there are 2 ico prices:
6 to 1 vrc/vrm or 10 to 1 vrc/vrm. now your btc price depends on your vrc aquisition price but i estimate for most should be between 60-120k sats/vrm
Topic: [ANN][VRM] Verium PoWT | CPU mining | scrypt² | Scaling | New Roadmap Released - page 80. (Read 250032 times)
September 20, 2016, 02:06:53 AM
September 20, 2016, 01:25:47 AM
The volume is tiny, guys you don't trade? BTC7.58709186 volume. Anyone nice could tell me the ico price? I wanna buy below ico price.
September 20, 2016, 01:02:21 AM
how can I find out my vrm balance on pool ?
September 20, 2016, 12:52:43 AM
I've fixed the bug which meant I had to reset the pool every few minutes...
Pool will still be up and down over then next few hours as I have to sort out hashrate's and general UI changes.
One of the downtime's will be migrating to a dedicated box so I can setup a testnet on the current box for development to reduce downtime
While I was making these changes we hit our first block!
No payments will go out with this block as the minimum payout is set to 10VRM but once the block is confirmed you should be able to see your earning for that block here:
http://www.cpuminers.com/pool/VRM/block/6334
Thanks for your patience today wasn't the launch I was hoping for. Spent 2 days testing obviously need more
Pool will still be up and down over then next few hours as I have to sort out hashrate's and general UI changes.
One of the downtime's will be migrating to a dedicated box so I can setup a testnet on the current box for development to reduce downtime
While I was making these changes we hit our first block!
No payments will go out with this block as the minimum payout is set to 10VRM but once the block is confirmed you should be able to see your earning for that block here:
http://www.cpuminers.com/pool/VRM/block/6334
Thanks for your patience today wasn't the launch I was hoping for. Spent 2 days testing obviously need more
Is possible to mine with 2-3 devices on the same address on your pool , right?
Thanks
September 19, 2016, 10:51:26 PM
I've fixed the bug which meant I had to reset the pool every few minutes...
Pool will still be up and down over then next few hours as I have to sort out hashrate's and general UI changes.
One of the downtime's will be migrating to a dedicated box so I can setup a testnet on the current box for development to reduce downtime
While I was making these changes we hit our first block!
No payments will go out with this block as the minimum payout is set to 10VRM but once the block is confirmed you should be able to see your earning for that block here:
http://www.cpuminers.com/pool/VRM/block/6334
Thanks for your patience today wasn't the launch I was hoping for. Spent 2 days testing obviously need more
Pool will still be up and down over then next few hours as I have to sort out hashrate's and general UI changes.
One of the downtime's will be migrating to a dedicated box so I can setup a testnet on the current box for development to reduce downtime
While I was making these changes we hit our first block!
No payments will go out with this block as the minimum payout is set to 10VRM but once the block is confirmed you should be able to see your earning for that block here:
http://www.cpuminers.com/pool/VRM/block/6334
Thanks for your patience today wasn't the launch I was hoping for. Spent 2 days testing obviously need more
September 19, 2016, 07:59:58 PM
Sorry guys pool is coming down till I can remove redis completely and stop the invalid miners from crashing the server
Its just not stable enough with this many connections with the invalid ones aswell.
Should be back up in the next few hours.
Ill keep you updated.
Its just not stable enough with this many connections with the invalid ones aswell.
Should be back up in the next few hours.
Ill keep you updated.
September 19, 2016, 07:53:43 PM
keep getting
[2016-09-20 03:46:11] ...retry after 10 seconds
[2016-09-20 03:46:23] Stratum connection failed: Failed to connect to cpuminers.com port 3333: Connection refused
Are you restarting the pool or there's something wrong?
[2016-09-20 03:46:11] ...retry after 10 seconds
[2016-09-20 03:46:23] Stratum connection failed: Failed to connect to cpuminers.com port 3333: Connection refused
Are you restarting the pool or there's something wrong?
Restarting to pool each time it throws errors atm while I solve the underlying issue.
September 19, 2016, 07:49:24 PM
keep getting
[2016-09-20 03:46:11] ...retry after 10 seconds
[2016-09-20 03:46:23] Stratum connection failed: Failed to connect to cpuminers.com port 3333: Connection refused
Are you restarting the pool or there's something wrong?
[2016-09-20 03:46:11] ...retry after 10 seconds
[2016-09-20 03:46:23] Stratum connection failed: Failed to connect to cpuminers.com port 3333: Connection refused
Are you restarting the pool or there's something wrong?
September 19, 2016, 07:42:47 PM
any chance of getting the OP updated with miner link and pool address? That way those new to VRM can find all the info in one post rather then scanning the thread?
September 19, 2016, 07:31:08 PM
Although my hashrate is around 1000 H/s while mining over wallet, cpuminer shows 40 H/s. What am i doing wrong?
This cpuminer seems very optimized I'm testing it now, but most likely you have 1000 H/m and 40 H/s with this miner. More than double speed potentially.
Is it possible to use this cpuminer for solo mining?
No but you can use this one which is same hashrate it seems, other one is forked from but you can solomine. https://github.com/tpruvot/cpuminer-multi/
September 19, 2016, 07:04:07 PM
Everything ok now it seems is mining.
[2016-09-20 00:02:08] MESSAGE FROM SERVER: Welcome to CPUMiners.com, enjoy your stay! - http://www.cpuminers.com
[2016-09-20 00:02:08] Stratum detected new block
[2016-09-20 00:02:08] MESSAGE FROM SERVER: Welcome to CPUMiners.com, enjoy your stay! - http://www.cpuminers.com
[2016-09-20 00:02:08] Stratum detected new block
September 19, 2016, 06:50:19 PM
Pool is down for a few minutes while i work out what to do about this address: VGHWMct9mMLigdiCm2cWmG62MAYdPbwvAu
If you have this address please contact me your submitting hundreds of low difficulty shares crashing the pool cause each share needs 128 mb of ram to check it...
If you have this address please contact me your submitting hundreds of low difficulty shares crashing the pool cause each share needs 128 mb of ram to check it...
[2016-09-19 23:48:49] Starting Stratum on stratum+tcp://cpuminers.com:3333
[2016-09-19 23:48:49] 8 miner threads started, using 'scrypt' algorithm.
[2016-09-19 23:48:49] Binding thread 0 to cpu 0
[2016-09-19 23:48:49] Binding thread 4 to cpu 4
[2016-09-19 23:48:49] Binding thread 1 to cpu 1
[2016-09-19 23:48:49] Binding thread 5 to cpu 5
[2016-09-19 23:48:49] Binding thread 6 to cpu 6
[2016-09-19 23:48:49] Binding thread 7 to cpu 7
[2016-09-19 23:48:49] Binding thread 3 to cpu 3
[2016-09-19 23:49:19] stratum_subscribe timed out
[2016-09-19 23:49:19] ...retry after 30 seconds
is you pool back?
I am trying to mine with this add ...x4onMQUBproPhF maybe you need to unblock or something
Thanks
I know I put wrong stratum but still now
[2016-09-19 23:53:47] Stratum connection failed: Failed to connect to vrm.cpuminers.com port 3333: Connection refused
[2016-09-19 23:53:47] ...retry after 30 seconds
September 19, 2016, 06:22:02 PM
Pool is down for a few minutes while i work out what to do about this address: VGHWMct9mMLigdiCm2cWmG62MAYdPbwvAu
If you have this address please contact me your submitting hundreds of low difficulty shares crashing the pool cause each share needs 128 mb of ram to check it...
If you have this address please contact me your submitting hundreds of low difficulty shares crashing the pool cause each share needs 128 mb of ram to check it...
September 19, 2016, 06:03:10 PM
still hold my VRM,I bought 120k, go go VRM 
September 19, 2016, 06:01:34 PM
7 threads can only run.8 threads does not work
26x60=1560H/m is better than in my wallet,it was 1150H/m
September 19, 2016, 05:50:24 PM
Although my hashrate is around 1000 H/s while mining over wallet, cpuminer shows 40 H/s. What am i doing wrong?
This cpuminer seems very optimized I'm testing it now, but most likely you have 1000 H/m and 40 H/s with this miner. More than double speed potentially.
Is it possible to use this cpuminer for solo mining?
September 19, 2016, 05:47:29 PM
Does anyone know what cpu miner we could use for Ubuntu Linux and how to install it for the pool?
September 19, 2016, 05:41:33 PM
Although my hashrate is around 1000 H/s while mining over wallet, cpuminer shows 40 H/s. What am i doing wrong?
This cpuminer seems very optimized I'm testing it now, but most likely you have 1000 H/m and 40 H/s with this miner. More than double speed potentially.
Oh sorry you are right.
September 19, 2016, 05:41:04 PM
Although my hashrate is around 1000 H/s while mining over wallet, cpuminer shows 40 H/s. What am i doing wrong?
As effectsToCause said nothing wrong your wallet shows in H/m the other miner shows in H/s.
So your actually mining at 2400 H/s.
Update for everyone on the pool:
Having a few stability issues with the redis backend shouldn't effect your mining as its used for caching and I am keeping a close eye on it.
You might see the pool restart from time to time as I resolve these issues.
Suggestions for minimum payout?
September 19, 2016, 05:38:27 PM
Although my hashrate is around 1000 H/s while mining over wallet, cpuminer shows 40 H/s. What am i doing wrong?
This cpuminer seems very optimized I'm testing it now, but most likely you have 1000 H/m and 40 H/s with this miner. More than double speed potentially.
Jump to: