Seems like you had your wallet unlocked?
Strange reserve balance would make any difference otherwise.
Good to hear you're ontop of things now.
Topic: [ANN][TRICK] TrickyCoin : x11 : NEW QT5 WALLET WITH IRC CHAT - page 8. (Read 26612 times)
up and running, to the moon we go 
Please post what seems to have solved your iproblem incase others have similar issues.
wallet paused at block 15000
so added
reservebalance=1000000
dns=1
dnsseed=1
listen=1
this got me past 1500 and upto date
removed after 15 mins
reservebalance=1000000
dns=1
dnsseed=1
listen=1
Now staking, Windows wallet working fine.
up and running, to the moon we go
Please post what seems to have solved your iproblem incase others have similar issues.
up and running, to the moon we go
Just wait 5 mins from when you sync to network to start staking.
Should work, if not then try devs suggestion.
Should work, if not then try devs suggestion.
oooo,, done something and all good, thankyou guys
downloaded 15000 blocks, paid first pos now zero connections, stuck at block 15000
I have tested this method several times and it works for everyone that tried it so far.
OK bad new is this fix shuts off staking. But at least wallet will work while I continue to figure it out
%appdata%/trickycoin
Remove all except your conf and wallet.dat
If you remove your wallet.dat all your coins are lost. SO BACK IT UP FIRST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Change conf to this
rpcallowip=127.0.0.1
rpcuser=youruser
rpcpassword=yourpass
addnode=5.231.235.32
addnode=trick.coin-miners.info
addnode=https://trick.minerpools.com:
addnode=http://rapture1.cloudapp.net:8080/
addnode=http://hashgoal.com/pool/TRIC/
addnode=node.coin-miners.com
addnode=node.trickycoin.com
rpcport=13413
port=13414
reservebalance=1000000
dns=1
dnsseed=1
listen=1
of course you can play with those settings. The reservebalance part stops staking
UPDATE. I did the following and allowed peers.dat to fully update. Wait about 5 mins
Then i REMOVED reservebalance=1000000 and restarted wallet
After about 20 mins I also removed
dns=1
dnsseed=1
listen=1
Nice to hear.
Staking is going smoothly on my end.
Make sure you leave your wallets locked while you sync to the netwrok.
Little pissed I missed the start of staking.
Staking is going smoothly on my end.
Make sure you leave your wallets locked while you sync to the netwrok.
Little pissed I missed the start of staking.
oooo,, done something and all good, thankyou guys
downloaded 15000 blocks, paid first pos now zero connections, stuck at block 15000
oooo,, done something and all good, thankyou guys
If all else fails just follow the long long post I made when I first got it working again. I think everyone that did that is working fine right now.
Just be careful to not delete your wallet.dat
Make a copy
Just be careful to not delete your wallet.dat
Make a copy
A few people have mentioned they cannot get their wallet to sync to the network.
This is because you need to create a trickycoin.conf file.
I have uploaded my config file onto mega.
Simply copy/paste the file into your USER/ROAMING/TRICKYCOIN folder then restart the client.
https://mega.co.nz/#!1UV2DaoR!B-_NPoN5T0sYHGPsui-gxW0YKCj8pwbkUSvrmm7HvF0
This is because you need to create a trickycoin.conf file.
I have uploaded my config file onto mega.
Simply copy/paste the file into your USER/ROAMING/TRICKYCOIN folder then restart the client.
https://mega.co.nz/#!1UV2DaoR!B-_NPoN5T0sYHGPsui-gxW0YKCj8pwbkUSvrmm7HvF0
Here
thanks, says catching up now, but still zero connections
Added a while back. Once we mint some coins I will add a much better conf section. First i want to make sure all is well
I hope everyone took advantage of those final big blocks.
Pos is going to rip pow apart from here on.
Watch the blocks go.. Blink and you'll miss it.
Pos is going to rip pow apart from here on.
Watch the blocks go.. Blink and you'll miss it.
A few people have mentioned they cannot get their wallet to sync to the network.
This is because you need to create a trickycoin.conf file.
I have uploaded my config file onto mega.
Simply copy/paste the file into your USER/ROAMING/TRICKYCOIN folder then restart the client.
https://mega.co.nz/#!1UV2DaoR!B-_NPoN5T0sYHGPsui-gxW0YKCj8pwbkUSvrmm7HvF0
This is because you need to create a trickycoin.conf file.
I have uploaded my config file onto mega.
Simply copy/paste the file into your USER/ROAMING/TRICKYCOIN folder then restart the client.
https://mega.co.nz/#!1UV2DaoR!B-_NPoN5T0sYHGPsui-gxW0YKCj8pwbkUSvrmm7HvF0
Here
This is my windows wallet nodes from conf file
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
can you post your conf file please
I uploaded a working conf file all you do is put it in your roaming/trickycoin folder.
Dev add to OP please.
This is my windows wallet nodes from conf file
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
can you post your conf file please
This is my windows wallet nodes from conf file
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
EDIT: this is my conf file
addnode=5.231.235.32
addnode=node.coin-miners.info
and my wallet is synced just fine , i'm on the same blocks as my pool
EDIT: and the stake is working just fine , i just received my first stake
EDIT: this is my conf file
Code:
listen=1
rpcallowip=127.0.0.1
rpcuser=yourusername
rpcpassword=yourpassword
addnode=5.231.235.32
addnode=node.coin-miners.info
done first bit with conf and wallet, now wont sync
I am tracking down what the heck is happening.
I may be offline in forums but I am steady looking for issue.
For now I advise stop transferring to wallet from pools.
Any programmers wanna help PM me
I may be offline in forums but I am steady looking for issue.
For now I advise stop transferring to wallet from pools.
Any programmers wanna help PM me
Have you set a checkpoint?
I believe we may of had a minor fork. It happens sometimes on a hybrid PoW/PoS
Now lets mint!
Now lets mint!
Jump to: