[ANN/WTS]3rd Halving Coldkey - Copper variant avail - Gold/Silver/Copper variant - page 3.

yogg

legendary

Activity: 2464

Merit: 3158

Hey everyone !

Thank you so much for the overwhelming reaction and great feedbacks about this release to commemorate Bitcoin's third halving !
Lucho Poletti indeed did an awesome work.
He managed to perfectly capture the spirit of the piece we imagined and wanted to create for you.

The auction for the Gold variants is now over.
Many thanks to Krogoth for hosting it ! It's been quite an auction !
Thank you to every participant.

An update about the Silver and Copper variants :

The Silver 3rd Bitcoin Halving Coldkeys will be released soon here on Bitcointalk.
Be on the lookout for a WTS thread in this Collectibles section. They should be available in around a week.
We will make sure to proceed in such a way so the most people can get theirs.

More informations about the release of the Copper 3rd Bitcoin Halving Coldkeys will be available after the Silver variant has been made available.

Thank you very much for looking and for your awesome reception of our latest release.

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: krogothmanhattan on July 25, 2020, 06:49:50 PM

I cannot wait until Mopar mining makes some for these cards.

yep - just waiting for the acrylic to come in!

krogothmanhattan

legendary

Activity: 2520

Merit: 3238

The Stone the masons rejected was the cornerstone.

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

Well the ebay holder arrived and wanted to share some photos of what these card will look like in a holder.

Even thought the size is a bit large, they look amazing! I cannot wait until Mopar mining makes some for these cards.

I inserted the two cards with the seperation and also without.

seek3r

legendary

Activity: 1260

Merit: 2014

Quote from: cygan on July 18, 2020, 02:27:38 AM

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

Hi cygan,

hope I can help you out with ur question.
As chronicsky already mentioned this release is a special series to celebrate the BTCitcoin Halving 2020 and it doesnt affect the History Series.
The Q3 versions of the History Series will be released soon. yogg already announced the release in his ANN thread title of the History Series (" Q3 coming soon! ")

chronicsky

legendary

Activity: 2828

Merit: 1222

Just looking for peace

Quote from: cygan on July 18, 2020, 02:27:38 AM

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

AFAIK, these are special 3rd halving cards, and not part of history coldkey monthly release

cygan

legendary

Activity: 3262

Merit: 8492

icarus-cards.eu

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: krogothmanhattan on July 17, 2020, 07:51:56 PM

Quote from: MoparMiningLLC on July 17, 2020, 07:43:12 PM

Quote from: anonymousminer on July 16, 2020, 09:18:56 PM

Quote from: MoparMiningLLC on July 16, 2020, 09:16:11 PM

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey. Lol Roll Eyes

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

I probably would...would like to see one first

done deal - I was told they are the same size as the other coldkeys - so, I will use two of the ones I have to make it. will post some pics hopefully this weekend.

I have to order thinner acrylic so my first one will be proof of concept more or less as it will be thicker than I would use to make the actual ones --- and in addition, i could do these for single cards too --- the thing about the ones linked above, is that they are sized for sports cards - unless I am mistaken - if that is true, they will be too big and the coldkeys will slide around.

I can make these for double and single.

krogothmanhattan

legendary

Activity: 2520

Merit: 3238

The Stone the masons rejected was the cornerstone.

Quote from: MoparMiningLLC on July 17, 2020, 07:43:12 PM

Quote from: anonymousminer on July 16, 2020, 09:18:56 PM

Quote from: MoparMiningLLC on July 16, 2020, 09:16:11 PM

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey. Lol Roll Eyes

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

I probably would...would like to see one first

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: anonymousminer on July 16, 2020, 09:18:56 PM

Quote from: MoparMiningLLC on July 16, 2020, 09:16:11 PM

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey. Lol Roll Eyes

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

anonymousminer

legendary

Activity: 1456

Merit: 1242

Quote from: axax on July 17, 2020, 09:53:18 AM

These are impressive, what material are they made of?

https://bitcointalksearch.org/topic/m.50565285

axax

member

Activity: 109

Merit: 17

Just another BTC user.

These are impressive, what material are they made of?

krogoth

full member

Activity: 1298

Merit: 176

Krogothmanhattan alt account

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

Found same type on ebay for 5.98 with free shipping...exception is the screws show as per pic shown.

Will take a pic and post once item arrives.

hulla

hero member

Activity: 1834

Merit: 566

Good team will only implement an awesome stuff and it will be an amazing gift for my two boys.
👍

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: anonymousminer on July 16, 2020, 09:18:56 PM

Quote from: MoparMiningLLC on July 16, 2020, 09:16:11 PM

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey. Lol Roll Eyes

ok - I have 3 of them - i did not know if this edition was sized differently - I hate to assume anything. you know what they say about assumption?

anonymousminer

legendary

Activity: 1456

Merit: 1242

Quote from: MoparMiningLLC on July 16, 2020, 09:16:11 PM

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey. Lol Roll Eyes

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: ChiBitCTy on July 16, 2020, 08:10:08 PM

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

ChiBitCTy

legendary

Activity: 2282

Merit: 3014

Quote from: Sat0shisGhost on July 16, 2020, 11:52:59 AM

Quote from: Mitchell on July 16, 2020, 03:50:45 AM

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing. ColdKey continues to kill it with each release!

MoparMiningLLC

legendary

Activity: 2198

Merit: 2353

EIN: 82-3893490

Quote from: ?? on ??

Quote from: SatsLife on July 16, 2020, 04:33:11 PM

These are beautifully looking and crafted ColdCards! A great idea splitting them like that. Looking forward to adding these to my collection. And Lucho has some of the most original ideas and bitcoin art!

Glad to see Lucho launch something here on the forum as well. Please list more art here

His worked was featured in some of the previous Lynx collection artwork prints that were offered here.
So this is his ~~2nd~~ release on the forum Wink

man I really like some of those! I am going to be on the look out for 4 or 5 of those if they ever come up again!

SatsLife

hero member

Activity: 796

Merit: 519

These are beautifully looking and crafted ColdCards! A great idea splitting them like that. Looking forward to adding these to my collection. And Lucho has some of the most original ideas and bitcoin art!

Glad to see Lucho launch something here on the forum as well. Please list more art here

suzanne5223

hero member

Activity: 2660

Merit: 651

Want top-notch marketing for your project, Hire me

Brilliant ideas and i like the fact that you guys released as a contribution to the future time when Bitcoin became scarcer as Yogg claimed
Good job Yogg, Krog, their partner(Lucho Poletti) and all parties involved.

Topic: [ANN/WTS]3rd Halving Coldkey - Copper variant avail - Gold/Silver/Copper variant - page 3. (Read 2306 times)