Edit: So strange. Tried Coinotron same message about being unable to connect. Just now tried the Redpoint TRC pool and it works.
Topic: [ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 247. (Read 424138 times)
June 14, 2013, 09:15:43 PM
Hm.. so far I've tried to use your pool 3 times in the past and I can never connect.
Edit: So strange. Tried Coinotron same message about being unable to connect. Just now tried the Redpoint TRC pool and it works.
Edit: So strange. Tried Coinotron same message about being unable to connect. Just now tried the Redpoint TRC pool and it works.
June 14, 2013, 05:44:28 PM
The profit calculation on multipool.com is different from coinchoose.com and from coinwarz.com. Why? How can I be sure that I am always mining the most profitable coin, if there are different calculation results?
Those sites don't account for stales and such due to fast block times. Multipool does.
If a coin has 20% stales because it has 10s blocks, the calculation coinchoose/coinwarz has is way off (by 20%).
June 14, 2013, 05:28:20 PM
The profit calculation on multipool.com is different from coinchoose.com and from coinwarz.com. Why? How can I be sure that I am always mining the most profitable coin, if there are different calculation results?
June 14, 2013, 05:21:31 PM
The profit calculations for LTC, TRC and FTC just went away, so it is defaulting to the next highest.
EDIT: I think it is because BTC-e is down.
EDIT: I think it is because BTC-e is down.
June 14, 2013, 04:42:38 PM
Am i not allowed to start mining Terracoin if Litecoin in the middle of the header on the page?
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
The one listed in the middle is just what the port 7777 one is using (the switcher). The rest are separate.
What issue are you getting/what error?
"pool 0 JSON stratum auth failed: (null)"
Also i am using the worker and pass. Not my login info.
The pool doesn't check the password, so that means your worker name is probably misspelled.
On that note, I wonder why the pass is even requested, or used at all anywhere. Seems a little stupid. I mean if people want my worker pass so they can earn me free money, I'd gladly give it over, lol. There's nothing being protected by having it.
June 14, 2013, 04:40:39 PM
Am i not allowed to start mining Terracoin if Litecoin in the middle of the header on the page?
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
The one listed in the middle is just what the port 7777 one is using (the switcher). The rest are separate.
What issue are you getting/what error?
"pool 0 JSON stratum auth failed: (null)"
Also i am using the worker and pass. Not my login info.
The pool doesn't check the password, so that means your worker name is probably misspelled.
June 14, 2013, 03:46:33 PM
Just out of curiosity, where is your server located?
"Located in Amazon's West Coast data center (Oregon)"
OK. Ugh, I love the multiport feature, but its so far im only getting a 75% accepted share rate. And I live in Illinois. It has to be my pathetic Frontier internet.
I have around an 80% on some coins. With LTC it's 100% or very close to it. The issue is some coins have a time of like less than a minute, so a lot of shares will be lost regardless of the pool.
June 14, 2013, 01:02:56 PM
Am i not allowed to start mining Terracoin if Litecoin in the middle of the header on the page?
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
The one listed in the middle is just what the port 7777 one is using (the switcher). The rest are separate.
What issue are you getting/what error?
"pool 0 JSON stratum auth failed: (null)"
Also i am using the worker and pass. Not my login info.
June 14, 2013, 12:32:19 PM
Just out of curiosity, where is your server located?
"Located in Amazon's West Coast data center (Oregon)"
OK. Ugh, I love the multiport feature, but its so far im only getting a 75% accepted share rate. And I live in Illinois. It has to be my pathetic Frontier internet.
June 14, 2013, 12:30:21 PM
Just out of curiosity, where is your server located?
"Located in Amazon's West Coast data center (Oregon)"
June 14, 2013, 10:25:35 AM
Just out of curiosity, where is your server located?
June 14, 2013, 08:57:36 AM
I'm compiling NVC on a t1.micro instance right now.
My plan is the following: If things go well (i.e. if the micro instance is sufficient to handle the load of novacoind + stratum server, which it should be, in fact I may be able to put 2 coins on it) I plan to sell 10,000 WDC (~1 BTC, heh) from the pool reserves (about half our WDC reserves) to purchase a 3 year heavy utilization reserved instance ($100). The recurring charges for the instance will then only be ~$10 per month. ($3.75 for the server at $0.005 per hour, plus bandwidth and I/O, both of which should be fairly low.)
If things work out, I will probably move the other coins onto their own micro instances as I receive funds. That frees up the current server to be a dedicated DB and would potentially allow me to move it outside of Amazon if I want to.
Anyone see a flaw in my thinking?
My plan is the following: If things go well (i.e. if the micro instance is sufficient to handle the load of novacoind + stratum server, which it should be, in fact I may be able to put 2 coins on it) I plan to sell 10,000 WDC (~1 BTC, heh) from the pool reserves (about half our WDC reserves) to purchase a 3 year heavy utilization reserved instance ($100). The recurring charges for the instance will then only be ~$10 per month. ($3.75 for the server at $0.005 per hour, plus bandwidth and I/O, both of which should be fairly low.)
If things work out, I will probably move the other coins onto their own micro instances as I receive funds. That frees up the current server to be a dedicated DB and would potentially allow me to move it outside of Amazon if I want to.
Anyone see a flaw in my thinking?
Only the increased latency possibly increasing the stale rate. Not sure how big an effect it is, but I'm sure communication between instances is pretty fast regardless.
June 14, 2013, 07:48:24 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
Based on a previous post, my understanding is that the script takes a little while to process the cash out. It won't show up immediately either as it's updated every 15m(?) or so.
Over the time of 2 days I have tried multiple times, my balance just doesn't change.
EDIT: Never mind - It worked
!Did you do something different over the past couple days? I haven't cashed anything out yet so wondering if there was a special step you did this time or something.
No, not really. It just worked
.Got ya. Thanks,
. 
June 14, 2013, 07:44:16 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
Based on a previous post, my understanding is that the script takes a little while to process the cash out. It won't show up immediately either as it's updated every 15m(?) or so.
Over the time of 2 days I have tried multiple times, my balance just doesn't change.
EDIT: Never mind - It worked
!Did you do something different over the past couple days? I haven't cashed anything out yet so wondering if there was a special step you did this time or something.
No, not really. It just worked
. June 14, 2013, 07:40:37 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
Based on a previous post, my understanding is that the script takes a little while to process the cash out. It won't show up immediately either as it's updated every 15m(?) or so.
Over the time of 2 days I have tried multiple times, my balance just doesn't change.
EDIT: Never mind - It worked
!Did you do something different over the past couple days? I haven't cashed anything out yet so wondering if there was a special step you did this time or something.
June 14, 2013, 07:36:46 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
Based on a previous post, my understanding is that the script takes a little while to process the cash out. It won't show up immediately either as it's updated every 15m(?) or so.
Over the time of 2 days I have tried multiple times, my balance just doesn't change.
EDIT: Never mind - It worked
! June 14, 2013, 07:30:56 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
Based on a previous post, my understanding is that the script takes a little while to process the cash out. It won't show up immediately either as it's updated every 15m(?) or so.
June 14, 2013, 07:29:33 AM
I can't cash out my WDC.
What am I doing wrong?
So far I did that:
What am I doing wrong?
So far I did that:
- Saved my address
- Press "cash out"
June 14, 2013, 07:11:09 AM
Am i not allowed to start mining Terracoin if Litecoin in the middle of the header on the page?
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
Shot in the dark: Remove --scrypt from cgminer if you haven't.I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
Also, you use your worker name and worker's password, not your account name and account password.
June 14, 2013, 07:10:12 AM
Am i not allowed to start mining Terracoin if Litecoin in the middle of the header on the page?
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
I have been trying everything to connect to stratum+tcp://multipool.in:3333 to mine TRC but i cant. I am using the correct username and password too.
The one listed in the middle is just what the port 7777 one is using (the switcher). The rest are separate.
What issue are you getting/what error?
Jump to: