Topic: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World - page 61. (Read 331629 times)

Go to the backup account drop down menu and select accounts which will pop up in a different window, use the keystore file and save to whatever you use to backup your wallets.  That is your backup file.

Hi Phil.  I mine with 6x PNY GTX 1060 3gb cards.  I get 23.5mh/s Eth and 180 mh/s SC per card.  Once I run the Claymore 9.7 dual miner (make sure you use this updated version), I press the "-" key until it gets to 23.  This controls how much hash goes to each coin and 23 is what I found works best for me because I wanted to focus on Eth.

My Afterburner settings are:
65% Power
Temp at 67 degrees (I have a box fan next to rig and it never goes above 57 degrees)
Auto fans
748 memory
20 core clock

The memory is the most important.  I found the core clock adds little to nothing but if you go over 125 core clock you will crash alot.  My rig runs stable, it never crashes.

Found these settings on a ETH fourum link below - GTX 1060 3 GB; Afterburner settings: power limit 65%, core clock +140 (2062 MHz boost), memory clock +1000 (9.6 GHz); HWiNFO GPU Power 128 W, 1050 mV, 56 C, fan 100% gave 22.5 MH. I have no idea if this will help I am totally new to mining just trying to help. The link to the thread 

https://forum.ethereum.org/discussion/12705/why-is-no-one-mining-on-gtx-1060-3gb-im-getting-23-mh-s-from-one-oced-card

Hey everyone, new miner here. I am at a month long training course, stuck in a hotel. I have always been intrigued with mining and I have been very bored so I put a small starter rig together. I am not getting the hash rate that I believe I should be though. I am running the claymore dual miner, mining Ubiq and Sia. I am using Gigabyte GTX 1060 3G dual fan cards. I have played with the OC setting a bit on afterburner, but the highest I can get is around 18Mh/s. I have seen other people on youtube report 22 or 23 out of this card. If I overclock the core much the screen will turn black after a minute. If I OC the memory I get artifacts. I have seen some people run with the memory clock maxed out though, and mine won't do that.

Does anyone else use a 1060? What are your afterburner settings?

Thanks!

Is the file itself the private key?  It is named something that starts with "UTC" but I can't open it.  I'm not accustomed to this sort of backup.

Hi guys, another ubiq pool..
Ubq.minandoando.com

There's an option to backup your keys. The wallet will open the folder where your keys are being held. Copy/paste.

I'm setting my rig up to mine UBIQ.  I downloaded the Fusion desktop wallet and have created an account.  I want to record my private key but cant find where it is.  All I did was input a password and I can see my address but don't I need to make a backup of the private key?

Hi all,

What means "Initial coin supply of only 36,451,770 in year zero"
Who has these coins?

Thanks

Well that's very odd. Can you link the cancelled trans id?

Try if you have possible a better connection to our pool:

EU: stratum+tcp://eu.ubiq.minerpool.net:8008

http://ubiq.minerpool.net

We need some hashpower 

Yes, it does.
It is connected to 25 peers at the moment.
I am using Fusion GUI wallet.
Sorry about that *sweats*

I tried sending 1 ubiq coin and it did get confirmed. But when i try sending more than 1 it gets 0 conformations then gets cancelled.

you should type more infomaition here then we can help you slove this issue ,don't bless your words

Has your wallet synchronized? Are you using the web wallet? Not enough information.

Hello everyone,

I'm new to UBIQ ... i have 23 ubiq in my wallet but everytime i try sending it to bitrex it gets 0 conformations and cancelled.
I tried increasing fees charge to max but still the same.
What am i doing wrong?

some changes on ubiqpool.io? I have problem with downloading API from my Android app today. All other pools run OK. I see api in browser, but app has problem with proxy, which hasn't yesterday. thanks for help.

HI all,

Not sure what is the problem, but I am getting only this in my miner
*********************
clEnqueueWriteBuffer(-38)
  m  09:08:13|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:15|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  i  09:08:16|stratum  Received new job #b32
  m  09:08:17|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:19|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:21|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:23|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:25|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:27|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:29|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:31|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:33|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:35|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:37|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:39|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:41|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:43|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:45|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:47|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  m  09:08:49|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
  i  09:08:51|stratum  Received new job #b33
  m  09:08:51|main  Mining on PoWhash #3618e1aa : 0.00MH/s [A0+0:R0+0:F0]
*********************

I use ethminer-0.9.41-genoil-1.1.7-cuda6.5
this is my run script:
ethminer.exe -G -SP 2 -S ubiq.suprnova.cc:3030 -O sknaren.myWorker:$workerZ01A

Regards.

I also have quite high pings up to 800ms..

can I restore my fusion wallet with my pass-code? I have accidentally deleted the backup file. 

Hi!

I mine on ubiqpool.io

I found a block two days ago. What that means? Will a get some kind of reward or nothing?

Thanks