any help runing this with defult bamt commands?
mine start etc....
i instaled it but have to start manully and i want to run it but defult mine commands any help?
Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 72. (Read 351531 times)
May 26, 2014, 04:06:54 AM
May 26, 2014, 04:00:27 AM
this miner works....in a funky way.
2 of my near-identical rigs now are different from each other. 1 can pull more than the other..
the only difference is the cpu. 1 with sempron, 1 with fx4130. The one with 4130 is ~1.5 mh/s faster.
2 of my near-identical rigs now are different from each other. 1 can pull more than the other..
the only difference is the cpu. 1 with sempron, 1 with fx4130. The one with 4130 is ~1.5 mh/s faster.
May 26, 2014, 03:47:46 AM
Getting SICK card warnings pretty easy (about 60 minutes) on my TRI-X OC R9 290X cards.
Heat/ventilation not an issue.
Anyway you can back up the SICK warning to 120 seconds instead of 60?
This is with gpu-threads 1, I am experimenting with threads 2 right now.
Heat/ventilation not an issue.
Anyway you can back up the SICK warning to 120 seconds instead of 60?
This is with gpu-threads 1, I am experimenting with threads 2 right now.
May 26, 2014, 03:33:08 AM
1056Mh/s on HD7700. GPU=1200MHz, MEM=1425MHz, I=17, w=128
With sph-sgminer only 782Mh/s
With sph-sgminer only 782Mh/s
May 26, 2014, 03:21:19 AM
--kernel x11mod -d 1 -w 64 -I 15 --thread-concurrency 6144 --gpu-threads 4 --gpu-engine 1100 --gpu-memclock 1250
yields 1.7MH on the one you can't go over I 15 and only 633khs on the new one, can get up to 800khs if I = 19
I've tried running with or without other cards enabled and the same batch file yields those different results
Please try --gpu-threads 1 or 2, -w 128 --thread-concurrency 8192 for old card (58xx, 68xx, 78xx). yields 1.7MH on the one you can't go over I 15 and only 633khs on the new one, can get up to 800khs if I = 19
I've tried running with or without other cards enabled and the same batch file yields those different results
May 26, 2014, 03:14:24 AM
--kernel x11mod -d 1 -w 64 -I 15 --thread-concurrency 6144 --gpu-threads 4 --gpu-engine 1100 --gpu-memclock 1250
yields 1.7MH on the one you can't go over I 15 and only 633khs on the new one, can get up to 800khs if I = 19
I've tried running with or without other cards enabled and the same batch file yields those different results
yields 1.7MH on the one you can't go over I 15 and only 633khs on the new one, can get up to 800khs if I = 19
I've tried running with or without other cards enabled and the same batch file yields those different results
May 26, 2014, 03:12:08 AM
Using newest windows binary my 290 is way better but my 7850 in the same machine is less than half the speed, 290 was 2.76 and 7850 was 1.70 now 290 is 3.69 and 7850 is 633khs
Please show me your settings May 26, 2014, 02:32:48 AM
Alright, please test this version for the intensity fix https://www.dropbox.com/s/skv74wv378h5qnl/sgminerx11.rar. Thanks to leasybear for pointing out where the problem was, then I went to the 2% miner and looked up some values he was using and incorporated those in the miner, again, thanks to lasybear.
This still seems to be crashing my driver instantly on my R9 290s. The 2% one has never crashed the display driver with the same config so idk what's the reason.
May 26, 2014, 02:27:21 AM
Using newest windows binary my 290 is way better but my 7850 in the same machine is less than half the speed, 290 was 2.76 and 7850 was 1.70 now 290 is 3.69 and 7850 is 633khs
May 26, 2014, 02:25:57 AM
I don't think my gpu ( 290) can do 4.0 MH/s. I think 290x only can do 4.0 Mh/s. 
290x is not worth it in general, too expensive and low increase in hash
May 26, 2014, 02:02:45 AM
which amd driver do the 290 owners use?
May 26, 2014, 01:07:49 AM
I don't think my gpu ( 290) can do 4.0 MH/s. I think 290x only can do 4.0 Mh/s.
You can try The Stilt bios https://litecointalk.org/index.php?topic=12830.0 and https://litecointalk.org/index.php?topic=12830.msg121827#msg121827does it work with non ref board or not?
May 26, 2014, 01:05:51 AM
I haven't mined any x11 yet, but with the hash you guys are getting it might be worth looking at.
May 26, 2014, 12:54:14 AM
I don't think my gpu ( 290) can do 4.0 MH/s. I think 290x only can do 4.0 Mh/s.
You can try The Stilt bios https://litecointalk.org/index.php?topic=12830.0 and https://litecointalk.org/index.php?topic=12830.msg121827#msg121827 May 26, 2014, 12:09:38 AM
I don't think my gpu ( 290) can do 4.0 MH/s. I think 290x only can do 4.0 Mh/s.
May 25, 2014, 11:47:54 PM
2 x 290x
Code:
"intensity" : "19,19",
"xintensity" : "0,0",
"rawintensity" : "0,0",
"worksize" : "128,128",
"kernel" : "x11mod,x11mod",
"lookup-gap" : "2,2",
"thread-concurrency" : "14080,14080",
"shaders" : "0,0",
"gpu-threads" : "1,1",
"gpu-engine" : "1050-1050,1050-1050",
"gpu-fan" : "100-100,100-100",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "20,20",
May 25, 2014, 11:19:50 PM
R9 290X overclocked to 1050/1500.
Code:
"scrypt" : true,
"shaders" : "2816",
"kernel" : "x11mod",
"failover-only" : true,
"intensity" : "19",
"vectors" : "1",
"worksize" : "128",
"lookup-gap" : "2",
"thread-concurrency" : "14080",
"gpu-engine" : "1050",
"gpu-fan" : "65-100",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0",
"temp-cutoff" : "96",
"temp-overheat" : "95",
"temp-target" : "88",
"auto-fan" : true,
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",
"shares" : "0",
"no-restart" : true,
"failover-switch-delay" : "30"
May 25, 2014, 11:05:47 PM
Can you 290x guys please share your config settings.
May 25, 2014, 11:01:47 PM
Changes was commited.
Check for github updates.
Check for github updates.
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 25, 2014, 10:50:05 PM
Alright, now on the the other aesthetical problems such as wrong best share and wrong difficulty being displayed. In the meantime, here is my DRK addy XrVcX5LEiUVxWRTBMbomopJkfHc3uGDQHe 
But I will wait for lasybear to push his changes to main.
But I will wait for lasybear to push his changes to main.
Tip sent, you should add your addy to your signature, or it might get lost in this thread
. Thanks. Jump to: