Topic: [ANN][XMY] Myriad | Multi-Algo, Fair, Secure - page 335. (Read 849919 times)
good
mining there too, well id take their word for our shares are safe. my miner is saying accepted shares but doesnt reflect at the pool so i guess its on their end but im gambling they are telling the truth that they are safe
I'm new to the thread. Just perusing some of the pages it seems like the developer isnt active and there a few issues with this coin. Could someone give me a brief update?
The dice games are back, and now they are provably fair:
Rules:
You must use a wallet that you control (you may not be in control of the sending address of a mining or trading account). Bets that are over the max bet will be returned minus a transaction fee (0.0005 MYR). Bets that are under the min bet will be kept and considered a donation. Game is played after one confirmation. Losers should receive 0.0001 MYR dust back to confirm game has been played.
Games are beta. If it eats your coins please PM me and I will recover them (I'll need the txid and will have to verify in the blockchain). Games may end at any time, check back here for status.
Addresses, results and proof can be viewed here:
http://cryptap.us/myr/dice/
As this is a beta, I am paying a 500 MYR bounty (in addition to any coins lost) for any flaws that can be found in the game or transactions. It must be a unique flaw, I will payout once per flaw to an individual. It must be proven in the blockchain. PM me if you find one.
Feedback is welcome.
Rules:
You must use a wallet that you control (you may not be in control of the sending address of a mining or trading account). Bets that are over the max bet will be returned minus a transaction fee (0.0005 MYR). Bets that are under the min bet will be kept and considered a donation. Game is played after one confirmation. Losers should receive 0.0001 MYR dust back to confirm game has been played.
Games are beta. If it eats your coins please PM me and I will recover them (I'll need the txid and will have to verify in the blockchain). Games may end at any time, check back here for status.
Addresses, results and proof can be viewed here:
http://cryptap.us/myr/dice/
As this is a beta, I am paying a 500 MYR bounty (in addition to any coins lost) for any flaws that can be found in the game or transactions. It must be a unique flaw, I will payout once per flaw to an individual. It must be proven in the blockchain. PM me if you find one.
Feedback is welcome.
Edit:
increased bounty for flaws
increased max bets again
will now return bets too large, keep bets too small
multiple vouts should work, no limitation anymore
addresses for dice games are now on the dice site: http://cryptap.us/myr/dice/
raised bounty for flaws yet again
anyone know what is up with nut2pools skein pool? stopped getting shares and the site says We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP. which generally means I am getting screwed.
Same here, what's up with that??
anyone know what is up with nut2pools skein pool? stopped getting shares and the site says We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP. which generally means I am getting screwed.
I got 791 myriadcoins mining it, so it should be working, but idk if any are missing damn i feel like im the only one on skein :/
I'm the other guy mining skeinwe just like doubled its difficulty almost
what cards you runin?
I only got 220Mh/s
wow my 280x runs 230 on skien lol....
if I go over a certain amount the power company charges me $0.35/kilowatt hour
my .bin file is named skeinHawaiigv1w256l4, and I am running it with I -14
anything I could do to boost my skein mining?
Memclock as it was said is not necessary. I helped with configuring a 290s, the result was between 240-260 depending on the card, I can safely say 240mh is a benchmark for 290s. Memclock set it to 1000, use gpu thread 2, and play with the TC ( 16000k , 18000k) , intensity is not needed on skein , maximum i=8, the most important is engine clock, put it as high as you find it stable and reliable depending on how comfortable you are with OC, minimum 1030, try 1050,1080, maybe 1100 if you want to try it out.
My mem clock goes all the way down to 300 according to Msi ab when mining. About tc, wharlt are the usual TC candidates? Mine was 24550 on scrypt, dunno what it wiol be here in skein
Can you post your cgminer config file?
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --skein -o stratum+tcp://myrskeu.nut2pools.com:6040 -u xxx -p xxx -I 10
what algorithm and settings should be used for R9 280x cards? I am getting about 650 KH/s and 7-15 "WU" with my default settings with "skein", am I doing it wrong?
anyone know what is up with nut2pools skein pool? stopped getting shares and the site says We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP. which generally means I am getting screwed.
we need to rocket back up, price too low atm and a little bit fewer volume than usual
Hey guys,
United-Miners is open for SHA-256!
http://myr.united-miners.com - has the usual pool features:
Stratum with VARDIFF - adjusts automatically to your hashing speed for optimal results
1 % FEE - small fee to ensure pool stays alive - we have very extensive hardware to ensure no downtime
Idle Worker Notifications - you will be mailed when a worker goes idle
SSL protected
DDoS Protected
New Website UI!!
Any questions please ask.
United-Miners is open for SHA-256!
http://myr.united-miners.com - has the usual pool features:
Stratum with VARDIFF - adjusts automatically to your hashing speed for optimal results
1 % FEE - small fee to ensure pool stays alive - we have very extensive hardware to ensure no downtime
Idle Worker Notifications - you will be mailed when a worker goes idle
SSL protected
DDoS Protected
New Website UI!!
Any questions please ask.
damn i feel like im the only one on skein :/
I'm the other guy mining skeinwe just like doubled its difficulty almost
what cards you runin?
I only got 220Mh/s
wow my 280x runs 230 on skien lol....
if I go over a certain amount the power company charges me $0.35/kilowatt hour
my .bin file is named skeinHawaiigv1w256l4, and I am running it with I -14
anything I could do to boost my skein mining?
Memclock as it was said is not necessary. I helped with configuring a 290s, the result was between 240-260 depending on the card, I can safely say 240mh is a benchmark for 290s. Memclock set it to 1000, use gpu thread 2, and play with the TC ( 16000k , 18000k) , intensity is not needed on skein , maximum i=8, the most important is engine clock, put it as high as you find it stable and reliable depending on how comfortable you are with OC, minimum 1030, try 1050,1080, maybe 1100 if you want to try it out.
My mem clock goes all the way down to 300 according to Msi ab when mining. About tc, wharlt are the usual TC candidates? Mine was 24550 on scrypt, dunno what it wiol be here in skein
Can you post your cgminer config file?
Memory clock 900Mhz
Wut? 900mhz?
damn you two bunch of lucky bas... I can't get my 280x lower as 900Mhz
I can't get my 280x lower as 900Mhz
yeah pretty sure cgminer resets it to 150 when not using the computer (just mining), checked it a lot of times with cgminer and other monitoring stuff.
bumps back up to 1250 when i use it for watching videos and other stuff, this algo is so light i can even play games, although hashrate reduces by about 25% when i play games
well i got up to 240 but thats with 1050 engine and its about 50 engine for 10mhash, dont think it is worthit to push more
bumps back up to 1250 when i use it for watching videos and other stuff, this algo is so light i can even play games, although hashrate reduces by about 25% when i play games
well i got up to 240 but thats with 1050 engine and its about 50 engine for 10mhash, dont think it is worthit to push more
damn i feel like im the only one on skein :/
I'm the other guy mining skeinwe just like doubled its difficulty almost
what cards you runin?
I only got 220Mh/s
wow my 280x runs 230 on skien lol....
if I go over a certain amount the power company charges me $0.35/kilowatt hour
my .bin file is named skeinHawaiigv1w256l4, and I am running it with I -14
anything I could do to boost my skein mining?
Memclock as it was said is not necessary. I helped with configuring a 290s, the result was between 240-260 depending on the card, I can safely say 240mh is a benchmark for 290s. Memclock set it to 1000, use gpu thread 2, and play with the TC ( 16000k , 18000k) , intensity is not needed on skein , maximum i=8, the most important is engine clock, put it as high as you find it stable and reliable depending on how comfortable you are with OC, minimum 1030, try 1050,1080, maybe 1100 if you want to try it out.
My mem clock goes all the way down to 300 according to Msi ab when mining. About tc, wharlt are the usual TC candidates? Mine was 24550 on scrypt, dunno what it wiol be here in skein
ATTENTION EVERYBODY! We were discussing with some of the active members from IRC channel #myriadcoin that we definetely need to register the channel on freenode, so it can be moderated and taking care of, topic setting, etc. Seeing how there are 80% offline people, and you need to be an operator to register, it is impossible in the current state to register it, everybody needs to leave, so a few of the regulars agreed to register the channel: ##myriadcoin (2 x ##). I registered this channel in the idea for people to join here for chat, so everybody can leave the unregistered #myriadcoin channel and developer or somebody that is involved in the project can register it. If the dev and the community agree that they want to make ##myriadcoin the official channel of the coin, I am happy to give the "founder" flag to the developer or to somebody with trust in the community like foodies123 (creator of blockchain explorer), so they can take over, and I can glady drop my founder status without any problems if this is the case. If somehow you manage to get everybody out from #myriadcoin and register the channel, I will drop the newly created ##myriadcoin (by unregistering it)
damn i feel like im the only one on skein :/
I'm the other guy mining skeinwe just like doubled its difficulty almost
what cards you runin?
I only got 220Mh/s
wow my 280x runs 230 on skien lol....
if I go over a certain amount the power company charges me $0.35/kilowatt hour
my .bin file is named skeinHawaiigv1w256l4, and I am running it with I -14
anything I could do to boost my skein mining?
Memclock as it was said is not necessary. I helped with configuring a 290s, the result was between 240-260 depending on the card, I can safely say 240mh is a benchmark for 290s. Memclock set it to 1000, use gpu thread 2, and play with the TC ( 16000k , 18000k) , intensity is not needed on skein , maximum i=8, the most important is engine clock, put it as high as you find it stable and reliable depending on how comfortable you are with OC, minimum 1030, try 1050,1080, maybe 1100 if you want to try it out.
My mem clock goes all the way down to 300 according to Msi ab when mining. About tc, wharlt are the usual TC candidates? Mine was 24550 on scrypt, dunno what it wiol be here in skein
Something cosmic will happen soon 
Should I prepare teleportation for Orion?
Jump to: