Antminer D3 firmware testing - page 2.

d4nntheman

newbie

Activity: 8

Merit: 0

Quote from: PacoSS on December 17, 2017, 02:47:02 PM

Do it allow to change the original fans?

Cause I tried change them (Noctua nf-f12) and the machine didn't start at all :-(

I didnt like of the Blizz one that it disconnect from the pool i'm minning to make the dev job, and that's is heavy penaltied there.

Thanks.

Yes you can set the fan slope by increasing or decreasing the max fan temp and min fan temp
Edit I missed this as well sorry I'm at work and reading fast.
I'll add support for 0 rpm fans in the next release

Quote from: wolf_miner on December 17, 2017, 08:28:28 AM

Hi, is possible to pass the voltage settings using ssh commands instead of using web interface?

Cheers W_M

Kinda if you modify the file /config/cgminer.conf then restart cgminer you should be good

Quote from: Edrick123 on December 17, 2017, 06:35:41 AM

For the voltage can I do it for individual board with tons of hw? Or the voltage setting is for all 3 board?

Try all permutations of frequency and voltage

Edit I misread this. Yes I'm working on individual board voltage I just need some modivation to finish. No eta yet

PacoSS

newbie

Activity: 5

Merit: 0

Do it allow to change the original fans?

Cause I tried change them (Noctua nf-f12) and the machine didn't start at all :-(

I didnt like of the Blizz one that it disconnect from the pool i'm minning to make the dev job, and that's is heavy penaltied there.

Thanks.

ChilliWinter

full member

Activity: 141

Merit: 100

Quote from: Merlig on December 17, 2017, 06:26:51 AM

Quote from: ChilliWinter on December 17, 2017, 02:29:59 AM

you may try ssh it too
quick way to go in if you don't mind changing a lot Wink

which parameters I have to choose to login?
Port?

ssh is tcp 22
user: root
pass: admin

wolf_miner

legendary

Activity: 1018

Merit: 1001

Hi, is possible to pass the voltage settings using ssh commands instead of using web interface?

Cheers W_M

Edrick123

newbie

Activity: 18

Merit: 0

For the voltage can I do it for individual board with tons of hw? Or the voltage setting is for all 3 board?

Merlig

member

Activity: 143

Merit: 11

Quote from: ChilliWinter on December 17, 2017, 02:29:59 AM

you may try ssh it too
quick way to go in if you don't mind changing a lot Wink

which parameters I have to choose to login?
Port?

ChilliWinter

full member

Activity: 141

Merit: 100

you may try ssh it too
quick way to go in if you don't mind changing a lot Wink

colby_95

newbie

Activity: 18

Merit: 0

Is it possible to solo-mine to a wallet with this firmware or do you know of any way to do so with the D3? Thanks Huh

slv1221

newbie

Activity: 44

Merit: 0

Quote from: Dvun on December 16, 2017, 03:07:17 PM

Who can tell please, how i can open bitmain firmware and some change in there ?
Some script for ubuntu or what ? Help please

tar xvf to extract the tar
then use 7z to extract the .SD file
you should get a .cpio file use
cpio -idv < /tmp/object.cpio
to extract the cpio file
make sure you are root when you extract the cpio file

Dvun

newbie

Activity: 1

Merit: 0

Who can tell please, how i can open bitmain firmware and some change in there ?
Some script for ubuntu or what ? Help please

slv1221

newbie

Activity: 44

Merit: 0

A small instruction for restoring I \ O board
download this archive https://s3.cn-north-1.amazonaws.com.cn/shop-bitmain/download/Tools%20and%20Instructions%20to%20Image%20SD%20card.zip
write to the flash drive
take out the I \ O board from Antminer
insert a flash drive in I \ O board
close the 2 contacts with a screwdriver and hold, as shown in the picture

connect power
After the blue lights started flashing randomly, remove the screwdriver
look at the router of the IP address of our board
connect via browser
and load in the board native firmware
for L3 + https://s3.cn-north-1.amazonaws.com.cn/shop-bitmain/download/Antminer-L3%2B-201708251737-384M.tar.gz
for D3 https://s3.cn-north-1.amazonaws.com.cn/shop-file-server/firmwares/Antminer%20D3/Firmware/00720170915192904493x4FcBXYX06A9/Antminer-D3-201711201715-0M.tar.gz
after reboot, turn off the power and remove the flash drive
connect the power and check that the board receives an IP address and is accessible via the web

slv1221

newbie

Activity: 44

Merit: 0

I get a lot of errors when compiling an item from git
as soon as I compile everything without errors, I will immediately update FW

d4nntheman

newbie

Activity: 8

Merit: 0

okay rebuilt FW

now with more voltage options
fan control options as well
updated some parts of cgminer to 4.10

still may be beta ive been testing this release for a few mins. but im about to go drink so im done working on this for the day.
consider this release very unstable

~~https://drive.google.com/open?id=1xpC-QlHC__gx4_Me9a7xQYZufUSUISEG~~
https://drive.google.com/open?id=1CXjg2EoBcL6tzCFTIeSG8KMrHVXt5yav

EDIT:

and wow its very unstable

Edit 2

https://drive.google.com/open?id=1CXjg2EoBcL6tzCFTIeSG8KMrHVXt5yav

much more stable

slv1221

newbie

Activity: 44

Merit: 0

good job
i rebild and test it tomorrow

d4nntheman

newbie

Activity: 8

Merit: 0

Quote from: ChilliWinter on December 12, 2017, 02:17:22 PM

Sounds like nice work here guys without dev fees.
I'm looking you about cgminer 4.10.x soon
keep it up, it's funny

check out my GitHub I just attempted to rebase to 4.10
I still need to cherry pick some code that went missing from the rebase though.
feel free to submit a PR if anyone has some code they want added.

ChilliWinter

full member

Activity: 141

Merit: 100

Sounds like nice work here guys without dev fees.
I'm looking you about cgminer 4.10.x soon
keep it up, it's funny

slv1221

newbie

Activity: 44

Merit: 0

Hi all
test my firmware at the screen

756W from wall

slv1221

newbie

Activity: 44

Merit: 0

Antminer D3 firmware without dev fee
https://drive.google.com/open?id=1aSwb01sCWxN_mLjpZE_gpu8wJ0fmFMdh
after update reset settings to default for better mining )

Changes
Enabled changing voltage to the board via web interface
slowed the speed of the fan speed increase for more quite fans.

slv1221

newbie

Activity: 44

Merit: 0

hi
my firmware with d4nntheman cgminer 4.9
384/50

and powermetr

425/75

531/100

slv1221

newbie

Activity: 44

Merit: 0

Hi d4nntheman
your firmware not work
antminer not boot
plz compile cgminer 4.10 version and i compile new firmware.
at the moment I restore my antminer D3, plz remove your firmware from first post

Topic: Antminer D3 firmware testing - page 2. (Read 3323 times)