Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 57. (Read 351555 times)

Quote from: Remember remember the 5th of November on May 27, 2014, 06:39:21 PM

Seems that this version is not optimised for HD58** and HD59** series.
I have 4 gpu rig that has 5300Mh/s with regular miner
but with this version instead to get more Mh/s i got just half of that, about 2000 Mh/s.
Changed everything in config file, tried with just a bat file, but no success.
Anyone has a clue ?

drivers v13.2
haven't tried with 14.4 yet, it will make a difference ?

Yes, you need to use -k x11mod, not darkcoin as the kernel.

i am already using -k x11mod.
Is there a solution ?

Please try last updated sources.

unlock.mk

sr. member

Activity: 448

Merit: 250

Quote from: t00tie on May 28, 2014, 06:18:56 AM

Seems that this version is not optimised for HD58** and HD59** series.
I have 4 gpu rig that has 5300Mh/s with regular miner
but with this version instead to get more Mh/s i got just half of that, about 2000 Mh/s.
Changed everything in config file, tried with just a bat file, but no success.
Anyone has a clue ?

drivers v13.2
haven't tried with 14.4 yet, it will make a difference ?

Yes, you need to use -k x11mod, not darkcoin as the kernel.

i am already using -k x11mod.
Is there a solution ?

lasybear

member

Activity: 113

Merit: 14

Seems that this version is not optimised for HD58** and HD59** series.
I have 4 gpu rig that has 5300Mh/s with regular miner
but with this version instead to get more Mh/s i got just half of that, about 2000 Mh/s.
Changed everything in config file, tried with just a bat file, but no success.
Anyone has a clue ?

drivers v13.2
haven't tried with 14.4 yet, it will make a difference ?

I have this exact same problem.
My 5970 runs at 2*1.687Mh/s on the last version in this thread which is locked at I 15. With it my 290 only gets 2.7Mh.
When I tried the newer version with unlocked I my 290 increased to 3.4 but the 5970 drops to 2*200Kh, losing me almost 3Mh total.

I would really appreciate it if someone could fix this?

cards:
7970 flashed to 280X
7950
290
5970 (two gpus)

Code:

"kernel" : "x11mod",
"expiry" : "30",
"failover-switch-delay" : "10",
"scan-time" : "30",
"queue" : "2",
"intensity" : "15,15,15,15,15",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "2,2,2,2,2",
"gpu-threads" : "2,2,2,2,2",
"thread-concurrency" : "30592,8192,30592,8192,8192",
"gpu-engine" : "1050,1100,1000,830,830",
"gpu-fan" : "85,85,85,85,85",
"gpu-memclock" : "1500,1400,1500,1200,1200",
"gpu-powertune" : "0,0,0,0,0",
"gpu-vddc" : "0.000,0.000,1.100,1.040,1.040",
"temp-cutoff" : "96,96,96,96,96",
"temp-overheat" : "95,95,95,95,95",
"temp-target" : "80,80,80,80,80"

Please try last updated sources.

t00tie

newbie

Activity: 18

Merit: 0

Quote from: lasybear on May 28, 2014, 05:50:24 AM

Seems that this version is not optimised for HD58** and HD59** series.
I have 4 gpu rig that has 5300Mh/s with regular miner
but with this version instead to get more Mh/s i got just half of that, about 2000 Mh/s.
Changed everything in config file, tried with just a bat file, but no success.
Anyone has a clue ?

drivers v13.2
haven't tried with 14.4 yet, it will make a difference ?

I have this exact same problem.
My 5970 runs at 2*1.687Mh/s on the last version in this thread which is locked at I 15. With it my 290 only gets 2.7Mh.
When I tried the newer version with unlocked I my 290 increased to 3.4 but the 5970 drops to 2*200Kh, losing me almost 3Mh total.

I would really appreciate it if someone could fix this?

cards:
7970 flashed to 280X
7950
290
5970 (two gpus)

Code:

"kernel" : "x11mod",
"expiry" : "30",
"failover-switch-delay" : "10",
"scan-time" : "30",
"queue" : "2",
"intensity" : "15,15,15,15,15",
"worksize" : "128,128,128,128,128",
"lookup-gap" : "2,2,2,2,2",
"gpu-threads" : "2,2,2,2,2",
"thread-concurrency" : "30592,8192,30592,8192,8192",
"gpu-engine" : "1050,1100,1000,830,830",
"gpu-fan" : "85,85,85,85,85",
"gpu-memclock" : "1500,1400,1500,1200,1200",
"gpu-powertune" : "0,0,0,0,0",
"gpu-vddc" : "0.000,0.000,1.100,1.040,1.040",
"temp-cutoff" : "96,96,96,96,96",
"temp-overheat" : "95,95,95,95,95",
"temp-target" : "80,80,80,80,80"

Elun

member

Activity: 117

Merit: 10

Sources was updated.
Added x13mod support.

Ask Remember remember the 5th of November or Elun for windows build.

Ok. I will try to build it, and say about result as soon as possible.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: saykor on May 28, 2014, 04:24:03 AM

Quote from: lasybear on May 28, 2014, 05:50:24 AM

Each version update for this miner increases the virus warning.

Went from 4 to 7, and now is 9/53.

https://www.virustotal.com/en/file/5e743541da039a860f7dc4ee469a0df2b00c64800766b43cdab1a3ca7c041ddf/analysis/1401249717/

Not complaining, just a heads up to the wonderful folks developing and compiling.

BTW, miner is open sourced an you can inspect code and compile your own version )

Sure everyone can inspect the code and can compile his own version... Because everyone know C++ and linux

You are completely wrong, if you think I'm c++ and linux guru.

If you understand the source code to know that there not have a virus then you have more knowledge from most users.
But you talk as everyone know what you know.

actually is very to spot a malicious code, just search for a bitcoin address in it lol

or something that search in your roaming to copy your wallet

Sources was updated.
Added x13mod support.

Ask Remember remember the 5th of November or Elun for windows build.

not uploaded yet? the one in the op seems the old one

ok nevermind, only the source is available

btw what you guys use to compile?

lasybear

member

Activity: 113

Merit: 14

Sources was updated.
Added x13mod support.

Ask Remember remember the 5th of November or Elun for windows build.

Nexillus

full member

Activity: 169

Merit: 100

Also for those scanning this miner on virustotal. Go scan the original SGMINER or the original CGMINER and see if it also gets flagged. Your scanning the same program that has been used on several crypto bot nets of course its going to flag on virus scanners.

All I can say is wow. People these days.

As for looking at the source, its pretty obvious most of the time if there is something malicious within the code if you have access to the source not including with all the teach savy people here if it was true to have all the "viruses" that virustotal is saying it is malicious you think something would say something? Yup, generally people are pretty quick with it just like how the 2% one was reversed within a week. Have some common sense now people, please.

SomeRelax

sr. member

Activity: 350

Merit: 250

it would be great if you share setting for 280x and 7950 on X13 algorithm (boostcoin)
thanks

saykor

sr. member

Activity: 350

Merit: 250

Quote from: ozzy1926 on May 28, 2014, 03:51:47 AM

Each version update for this miner increases the virus warning.

Went from 4 to 7, and now is 9/53.

https://www.virustotal.com/en/file/5e743541da039a860f7dc4ee469a0df2b00c64800766b43cdab1a3ca7c041ddf/analysis/1401249717/

Not complaining, just a heads up to the wonderful folks developing and compiling.

BTW, miner is open sourced an you can inspect code and compile your own version )

Sure everyone can inspect the code and can compile his own version... Because everyone know C++ and linux

You are completely wrong, if you think I'm c++ and linux guru.

If you understand the source code to know that there not have a virus then you have more knowledge from most users.
But you talk as everyone know what you know.

lasybear

member

Activity: 113

Merit: 14

Each version update for this miner increases the virus warning.

Went from 4 to 7, and now is 9/53.

https://www.virustotal.com/en/file/5e743541da039a860f7dc4ee469a0df2b00c64800766b43cdab1a3ca7c041ddf/analysis/1401249717/

Not complaining, just a heads up to the wonderful folks developing and compiling.

BTW, miner is open sourced an you can inspect code and compile your own version )

Sure everyone can inspect the code and can compile his own version... Because everyone know C++ and linux

You are completely wrong, if you think I'm c++ and linux guru.

any plan to use upgrade this miner for boostcoin?

Testing now.
Raw preresults: 280x 2.4MH/s, 270x 1.6MH/s

ozzy1926

sr. member

Activity: 378

Merit: 250