regarding voltage did you tune using some custom parameters into /config/cgminer.conf
because editing freq & other parameters worsk fine in this file.
Did you get the default voltage applied to asic ship?
The. We can modify with bitmain-voltage" : "xxxx"
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 121. (Read 125911 times)
Thank you - can ssh no problem. It is all downhill from here 
I hear great things about awesome miner.
Let me make this clear, changing to a different algorithm is NON-TRIVIAL, but doable.
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
try this to ssh into D3
http://www.awesomeminer.com/help/antminerapi.aspx
THEN SIMPLY
ssh [email protected]
'enter password'
I have some great news guys! 
I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
I want to download this quite software mod. we can pay many or dashcoin for this mod !how long we can to use it? I successfully modified the following:
- unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software
This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore.
- removed fast FAN startup. (very annoying for users that run this miner at home)
- unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well.
I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess
This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible
before you ask: Adding new algorithms will be on the list for future versions
other feature requests are welcome of course
Let me make this clear, changing to a different algorithm is NON-TRIVIAL, but doable.
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
Technicaly the best way for blissz is to have fee .selling it is only possible with server who can verify each serial with a valid number , in other way people will share it for free. Fee is the smart choice i think. I would have skill to help but i havent enough
@blissz check last topic to have default voltage , enjoy
@blissz check last topic to have default voltage , enjoy
Thanks for this. I will look into it. But with the
Recent rise in Dash and the new X11 ICOs, I think it might be best to keep the having power and make a sound proof box with ventilation.
Recent rise in Dash and the new X11 ICOs, I think it might be best to keep the having power and make a sound proof box with ventilation.
what are these new x11 ICO's of which you speak? mineable? (I need hope damn it!) (sorry...stressed)
Thanks for this. I will look into it. But with the
Recent rise in Dash and the new X11 ICOs, I think it might be best to keep the having power and make a sound proof box with ventilation.
Recent rise in Dash and the new X11 ICOs, I think it might be best to keep the having power and make a sound proof box with ventilation.
i can get a D3+PSU for 1575$US should i buy ?
i got mixed feelings , reading this thread.
i got mixed feelings , reading this thread.
at this very moment id say no, but if this works out........YES
a small update on some questions I got:
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
- overvolting & overclocking will be possible as well. This doesn't make sense for me, but as long as you can keep it cool enough, it will be fine.
- I will add more features to the webinterface after the first version
- for now it's only tested on the October batch, but it will work for sure on other batches as well.
The status is now is that the I can adjust the voltage by hard code it in the binary, but it really needs to be a proper setting in the advanced webinterface page first before I send it out.
Fan speeds are fully unlocked already, so you can also decide to change them to a pair of silent fans on the modded firmware.
where could we to download this mod
i can get a D3+PSU for 1575$US should i buy ?
i got mixed feelings , reading this thread.
i got mixed feelings , reading this thread.
I think the algo for mining is on PIC16F1704 not in firmware file ... anyone can read and post file of PIC16F1704 ? I think we need work on this ..
I would also be willing to pay good money for a firmware update that supports more algo's !!
Get this done and you will be a very rich man =)
Get this done and you will be a very rich man =)
i hear nodel coin is x11 coin and we can use d3 to mine it with profit of 10 dollar aday but i dont know how to do it
http://euneedlepool.hopto.me/index.php?page=login
I would also be willing to pay good money for a firmware update that supports more algo's !!
Get this done and you will be a very rich man =)
Get this done and you will be a very rich man =)
Dear BLISSZ
Thanks a lof of you work. All we are waiting new ALGO on D3. Have a good news about this project?
Thanks a lof of you work. All we are waiting new ALGO on D3. Have a good news about this project?
no one try to put the control board of l3 on D3
i mean if D3 can be process like L3 so we can implement asoftware to do mining using the D3 processing board for different algorithm
so we hack the firmware in both cases we will not loose anything for bitshit uselless unit i bought for 5000 $ 2 pcs 10000$
thx
i mean if D3 can be process like L3 so we can implement asoftware to do mining using the D3 processing board for different algorithm
so we hack the firmware in both cases we will not loose anything for bitshit uselless unit i bought for 5000 $ 2 pcs 10000$
thx
following
has i see no one try to help ... i just remove the warranty of my brand new D
don't know if it will be good for you , it seem to be at 9.50~ at startup and then 7.99~8.00 when mining
please let us have basic set up or how to do... to dont hear those damm fans ...
the r80 is very little , i m scared to touch it ...
don't know if it will be good for you , it seem to be at 9.50~ at startup and then 7.99~8.00 when mining
please let us have basic set up or how to do... to dont hear those damm fans ...
the r80 is very little , i m scared to touch it ...
following
Jump to: