the number of petitions exceeded 400. The next step is 500
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 123. (Read 125911 times)
If someone with a multimeter can verify this for me: what's the original r80 value? I need to undo my hardware mod properly to define a good voltage range 
I'm waiting a miracle from you. 
Thank you!
Thank you!
a small update on some questions I got:
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
Man if you could help us with a mod firmware I think all of us will be glad to pay you for your work or even if you include a fee in the firmware as the ewbf all will support that.
This is amazing that you doing those modes and sharing with community.
Im sure we all will donate or pay for your modes once done and tested.
Where do you base blissz? If UK I can give u one of my D3 first batch for testing.
PM me if interested
Im sure we all will donate or pay for your modes once done and tested.
Where do you base blissz? If UK I can give u one of my D3 first batch for testing.
PM me if interested
a small update on some questions I got:
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
Actually My curiosity is ,can be added more algo to D3
This is great project, thanks for doing this.
Let us know, if there is something we can help you with.
Let us know, if there is something we can help you with.
a small update on some questions I got:
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
Anyone think the firmware could be modded so that the D3 could mine Scrypt??!
That would be awesome!
That would be awesome!
No
Anyone think the firmware could be modded so that the D3 could mine Scrypt??!
That would be awesome!
That would be awesome!
I have some great news guys! 
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
Is a GREAT job!I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
Only an information.... you test this firmware only with D3 19.5 GH/s or you test also with the first batch 17.5 GH/s?
Thank you very much for your job!
My 50 D3s would really like a nice upgrade.
I have some great news guys!
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
This looks freaking awesome, I am excited to the possibilities this will open for all, something maybe to look at if possible it the fans spinning up to 100% when the miner loses connection with the pool or when the internet drops out. The kernel log reads: local0.err cgminer[374]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!. This is probably the most annoying thing ever seeing as the fans a really loud at 6000RPM. I basically shit myself every time this happens seeing as I don't expect it.
I kinda like the fan revs since I run a pool. Give be a heads up something happened
I have some great news guys!
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
This looks freaking awesome, I am excited to the possibilities this will open for all, something maybe to look at if possible it the fans spinning up to 100% when the miner loses connection with the pool or when the internet drops out. The kernel log reads: local0.err cgminer[374]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!. This is probably the most annoying thing ever seeing as the fans a really loud at 6000RPM. I basically shit myself every time this happens seeing as I don't expect it.
wow this will be AMAZING!!! and this community needs it, considering....................
Such a firmware update can sell thousands .
Wow it be really insane if some1 makes ALgo switch possible ! Im willing to donate n test firmware !
I believe , Bitmain can solve this situation if desired.
But I dont believe that they will do
If they dont , I Hope someone will try this.
already 264 people are expecting it, maybe more than 1 million dollars investment
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
But I dont believe that they will do
If they dont , I Hope someone will try this.
already 264 people are expecting it, maybe more than 1 million dollars investment
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
maybe blissz work for bitmain and is trying to fix the whole mess bitmain cause to the consumers...
exactly: it will be enabled by flashing the firmware and I will add the options to the existing web interface
thats awesome. think you could add the options to allow --balance and --load-balance to the miner config?
Cheers
Jump to: