[ANN][XMR] monero.crypto-pool.fr | Large Monero Mining Pool - page 18.

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: gegstore on September 20, 2016, 10:35:43 AM

this pool support wolf xmr miner???

Yes of course !
Moreover, Wolf worked with us on the pool code.

Quote from: PantminerS7 on September 20, 2016, 02:02:04 PM

Quote from: superresistant on September 19, 2016, 04:38:21 PM

[XMR] Tutorial: How to compile your mining software on Linux ?
https://bitcointalksearch.org/topic/xmr-tutorial-how-to-compile-your-mining-software-on-linux-1614177

Thanks. Got it up and running after some major headache with CUDA itself.
The sad part is that my wifi doesn't want to cooperate and cuts the network connection more or less as soon as I start up ccminer. I don't have this problem on windows, so I guess that's going to be a fun few hours for me looking into. Back to windows for now again it is.

This is what I do when wifi is unstable on Linux :

Code:

sudo iwconfig wlan0 rts 1
sudo iwconfig wlan0 frag 256
sudo ifconfig wlan0 mtu 512
sudo iwconfig wlan0 retry 30
sudo iwconfig wlan0 rate 2M

The rate command is not always supported but the rest should do the trick. You have to type this command every time you boot or setup a bash script to launch at startup.

Also check your router : setup a fixed IP + fixed canal + long only mode + b/g mode only

If it still doesn't work, use your phone as a USB wifi adapter. Sometimes phones are more stable than the wifi card in the computer.

PantminerS7

full member

Activity: 165

Merit: 100

Quote from: superresistant on September 19, 2016, 04:38:21 PM

[XMR] Tutorial: How to compile your mining software on Linux ?
https://bitcointalksearch.org/topic/xmr-tutorial-how-to-compile-your-mining-software-on-linux-1614177

Thanks. Got it up and running after some major headache with CUDA itself.

The sad part is that my wifi doesn't want to cooperate and cuts the network connection more or less as soon as I start up ccminer. I don't have this problem on windows, so I guess that's going to be a fun few hours for me looking into. Back to windows for now again it is.

gegstore

member

Activity: 78

Merit: 10

this pool support wolf xmr miner???

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: PantminerS7 on September 19, 2016, 08:03:56 AM

Does anyone here run an Nvidia card on any Linux system? I tried and failed a lot with ubuntu, but when I finally got a miner compiled, my CUDA-driver wasn't working entirely right. If anyone has a retard-proof guide for installing CUDA/miner setup in general, I'd love to see some links!

[XMR] Tutorial: How to compile your mining software on Linux ?
https://bitcointalksearch.org/topic/xmr-tutorial-how-to-compile-your-mining-software-on-linux-1614177

Quote from: zebulon303 on September 19, 2016, 08:59:43 AM

Is there anything that has to be ajusted with our miners ?

No.

Quote from: zebulon303 on September 19, 2016, 08:59:43 AM

Is https://github.com/perl5577/cpuminer-multi still the way to go ?

Yes for CPU.

zebulon303

newbie

Activity: 12

Merit: 0

Hi everyone,

I have seen that a hardfork is scheduled on September 21st.

Is there anything that has to be ajusted with our miners ?

Is https://github.com/perl5577/cpuminer-multi still the way to go ?

Thanks

PantminerS7

full member

Activity: 165

Merit: 100

Just started mining in this pool. Guess the primary benefit is keeping me away from the computer, but I'm halfway to a payout now.

Hopefully, I'll be able to get an actual rig with several cards running at some point in the future. Fow now, I'm running a single Nividia (PNY) GTX 750ti with ~250 H/s. Right now, I'm running it through windows with ccminer.

Does anyone here run an Nvidia card on any Linux system? I tried and failed a lot with ubuntu, but when I finally got a miner compiled, my CUDA-driver wasn't working entirely right. If anyone has a retard-proof guide for installing CUDA/miner setup in general, I'd love to see some links!

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: Hueristic on September 17, 2016, 08:34:15 PM

SHIT SHIT SHIT!!~! i THOGUTH iT WAS GOOD FINALLY with the 9999 port but i'm banned again. Sad

Please PM your IP (the one used for mining).
Thanks.

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

SHIT SHIT SHIT!!~! i THOGUTH iT WAS GOOD FINALLY with the 9999 port but i'm banned again. Sad

Code:

C:\Coins and pools\monero\Claymore CryptoNote GPU Miner\Claymore CryptoNote GPU
Miner v9.5 Beta - POOL>NsGpuCNMiner.exe -o stratum+tcp://xmr.crypto-pool.fr:9999
 -u 44VYnAXVVH2bRvpC2vSYuZPpdXUpsVyc8WkSymZuPQNKSD3485C8PKPGPMbT53mRNBS7y2q9FkQC
S1N1zmt5YLWMQ8es9gH -p x
Main pool is xmr.crypto-pool.fr

╔════════════════════════════════════════════════════════════════╗
║            [b]Claymore CryptoNote GPU Miner  v9.5 Beta[/b]            ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 1
GPU #0: name: Tahiti, 3072 MB available, 28 units
Total cards: 1

Catalyst 15.x is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0: HashCnt = 896
POOL version
GPU #0: -a 4 mode selected
3 pools specified.
Press "m" key for tune mode.
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 9999
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 9999
Stratum - Connected
Stratum - Connected
Pool Diff 50000.2
DevFee: Pool Diff 50000.2
09/17/16-21:19:56 - New job received from xmr.crypto-pool.fr:9999
Speed: 342 h/s, TotalHashes: 2K, DevHashes: 0K Mining time: 00:00
09/17/16-21:20:15 - New job received from xmr.crypto-pool.fr:9999
Speed: 389 h/s, TotalHashes: 10K, DevHashes: 0K Mining time: 00:00
09/17/16-21:21:35 - New job received from xmr.crypto-pool.fr:9999
Speed: 401 h/s, TotalHashes: 42K, DevHashes: 0K Mining time: 00:01
09/17/16-21:21:55 - New job received from xmr.crypto-pool.fr:9999
Speed: 399 h/s, TotalHashes: 49K, DevHashes: 0K Mining time: 00:02
09/17/16-21:22:05 - New job received from xmr.crypto-pool.fr:9999
Speed: 400 h/s, TotalHashes: 53K, DevHashes: 0K Mining time: 00:02
09/17/16-21:25:15 - New job received from xmr.crypto-pool.fr:9999
Speed: 399 h/s, TotalHashes: 128K, DevHashes: 2K Mining time: 00:05
09/17/16-21:26:53 - New job received from xmr.crypto-pool.fr:9999
Speed: 398 h/s, TotalHashes: 166K, DevHashes: 3K Mining time: 00:07
09/17/16-21:27:30 - New job received from xmr.crypto-pool.fr:9999
Speed: 398 h/s, TotalHashes: 180K, DevHashes: 3K Mining time: 00:07
09/17/16-21:27:42 - SHARE FOUND (target 50000) - (GPU 0 of 1)
09/17/16-21:31:39 - SHARE FOUND (target 50000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"yourIPisbanned"}}
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 9999
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"yourIPisbanned"}}
Job timeout, disconnect, retry in 20 sec...

There is absolutely no overclock and this card has never been overclocked and I have never had an issue mining with it and it works fine on the failover pool.

gegstore

member

Activity: 78

Merit: 10

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: Termie on September 15, 2016, 04:03:35 AM

I tried port 9999, but I also get much too much "lowdifshares" until pool disconnect.
Isn´t 50000 high enough for 1x R9 290x + 3x R9 Nano?

Those are 2 different problems. Using a high diff solve the baning problem.
If you have lowdiffshares, try a lower diff.

Monero mining will always have warning messages from time to time. It is the same for everyone, you just want to find the best settings to have very few errors.

Termie

sr. member

Activity: 642

Merit: 292

I tried port 9999, but I also get much too much "lowdifshares" until pool disconnect.
Isn´t 50000 high enough for 1x R9 290x + 3x R9 Nano?

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: Hueristic on September 14, 2016, 11:01:33 PM

So 9.5 broke too? Or should I upgrade from 9.1?

Ok I get the problem. There are too many connections and shares sent at once.
Please use port 9999. The diff is higher and you'll send less shares but bigger ones.

9.5 is working better. You should upgrade.

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: superresistant on September 14, 2016, 03:52:17 PM

Quote from: gegstore on September 14, 2016, 01:55:26 PM

09/14/16-20:52:15 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:52:54 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:53:20 - SHARE FOUND (target 25000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 8888
Stratum - Connected
Pool Diff 25000.1
09/14/16-20:53:44 - SHARE FOUND (target 25000) - (GPU 0 of 1)
i too have this problem
what appen??

Strange, let us have a look.

Code:

C:\Coins and pools\monero\One Click Monero Miner AMD version\GPU_Miner>GpuM
exe -u 44VYnAXVVH2bRvpC2vSYuZPpdXUpsVyc8WkSymZuPQNKSD3485C8PKPGPMbT53mRNBS7
kQCS1N1zmt5YLWMQ8es9gH -a cryptonight -o stratum+tcp://xmr.crypto-pool.fr:3
p x -t 4
Main pool is xmr.crypto-pool.fr

╔════════════════════════════════════════════════════════════════╗
║            Claymore CryptoNote GPU Miner  v9.1 Beta            ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 1
GPU #0: name: Tahiti, 3072 MB available, 28 units
Total cards: 1

Catalyst 13.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0: HashCnt = 896
POOL version
GPU #0: -a 4 mode selected
1 pool specified.
Press "m" key for tune mode.
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 3333
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.142> port 3333
Stratum - Connected
Stratum - Connected
Pool Diff 12000
DevFee: Pool Diff 50000.2
09/14/16-23:59:28 - SHARE FOUND (target 12000) - (GPU 0 of 1)
09/14/16-23:59:32 - SHARE FOUND (target 12000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"yourIPisbanned"}}
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.142> port 3333
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"yourIPisbanned"}}

So 9.5 broke too? Or should I upgrade from 9.1?

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: gegstore on September 14, 2016, 01:55:26 PM

09/14/16-20:52:15 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:52:54 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:53:20 - SHARE FOUND (target 25000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 8888
Stratum - Connected
Pool Diff 25000.1
09/14/16-20:53:44 - SHARE FOUND (target 25000) - (GPU 0 of 1)
i too have this problem
what appen??

Strange, let us have a look.

gegstore

member

Activity: 78

Merit: 10

09/14/16-20:52:15 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:52:54 - SHARE FOUND (target 25000) - (GPU 0 of 1)
09/14/16-20:53:20 - SHARE FOUND (target 25000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.58.186> port 8888
Stratum - Connected
Pool Diff 25000.1
09/14/16-20:53:44 - SHARE FOUND (target 25000) - (GPU 0 of 1)

i too have this problem

what appen??

gegstore

member

Activity: 78

Merit: 10

i have more share lost on the port 8888

gegstore

member

Activity: 78

Merit: 10

Quote from: superresistant on September 14, 2016, 10:56:35 AM

Quote from: gegstore on September 14, 2016, 08:07:46 AM

because you use the 9.1 version, download the latest 9.5 and then you have a answer

Thanks gegstore.

of nothing superresistant

superresistant

legendary

Activity: 2156

Merit: 1131

Quote from: gegstore on September 14, 2016, 08:07:46 AM

because you use the 9.1 version, download the latest 9.5 and then you have a answer

Thanks gegstore.

------

Also, for those using the NVIDIA ccminer, this developer is working on updating the old code : https://github.com/KlausT/ccminer-cryptonight

And here is the new tutorial on how to compile on Linux :
https://bitcointalksearch.org/topic/xmr-tutorial-how-to-compile-your-mining-software-on-linux-1614177

gegstore

member

Activity: 78

Merit: 10

gegstore

member

Activity: 78

Merit: 10

have you problem with calc hashrate? Huh

Topic: [ANN][XMR] monero.crypto-pool.fr | Large Monero Mining Pool - page 18. (Read 126486 times)