It seems to be crashing much too often in the past few hours, so I restart it and set the Core speed a bit lower, or set the intensity 1 down.
Right now, I = 18 and 1135, 1500 for 470 Kh/s. So from 1.9 Mh/s it went to 1.88 Mh/s. That's probably a good compromise for stability and here's hoping it won't crash anymore.
*edit*
On second thought, this might be a temperature issue. I'll need to investigate on this a bit. In any case, if it runs too hot, I will have to slow it down so it runs cool enough.
Now down to 1125, 1500 at 480 Kh/s but back to Intensity 20.
Topic: [ANN][TAG] TAGMining.Com is now the official pool of Tagcoin! - page 4. (Read 45653 times)
February 14, 2014, 01:20:49 AM
February 13, 2014, 11:08:59 PM
Quote
GPU Status Temp Load Rate Accept/Invalid GPU Family Fan% (rpm) Core Memory Power
0 63.0 c 99% 490 Kh/s 3 / 0 0.00% 200 Series 80% (3894) 1150 Mhz 1500 Mhz 1.163v
1 57.0 c 99% 490 Kh/s 1 / 0 0.00% 200 Series 80% (3830) 1150 Mhz 1500 Mhz 1.188v
2 63.0 c 99% 490 Kh/s 6 / 0 0.00% 200 Series 80% (3826) 1150 Mhz 1500 Mhz 1.163v
3 63.0 c 99% 490 Kh/s 5 / 0 0.00% 200 Series 80% (3685) 1150 Mhz 1500 Mhz 1.188v
0 63.0 c 99% 490 Kh/s 3 / 0 0.00% 200 Series 80% (3894) 1150 Mhz 1500 Mhz 1.163v
1 57.0 c 99% 490 Kh/s 1 / 0 0.00% 200 Series 80% (3830) 1150 Mhz 1500 Mhz 1.188v
2 63.0 c 99% 490 Kh/s 6 / 0 0.00% 200 Series 80% (3826) 1150 Mhz 1500 Mhz 1.163v
3 63.0 c 99% 490 Kh/s 5 / 0 0.00% 200 Series 80% (3685) 1150 Mhz 1500 Mhz 1.188v
I copied the cgminer.conf settings. I took out the flash drive. I stuffed BAMT 1.3 back to it. Put it back. Turned it on. Edited cgminer.conf to be exactly the same.
Now my hash rates are back to "normal".
I'm just going to dial down either the intensity or the core speed as 1150 is just a bit tad too high I think.
February 13, 2014, 06:33:59 PM
Congrats Dabs.
280X's pull up to 275w each, not sure what 280's pull, I'd wager close to the same. No way you can run 5 of them on one PSU. You'd need at least 1500w for that.
If I were running 5 gpu's, I'd be wanting to run 270/270X's. You could put those on a 1050w PSU.
Heey Guys.
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
280X's pull up to 275w each, not sure what 280's pull, I'd wager close to the same. No way you can run 5 of them on one PSU. You'd need at least 1500w for that.
If I were running 5 gpu's, I'd be wanting to run 270/270X's. You could put those on a 1050w PSU.
Strange. Because i had 3 hd6990 running on 1200 watt with out a problem. And those cards are real energy users. But i gonna look further for a good psu
February 13, 2014, 06:22:33 PM
What would you guys suggest for a x6 280x rig?
I was planning on having 4 cards and the mobo powered by a 1200w and then the other 2 cards on a 650w. I feel like the 1200w might be overloaded though. Any suggestions?
I could purchase an 850w to power 2 cards and the mobo and have the 1200w just power the 4 cards, which would make me sleep a little better at night lol.
I could always use VBE7 and flash the gigabyte BIOS to lower the voltage, a little but I have never messed with that stuff before and don't want to wreck an cards.
I was planning on having 4 cards and the mobo powered by a 1200w and then the other 2 cards on a 650w. I feel like the 1200w might be overloaded though. Any suggestions?
I could purchase an 850w to power 2 cards and the mobo and have the 1200w just power the 4 cards, which would make me sleep a little better at night lol.
I could always use VBE7 and flash the gigabyte BIOS to lower the voltage, a little but I have never messed with that stuff before and don't want to wreck an cards.
February 13, 2014, 08:54:49 AM
Congrats Dabs.
280X's pull up to 275w each, not sure what 280's pull, I'd wager close to the same. No way you can run 5 of them on one PSU. You'd need at least 1500w for that.
If I were running 5 gpu's, I'd be wanting to run 270/270X's. You could put those on a 1050w PSU.
Heey Guys.
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
280X's pull up to 275w each, not sure what 280's pull, I'd wager close to the same. No way you can run 5 of them on one PSU. You'd need at least 1500w for that.
If I were running 5 gpu's, I'd be wanting to run 270/270X's. You could put those on a 1050w PSU.
February 13, 2014, 05:09:53 AM
270's do seem to be the card to choose... I am getting 1.5Mh/s at 670W... hoping to trim that by 50W... but still not as efficient as 270's
February 13, 2014, 04:41:18 AM
That's really wide spacing, LOL! I think I'll have to space out mine a little bit more when it moves to its permanent home.
Watt Meter shows 650 ~ 670 watts for my 1.8 ~ 1.9 MH/s (R9 270s doing 455 kh/s each). I'll try to bump up this speed using the older BAMT, but this one actually seems more stable now.
Watt Meter shows 650 ~ 670 watts for my 1.8 ~ 1.9 MH/s (R9 270s doing 455 kh/s each). I'll try to bump up this speed using the older BAMT, but this one actually seems more stable now.
February 13, 2014, 04:25:59 AM
the latest veggie crate miner...
1.5Mh/s with ease...
1.5Mh/s with ease...
February 13, 2014, 04:11:49 AM
Code:
sgminer 4.0.0 - Started: [2014-02-13 09:03:33]
--------------------------------------------------------------------------------
(5s):1.753M (avg):1.795Mh/s | A:9216 R:128 HW:0 WU:1496.1/m
ST: 2 SS: 0 NB: 7 LW: 84 GF: 0 RF: 0
Connected to Pool 0 (stratum) diff 512 as user Dabs.1
Block: 4a13c1dc... Diff:1.15M Started: [09:08:09] Best share: 328K
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 67.0C 3774RPM | 452.9K/452.3Kh/s | R: 0.0% HW:0 WU: 354.0/m I:20
GPU 1: 60.0C 3855RPM | 452.8K/452.3Kh/s | R: 5.3% HW:0 WU: 411.4/m I:20
GPU 2: 71.0C 3852RPM | 452.0K/452.3Kh/s | R: 0.0% HW:0 WU: 387.4/m I:20
GPU 3: 75.0C 3894RPM | 453.2K/452.3Kh/s | R: 0.0% HW:0 WU: 361.8/m I:20
--------------------------------------------------------------------------------
[09:08:37] Accepted 1f0b3ddf Diff 2.11K/512 GPU 3 at Pool 0
[09:08:39] Accepted 0db1798a Diff 4.79K/512 GPU 0 at Pool 0
[09:08:41] Accepted 636ce3b0 Diff 659/512 GPU 2 at Pool 0
Finally got 4 GPUs working. Replaced the riser. Replaced the part that plugs into the slot. Replaced the USB cable. Replaced the SATA power cable. Plugged it in. Now it works.
So, I'm not sure but maybe I might have a couple of defective risers. I'll do more testing at home.
On the other hand, I upgraded to Litecoin BAMT 1.5 and the hash rates went lower with the same settings. I'll rewrite 1.3 and see if that improves, maybe it's the Catalyst driver versions.
February 12, 2014, 09:54:50 PM
I'll mess with it in a bit and see if moving them around works. But I had 3 running fine, and I think they were all right next to each other (via the risers). Oh, wait, one 1x has another 1x beside it. I know the 4x slot works cuz that's how it was used prior to having the risers. I'll move one card over and see if that fixes it.
But then, that would mean, my motherboard can't handle 5 GPUs, only 4, unless I get to the BIOS (and I'll need to connect a keyboard to it.)
But then, that would mean, my motherboard can't handle 5 GPUs, only 4, unless I get to the BIOS (and I'll need to connect a keyboard to it.)
February 12, 2014, 08:17:17 PM
Can't quite tell how you have it configured there Dabs, but the first two things that come to mind... on some motherboards, there are a pair of 1x slots next to each other and one will be disabled when the other is in use. You could try moving the PCIe connectors around. Another thought since you are using powered risers, make sure all the power connectors are tight. Maybe one of them isn't getting power from the riser.
I second the vote on Seasonic. Very happy with mine. For mining purposes, I think single 12v rail is mandatory. Multiple 12v rails seems like asking for trouble. I think I lucked out with my 1600w LEPA. I did have to move a couple things around on one to keep it from shutting off. It has six 12v rails. 4 x 30A and 2x 20A iirc.
I second the vote on Seasonic. Very happy with mine. For mining purposes, I think single 12v rail is mandatory. Multiple 12v rails seems like asking for trouble. I think I lucked out with my 1600w LEPA. I did have to move a couple things around on one to keep it from shutting off. It has six 12v rails. 4 x 30A and 2x 20A iirc.
February 12, 2014, 08:08:15 PM
AFK.MPEG, for PSU, I recommend Seasonic. That's what I have, and I think vesper has the exact same 1050 watt PSU.
@everyone else, I can't get my motherboard to recognize the 4th GPU. It hashes fine with 3. I'll have to do some experimenting to find out if anything is busted, or if I need to change some BIOS settings.
Dabs Rig with 4 GPUs
Any tips or clues or whatever I need to do appreciated, although I'm going to be trying something, maybe swapping them around to see what I need to do.
GPUs are upside down. I will secure them permanently once I get them all working properly. I might do a vertical orientation, or a flat one, or something. Or maybe make it look like everyone else's veggie crates.
Motherboard is supposed to be able to handle 5 GPUs.
Specs:
GA-970A-DS3P
Seasonic X-1050 1050W 80Plus Gold Full Modular Power Supply
AMD Sempron 145 2.80GHz P1,350
Zeppelin 2GB DDR3
Sapphire R9-270 Dual-X OC 2GB DDR5 Boost
Powered Riser USB Style
AData USB Flash Drive with Litecoin BAMT 1.3 (sgminer 4.0.0) ... have 1.5 on standby if needed, but this one works with 3 GPUs right now.
and a bunch of veggie crates.
@everyone else, I can't get my motherboard to recognize the 4th GPU. It hashes fine with 3. I'll have to do some experimenting to find out if anything is busted, or if I need to change some BIOS settings.
Dabs Rig with 4 GPUs
Any tips or clues or whatever I need to do appreciated, although I'm going to be trying something, maybe swapping them around to see what I need to do.
GPUs are upside down. I will secure them permanently once I get them all working properly. I might do a vertical orientation, or a flat one, or something. Or maybe make it look like everyone else's veggie crates.
Motherboard is supposed to be able to handle 5 GPUs.
Specs:
GA-970A-DS3P
Seasonic X-1050 1050W 80Plus Gold Full Modular Power Supply
AMD Sempron 145 2.80GHz P1,350
Zeppelin 2GB DDR3
Sapphire R9-270 Dual-X OC 2GB DDR5 Boost
Powered Riser USB Style
AData USB Flash Drive with Litecoin BAMT 1.3 (sgminer 4.0.0) ... have 1.5 on standby if needed, but this one works with 3 GPUs right now.
and a bunch of veggie crates.
February 12, 2014, 06:13:47 PM
Heey Guys.
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
I have my Asrock Pro BTC. Now im looking for a goog GPU. What do you recommend as a good PSU??
I was thinking of a 1200 wat PSU sow must be enough for 5 R9270 of 280. What do you guys think??
February 11, 2014, 09:59:52 AM
I got my risers. USB 3 types. I plugged it in, then set my GPUs upside down, and they are all hashing (only 3 so far, I lent 1 to my brother in law.)
One got sick, so I dialed down the settings to 1145, 1500, but still using older BAMT 1.3. Haven't had time to upgrade to 1.5 but I'll do some testing soon as I already downloaded the image file.
Is there a thread for your other pools? or is it okay to discuss potcoin here? hehehe.
One got sick, so I dialed down the settings to 1145, 1500, but still using older BAMT 1.3. Haven't had time to upgrade to 1.5 but I'll do some testing soon as I already downloaded the image file.
Is there a thread for your other pools? or is it okay to discuss potcoin here? hehehe.
I haven't really made a thread for the pool network yet. I'll work on it soon. I've got a shitty situation on my hands right now, literally lol:
I came home late last night to the plumbing in the house being messed up again. I spent like 3 hours working on it, snaking pipes, replacing wax rings on toilets that were bad, and the water in the house still will not drain. So I'm without water essentially, as there is no where for it to go.
So give me a day or so and I'll create a thread for the pool network. In the meantime though, you can discuss anything here, mate. We do anyways lol.
-Fuse
February 11, 2014, 09:16:03 AM
I got my risers. USB 3 types. I plugged it in, then set my GPUs upside down, and they are all hashing (only 3 so far, I lent 1 to my brother in law.)
One got sick, so I dialed down the settings to 1145, 1500, but still using older BAMT 1.3. Haven't had time to upgrade to 1.5 but I'll do some testing soon as I already downloaded the image file.
Is there a thread for your other pools? or is it okay to discuss potcoin here? hehehe.
One got sick, so I dialed down the settings to 1145, 1500, but still using older BAMT 1.3. Haven't had time to upgrade to 1.5 but I'll do some testing soon as I already downloaded the image file.
Is there a thread for your other pools? or is it okay to discuss potcoin here? hehehe.
February 09, 2014, 03:45:47 PM
What's going on right now? The pool is offline, my unconfirmed balance has disappeared, and the blocks all show as orphaned... Missing about 40 tag right now.
Yeah, the TAG network is having issues again. I have posted about it in the main TAG thread. You're not alone, mate. I'm down about 400TAG right now that I will need to put back into the pool to get payouts started again.
-Fuse
February 09, 2014, 03:15:15 PM
Notice:
I have found approximately 60-65 accounts that are being used on the pool coming from the same IP addresses (mostly China), using the same wallet payout address. They all have different emails, usernames, etc.
I believe at this time that this user is exploiting a hack that can be read about here:
https://github.com/MPOS/php-mpos/issues/1072
I have closed registration on Tagmining, and I have deleted all the accounts tied to this user.
POOL OPS: if you would like the user's information, PM me and I will send you the CSV with the accounts, IP, and addresses the user used.
If anyone has a question or concern, feel free to PM me.
-Fuse
I have found approximately 60-65 accounts that are being used on the pool coming from the same IP addresses (mostly China), using the same wallet payout address. They all have different emails, usernames, etc.
I believe at this time that this user is exploiting a hack that can be read about here:
https://github.com/MPOS/php-mpos/issues/1072
I have closed registration on Tagmining, and I have deleted all the accounts tied to this user.
POOL OPS: if you would like the user's information, PM me and I will send you the CSV with the accounts, IP, and addresses the user used.
If anyone has a question or concern, feel free to PM me.
-Fuse
What's going on right now? The pool is offline, my unconfirmed balance has disappeared, and the blocks all show as orphaned... Missing about 40 tag right now.
February 09, 2014, 10:23:28 AM
Yes.
Okee guys. I orderd 2 asrock h81 btc pro moterboads with 2 pentium dual cores. And 2 gigs ram. 2 march i gonna order 2 psu and 4 hd 270x. And april if it works out the remaining 6 gpus for my mining facility.
Cant wait
Okee guys. I orderd 2 asrock h81 btc pro moterboads with 2 pentium dual cores. And 2 gigs ram. 2 march i gonna order 2 psu and 4 hd 270x. And april if it works out the remaining 6 gpus for my mining facility.
Cant wait
NICE!
Keep us updated, mate!
-Fuse
February 09, 2014, 03:39:21 AM
Yes.
Okee guys. I orderd 2 asrock h81 btc pro moterboads with 2 pentium dual cores. And 2 gigs ram. 2 march i gonna order 2 psu and 4 hd 270x. And april if it works out the remaining 6 gpus for my mining facility.
Cant wait
Okee guys. I orderd 2 asrock h81 btc pro moterboads with 2 pentium dual cores. And 2 gigs ram. 2 march i gonna order 2 psu and 4 hd 270x. And april if it works out the remaining 6 gpus for my mining facility.
Cant wait
February 08, 2014, 10:11:16 AM
Notice:
I have found approximately 60-65 accounts that are being used on the pool coming from the same IP addresses (mostly China), using the same wallet payout address. They all have different emails, usernames, etc.
I believe at this time that this user is exploiting a hack that can be read about here:
https://github.com/MPOS/php-mpos/issues/1072
I have closed registration on Tagmining, and I have deleted all the accounts tied to this user.
POOL OPS: if you would like the user's information, PM me and I will send you the CSV with the accounts, IP, and addresses the user used.
If anyone has a question or concern, feel free to PM me.
-Fuse
I have found approximately 60-65 accounts that are being used on the pool coming from the same IP addresses (mostly China), using the same wallet payout address. They all have different emails, usernames, etc.
I believe at this time that this user is exploiting a hack that can be read about here:
https://github.com/MPOS/php-mpos/issues/1072
I have closed registration on Tagmining, and I have deleted all the accounts tied to this user.
POOL OPS: if you would like the user's information, PM me and I will send you the CSV with the accounts, IP, and addresses the user used.
If anyone has a question or concern, feel free to PM me.
-Fuse
Jump to: