zero and never received any funds), no?

10% is a good sign. I am not sure what happens but it also happens in my desktop at start up.
I guess you host too many crypto coins on that server. It's maybe relate to operating system performance issue, open page limit or thread limit etc. so it bogged somehow. Are you using linux? If so use ramdisk. And try to increase open page limit. I will investigate this issue bytheway.

I suggest also trying removing everything resync from the scratch with nodes from OP. It looks someone fixed issue by doing this.
http://www.peercointalk.org/index.php?topic=2659.0

fairglu

legendary

Activity: 1100

Merit: 1032

Quote from: supercointeam on August 29, 2014, 03:09:59 AM

You better close staking in the conf
staking=0

Added it, CPU usage is at 10% but seems to be slowly rising.

However the wallet shouldn't have been staking, as it held no funds (balance of zero and never received any funds), no?

edit: 25% CPU usage after a few minutes

supercointeam

full member

Activity: 196

Merit: 100

Quote from: fairglu on August 29, 2014, 03:05:07 AM

Quote from: supercointeam on August 28, 2014, 11:46:06 PM

You need to wait about 5-10 minutes it will be over. Be patient and dont kill the process it will be ok. It also happens on my desktop at first opening it uses overly the resources.

bytheway thank you for updating the version we love to use your block explorer.

Thanks

However the wallet is still using 100% CPU, and has been at 100% all night.

It also accumulated a huge debug log in those few hours (43 MB), there is lot of lines like

Quote

ERROR: CheckProofOfStake() : INFO: check kernel failed on coinstake 7e457da8166f90a89a1064d4b6145d9833a8f3420444a11175c1b658f779156d, hashProof=eb094e32ca0ff070355b01e8d93a1533be27a49d01054da21e8842e1a7bdcaa5
WARNING: ProcessBlock(): check proof-of-stake failed for block e0e7e29edb951a51bc2c0c3683bfc983789ec5dcb5add9002cbca2375e67556e
ERROR: ProcessBlock() : AcceptBlock FAILED
received block e0e7e29edb951a51bc2c

(the exact same coinstake appears again and again)

Rest of the debug log is mostly about getblocks.

You better close staking in the conf
staking=0

fairglu

legendary

Activity: 1100

Merit: 1032

Quote from: supercointeam on August 28, 2014, 11:46:06 PM

You need to wait about 5-10 minutes it will be over. Be patient and dont kill the process it will be ok. It also happens on my desktop at first opening it uses overly the resources.

bytheway thank you for updating the version we love to use your block explorer.

Thanks

However the wallet is still using 100% CPU, and has been at 100% all night.

It also accumulated a huge debug log in those few hours (43 MB), there is lot of lines like

Quote

ERROR: CheckProofOfStake() : INFO: check kernel failed on coinstake 7e457da8166f90a89a1064d4b6145d9833a8f3420444a11175c1b658f779156d, hashProof=eb094e32ca0ff070355b01e8d93a1533be27a49d01054da21e8842e1a7bdcaa5
WARNING: ProcessBlock(): check proof-of-stake failed for block e0e7e29edb951a51bc2c0c3683bfc983789ec5dcb5add9002cbca2375e67556e
ERROR: ProcessBlock() : AcceptBlock FAILED
received block e0e7e29edb951a51bc2c

(the exact same coinstake appears again and again)

Rest of the debug log is mostly about getblocks.

supercointeam

full member

Activity: 196

Merit: 100

Quote from: ycz on August 29, 2014, 02:10:41 AM

Quote from: telematico on August 29, 2014, 01:57:07 AM

Quote from: ycz on August 29, 2014, 01:47:18 AM

I have a question regarding the source code.

The code on github is still V1.5 (non-anon), while the windows wallet is V3.0 (Trustless with Multisig) right?

So the latest version of wallet client software is not open source for now. Is there plan to open the source? Thanks!

It would be unwise to release the code, at least not before 1 year

First of all, I asked because, if possible, I would like to run the supercoin wallet with my Linux box (arm CPU). It seems to me that there is even no Mac version for V3.0. Currently, only Windows binary distribution.

Secondly, isn't "open source" part of the most important attracting force in the cryptocurrency world? If something must remain closed source without being externally examined or audited, its trustworthiness might be challenged.

If V3.0 must remain closed source, I would like to ask the dev that: Can I run the V1.5 code on github for only supporting the network and doing the staking (if I don't need to do SuperSend and other advanced stuff)? Are these versions compatible on the fundamental functionality?

Sure you can

supercointeam

full member

Activity: 196

Merit: 100

Quote from: ycz on August 29, 2014, 01:47:18 AM

I have a question regarding the source code.

The code on github is still V1.5 (non-anon), while the windows wallet is V3.0 (Trustless with Multisig) right?

So the latest version of wallet client software is not open source for now. Is there plan to open the source? Thanks!

There is no plan for short term.

Topic: [ANN][SUPERCOIN] Unique Most Advanced Anonymous Trustless Multisig Technology - page 115. (Read 288859 times)