[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 53.

Litecoin

full member

Activity: 126

Merit: 100

Quote from: lasybear on May 28, 2014, 10:17:02 PM

If anybody help me to resolve issue with 5xxx/6xxx cards?
Please start miner with
sgminer -c -D -T > output.log
after 10-15 sec press Ctrl+C and send me created file output.log to PM.

Im using 5k series cards. All the problems went away when removed the 13.1 drivers and installed 14.4
All miners with 5k, 6k and 7 series cards are working just fine. 13.11 gave me HW errors like everything else older than 14.4

Cheers.

platinum4

sr. member

Activity: 547

Merit: 250

Got this working flawlessly with x13mod, and Elun's patches for uptime and idle GPU ADL.

3.15MH/s per R9 290X, should be noted that degrees temperature is in the median between scrypt and x11 (scrypt 94C - x13 86C - x11 72C) so whatever this kernel is doing it's ripping up the GPUs again. I think we're getting close to full GPU expenditure with this optimized software.

Thanks to girino to spawn such collaborative efforts amongst others here in this thread to make an ultimately better, free of donations, with failover - fast miner!

Y'all are the shit keep up the good work, for right now x13 got my lights back to flickering again.

3ham3

full member

Activity: 137

Merit: 100

All versions\ stages of this miner are resulting in nothing but hw errors ( "invalid nonce" share rejected) for me.

Running 13.12 modded for 6-7 GPUs from one of those tech websites.
280x all settings tried.

Would be great if this miner works with 13.12, as I would like to roll out to my farm..

MrBlacky

newbie

Activity: 41

Merit: 0

Quote from: drmavis on May 29, 2014, 12:00:32 AM

Has anybody had any luck with this software with the new Catalyst 14.6 beta drivers?

I just gave it a try and was initially very excited because I was getting hash rate of 4 MH/s on my 280X. Then I noticed that I was getting lots of HW hardware errors, which I had none before. No matter how much I lower the intensity (tried 11) I still get lots of HW errors. I then tried deleting the new x11modTahitiglg2tc8192w128I4.bin and restoring the old .bin file (from Catalyst 14.4) and now I get no HW errors but my hash rate isn't quite as good as it was previously.

Why would the new Catalyst drivers change the OpenCL compiling so dramatically to cause hardware errors?

I have 13.12 and no matter what settings I try I just keep getting HW errors with the x13mod.
I haven't tried with 14.4.

Regarding OpenCL in the new 14.4 drivers, this is an interesting issue:
http://devgurus.amd.com/thread/168625

drmavis

member

Activity: 69

Merit: 10

Has anybody had any luck with this software with the new Catalyst 14.6 beta drivers?

I just gave it a try and was initially very excited because I was getting hash rate of 4 MH/s on my 280X. Then I noticed that I was getting lots of HW hardware errors, which I had none before. No matter how much I lower the intensity (tried 11) I still get lots of HW errors. I then tried deleting the new x11modTahitiglg2tc8192w128I4.bin and restoring the old .bin file (from Catalyst 14.4) and now I get no HW errors but my hash rate isn't quite as good as it was previously.

Why would the new Catalyst drivers change the OpenCL compiling so dramatically to cause hardware errors?

cooman

newbie

Activity: 8

Merit: 0

My cards are HD5750,some HW error and no Accepted.
PM you output.log,Thanks!

lasybear

member

Activity: 113

Merit: 14

If anybody help me to resolve issue with 5xxx/6xxx cards?
Please start miner with
sgminer -c -D -T > output.log
after 10-15 sec press Ctrl+C and send me created file output.log to PM.

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: xIIImaL on May 28, 2014, 09:00:34 PM

5800,6900 series cards dont work with x13mod...shame.. only hw errors and no accepted shares.. Huh

so sad..

Seems like the x13mod is optimized for GCN cards and not the VLIW cards. Had to use the regular marucoin kernel to mine.

skefa

newbie

Activity: 4

Merit: 0

Quote from: ellave on May 28, 2014, 08:16:36 PM

This showing improvements for X13? What you guys getting with a 280x?

using x13mod with my 270 (non-x) i get 1.55 per card

Wolf_Pack

sr. member

Activity: 386

Merit: 250

Is anyone using xintensity instead of intensity? I can get 512 to work well with my 270, but I can't find a sweet spot for my 280x.

Elun

member

Activity: 117

Merit: 10

Quote from: ellave on May 28, 2014, 08:47:06 PM

I have the same card, now at 2.5 with I=16, HW errors at i-18.

Just to confirm I am talking about x13 algo

Yes, x13.
Hmm. Ok. May it depends from other hardware:
I have 2 videocards o my PC: 5770(working + games) and R9 280(mining) and 32Gb RAM. Maybe this mod requires more system memory. How much do you have? Or maybe it's just hardware luck variance. My vga bios version: 015.041.000.000.000000(113-AD47800-101)

xIIImaL

legendary

Activity: 1372

Merit: 1005

5800,6900 series cards dont work with x13mod...shame.. only hw errors and no accepted shares.. Huh

so sad..

ellave

sr. member

Activity: 434

Merit: 250

Quote from: Elun on May 28, 2014, 08:43:47 PM

Quote from: reflexmk on May 28, 2014, 06:01:50 PM

Quote from: reflexmk on May 28, 2014, 05:31:18 PM

Does the binary include the fix needed to mine with NiceHash.com? Is the idlebug fixed? Thanks

bump

You mean sick extended time? Yes, sick time is extended.

Quote from: ellave on May 28, 2014, 08:37:49 PM

Quote from: ellave on May 28, 2014, 08:16:36 PM

This showing improvements for X13? What you guys getting with a 280x?

To answer my own question I went from 1.45 to 1.87

Check your configuration. I got 2.7 with R9280X-DC2T-3GD5 here: https://bitcointalksearch.org/topic/m.6990258

I have the same card, now at 2.5 with I=16, HW errors at i-18.

Just to confirm I am talking about x13 algo

Elun

member

Activity: 117

Merit: 10

Quote from: reflexmk on May 28, 2014, 06:01:50 PM

Quote from: reflexmk on May 28, 2014, 05:31:18 PM

Does the binary include the fix needed to mine with NiceHash.com? Is the idlebug fixed? Thanks

bump

You mean sick extended time? Yes, sick time is extended.

Quote from: ellave on May 28, 2014, 08:37:49 PM

Quote from: ellave on May 28, 2014, 08:16:36 PM

This showing improvements for X13? What you guys getting with a 280x?

To answer my own question I went from 1.45 to 1.87

Check your configuration. I got 2.7 with R9280X-DC2T-3GD5 here: https://bitcointalksearch.org/topic/m.6990258

ellave

sr. member

Activity: 434

Merit: 250

Quote from: ellave on May 28, 2014, 08:16:36 PM

This showing improvements for X13? What you guys getting with a 280x?

To answer my own question I went from 1.45 to 1.87

CryptoSEO

full member

Activity: 182

Merit: 100

went from 8.8 to 13.48 using 4 - 280x and x11 mod

less power efficient but Shocked

the hash increase is simply a thing of beauty!

ellave

sr. member

Activity: 434

Merit: 250

This showing improvements for X13? What you guys getting with a 280x?

RouletteRun

sr. member

Activity: 451

Merit: 250

Quote from: hero18688 on May 28, 2014, 07:53:34 PM

Quote from: RouletteRun on May 28, 2014, 07:25:11 PM

Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards.

Sapphire toxic or dual-x 280x?
Posted from Bitcointa.lk - #tqnIhAEPzH52fsKM

Neither, MSi 280x Gaming, six PowerColor 270x Devil, one Sapphire 270x Dual X

hero18688

sr. member

Activity: 392

Merit: 250

Quote from: RouletteRun on May 28, 2014, 07:25:11 PM

Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards.

Sapphire toxic or dual-x 280x?
Posted from Bitcointa.lk - #tqnIhAEPzH52fsKM

RouletteRun

sr. member

Activity: 451

Merit: 250

Quote from: SavageWS6 on May 27, 2014, 10:10:50 PM

Hey lads, running sgminer x11mod b2 build that was posted like on page 11 or 12? I don't recall

I restarted my sgminer so I don't got like a screen shot to show, but here is my config

1x Sapphire 280X @ 1.175V - 1160/1500 3x Sapphire 270 @ 1.175,1.175,1.188
280X - 3.348 MH/s
270 - Each @ 2.030-2.036MH/s
Total avg is about 9.449 MH/s when I saw it before I closed it out. I've tested these settings and these numbers work the best for me

Windows 8.1
13.12 Official Drivers
DRK fund in config

Code:

{
"pools" : 
[
	{
	"url" :  "stratum+tcp://x11p2p.com:7903",
	"user" : "XcqqsoYHxgF1j9zgaVQsJFd53YBLMR3Rsd",
	"pass" : ""
	}
]
,
"device" : "0,1,2,3",
"intensity" : "20,17,17,17",
"lookup-gap" : "2",
"vectors" : "1,1,1,1",
"thread-concurrency" : "8193,6401,6401,6401", 
"gpu-threads" : "2",
"worksize" : "256,128,128,128",
"expiry" : "1",
"queue" : "0",
"gpu-powertune" : "20,20,20,20",
"gpu-engine" : "1160,1110,1110,1110",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-fan" : "80,65,65,65",
"kernel" : "x11mod",
"scan-time" : "1"
}

**Testing new clock speeds on 280X right now, above is good settings.

** When I'm mining on this config and WU/m I get, pool usually reports between 9.4MH/s - 10.7MH/s

Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards.

Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 53. (Read 351555 times)