Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) - page 4.

gigidinizza

member

Activity: 187

Merit: 10

Hello, the result look great, there is not much info about the silent mode, I mean how silent is that ? anyone measured it and compared it ? Any impact on the hash rate ?
I'm talking about an apartment environment for exemple...

blissz

sr. member

Activity: 336

Merit: 258

Michi_A

newbie

Activity: 5

Merit: 0

Quote from: blissz on January 13, 2018, 04:11:34 AM

Quote from: Michi_A on January 13, 2018, 04:03:28 AM

Same here. Moreover the Miner Status page shows no entries.

can you make a screen shot?

http://i64.tinypic.com/2ir6vdj.jpg

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238776k/238776k available, 23368k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015438] pid_max: default: 32768 minimum: 301
[    0.015667] Security Framework initialized
[    0.015762] Mount-cache hash table entries: 512
[    0.024595] Initializing cgroup subsys cpuacct
[    0.024628] Initializing cgroup subsys memory
[    0.024693] Initializing cgroup subsys blkio
[    0.024829] CPU: Testing write buffer coherency: ok
[    0.025407] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025482] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026804] Brought up 1 CPUs
[    0.026827] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028119] devtmpfs: initialized
[    0.092469] pinctrl core: initialized pinctrl subsystem
[    0.092682] rstctl core: initialized rstctl subsystem
[    0.093176] regulator-dummy: no parameters
[    0.093739] NET: Registered protocol family 16
[    0.094441] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104111] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104293] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105376] platform 49000000.edma: alias fck already exists
[    0.105410] platform 49000000.edma: alias fck already exists
[    0.105437] platform 49000000.edma: alias fck already exists
[    0.106593] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106777] OMAP GPIO hardware version 0.1
[    0.108192] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109516] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110834] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111465] of_get_named_gpio_flags exited with status 52
[    0.111498] gpio-rctrl rstctl.3: loaded OK
[    0.116594] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119807] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.121996] cpsw.0: No hwaddr in dt. Using b0:d5:cc:ac:bf:36 from efuse
[    0.122028] cpsw.1: No hwaddr in dt. Using b0:d5:cc:ac:bf:38 from efuse
[    0.137596] bio: create slab  at 0
[    0.149730] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149973] of_get_named_gpio_flags: can't parse gpios property
[    0.150258] vmmcsd_fixed: 3300 mV 
[    0.153377] SCSI subsystem initialized
[    0.153827] usbcore: registered new interface driver usbfs
[    0.153941] usbcore: registered new interface driver hub
[    0.154282] usbcore: registered new device driver usb
[    0.156399] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156432] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156625] media: Linux media interface: v0.10
[    0.156719] Linux video capture interface: v2.00
[    0.156835] pps_core: LinuxPPS API ver. 1 registered
[    0.156851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.157572] Advanced Linux Sound Architecture Driver Initialized.
[    0.158755] Switching to clocksource gp_timer
[    0.176783] NET: Registered protocol family 2
[    0.177772] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177861] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177951] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178042] TCP: reno registered
[    0.178069] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178115] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178609] NET: Registered protocol family 1
[    0.179198] RPC: Registered named UNIX socket transport module.
[    0.179218] RPC: Registered udp transport module.
[    0.179231] RPC: Registered tcp transport module.
[    0.179245] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179632] Trying to unpack rootfs image as initramfs...
[    1.937204] Freeing initrd memory: 12140K
[    1.937893] CPU PMU: probing PMU on CPU 0
[    1.937928] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.938548] omap2_mbox_probe: platform not supported
[    1.942421] VFS: Disk quotas dquot_6.5.2
[    1.942660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.943967] NFS: Registering the id_resolver key type
[    1.944124] Key type id_resolver registered
[    1.944143] Key type id_legacy registered
[    1.944211] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.944651] msgmni has been set to 490
[    1.947452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.947478] io scheduler noop registered
[    1.947494] io scheduler deadline registered
[    1.947551] io scheduler cfq registered (default)
[    1.951494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.954104] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.954382] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.615278] console [ttyO0] enabled
[    2.619862] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.628506] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.637157] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.645820] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.654805] [drm] Initialized drm 1.1.0 20060810
[    2.673474] brd: module loaded
[    2.683730] loop: module loaded
[    2.687919] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.697853] nand_get_flash_type: 2c,da against 2c,da
[    2.703387] ONFI param page 0 valid
[    2.707060] ONFI flash detected
[    2.710382] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.722296] omap2-nand: detected x8 NAND flash
[    2.726961] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.732544] omap2-nand: using custom ecc layout
[    2.737391] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.743786] Creating 10 MTD partitions on "omap2-nand.0":
[    2.749464] 0x000000000000-0x000000020000 : "spl"
[    2.756244] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.763713] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.771126] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.778540] 0x000000080000-0x000000240000 : "u-boot"
[    2.786795] 0x000000240000-0x000000260000 : "bootenv"
[    2.793735] 0x000000260000-0x000000280000 : "fdt"
[    2.800358] 0x000000280000-0x000000780000 : "kernel"
[    2.811394] 0x000000800000-0x000001c00000 : "root"
[    2.834927] 0x000001c00000-0x000003000000 : "config"
[    2.858726] OneNAND driver initializing
[    2.864489] usbcore: registered new interface driver asix
[    2.870307] usbcore: registered new interface driver cdc_ether
[    2.876553] usbcore: registered new interface driver smsc95xx
[    2.882672] usbcore: registered new interface driver net1080
[    2.888698] usbcore: registered new interface driver cdc_subset
[    2.894995] usbcore: registered new interface driver zaurus
[    2.901004] usbcore: registered new interface driver cdc_ncm
[    2.907742] usbcore: registered new interface driver cdc_acm
[    2.913703] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.922084] Initializing USB Mass Storage driver...
[    2.927326] usbcore: registered new interface driver usb-storage
[    2.933628] USB Mass Storage support registered.
[    2.938672] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.945390] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.950634] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.959404] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.959427] musb-hdrc: MHDRC RTL version 2.0 
[    2.959442] musb-hdrc: setup fifo_mode 4
[    2.959470] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.959652] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.964691] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.970703] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.975951] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.984721] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.984742] musb-hdrc: MHDRC RTL version 2.0 
[    2.984756] musb-hdrc: setup fifo_mode 4
[    2.984778] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.984921] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.989965] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.995274] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.001897] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.010156] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.010260] usb usb1: default language 0x0409
[    3.010319] usb usb1: udev 1, busnum 1, minor = 0
[    3.010342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.017470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.025042] usb usb1: Product: MUSB HDRC host driver
[    3.030257] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.035925] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.041931] usb usb1: usb_probe_device
[    3.041959] usb usb1: configuration #1 chosen from 1 choice
[    3.042023] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.042224] hub 1-0:1.0: usb_probe_interface
[    3.042246] hub 1-0:1.0: usb_probe_interface - got id
[    3.042273] hub 1-0:1.0: USB hub found
[    3.046271] hub 1-0:1.0: 1 port detected
[    3.050409] hub 1-0:1.0: standalone hub
[    3.050429] hub 1-0:1.0: individual port power switching
[    3.050448] hub 1-0:1.0: no over-current protection
[    3.050465] hub 1-0:1.0: Single TT
[    3.050487] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.050506] hub 1-0:1.0: power on to power good time: 10ms
[    3.050561] hub 1-0:1.0: local power source is good
[    3.050674] hub 1-0:1.0: enabling power on all ports
[    3.051789] mousedev: PS/2 mouse device common for all mice
[    3.059739] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.067230] 44e3e000.rtc: already running
[    3.071735] i2c /dev entries driver
[    3.076745] pps_ldisc: PPS line discipline registered
[    3.082231] Driver for 1-wire Dallas network protocol.
[    3.089491] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.097054] cpuidle: using governor ladder
[    3.101381] cpuidle: using governor menu
[    3.105959] of_get_named_gpio_flags exited with status 6
[    3.105978] of_get_named_gpio_flags: can't parse gpios property
[    3.105994] of_get_named_gpio_flags: can't parse gpios property
[    3.106031] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.113253] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.120102] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.127320] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.134645] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.141630] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.151167] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.175080] of_get_named_gpio_flags exited with status -517
[    3.175146] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.182923] ledtrig-cpu: registered to indicate activity on CPUs
[    3.189695] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.196892] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.205057] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.211354] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.218536] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.230796] usbcore: registered new interface driver usbhid
[    3.236715] usbhid: USB HID core driver
[    3.243632] TCP: cubic registered
[    3.247157] Initializing XFRM netlink socket
[    3.251737] NET: Registered protocol family 17
[    3.256594] NET: Registered protocol family 15
[    3.261466] Key type dns_resolver registered
[    3.266115] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.274231] ThumbEE CPU extension supported.
[    3.278743] Registering SWP/SWPB emulation handler
[    3.284757] registered taskstats version 1
[    3.291381] of_get_named_gpio_flags exited with status -517
[    3.291456] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.348367] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.354782] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.369338] libphy: 4a101000.mdio: probed
[    3.373660] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.383897] Detected MACID = b0:d5:cc:ac:bf:36
[    3.388580] cpsw 4a100000.ethernet: NAPI disabled
[    3.393970] of_get_named_gpio_flags exited with status -517
[    3.394037] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.402766] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.412052] cpu0 supply cpu0 not found, using dummy regulator
[    3.418542] cpufreq_cpu0: failed to scale voltage up: -22
[    3.424364] cpufreq_cpu0: failed to scale voltage up: -22
[    3.437140] ALSA device list:
[    3.440373]   No soundcards found.
[    3.444922] Freeing init memory: 264K
[    3.448972] Failed to execute /init
[    4.521946] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    6.111067] net eth0: initializing cpsw version 1.12 (0)
[    6.119979] net eth0: phy found : id is : 0x7c0f1
[    6.125399] libphy: PHY 4a101000.mdio:01 not found
[    6.130596] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   10.266852] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Jan 13 08:34:39 (none) local0.err cgminer: Miner compile time: Fri Jan 12 19:41:57 CST 2018 type: Antminer L3+ Blissz v1.0
Jan 13 08:34:39 (none) local0.warn cgminer: Started cgminer 4.10.0
Jan 13 08:34:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio51/value  chain 0
Jan 13 08:34:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio48/value  chain 1
Jan 13 08:34:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio47/value  chain 2
Jan 13 08:34:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio44/value  chain 3
Jan 13 08:34:39 (none) local0.notice cgminer[361]: detect total chain num 4
Jan 13 08:34:39 (none) local0.notice cgminer[361]: i2c init ok
Jan 13 08:34:50 (none) local0.notice cgminer[361]: in tty_init
Jan 13 08:34:50 (none) local0.notice cgminer[361]: tty_init 0
Jan 13 08:34:50 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[0]
Jan 13 08:34:51 (none) local0.notice cgminer[361]: tty_init 1
Jan 13 08:34:51 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[1]
Jan 13 08:34:51 (none) local0.notice cgminer[361]: tty_init 2
Jan 13 08:34:51 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[2]
Jan 13 08:34:51 (none) local0.notice cgminer[361]: tty_init 3
Jan 13 08:34:51 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[3]
Jan 13 08:34:51 (none) local0.notice cgminer[361]: open device over
Jan 13 08:34:51 (none) local0.notice cgminer[361]: send cmd to get chip address
Jan 13 08:34:53 (none) local0.notice cgminer[361]: Chain 0 ASIC 72 !!!
Jan 13 08:34:53 (none) local0.notice cgminer[361]: Chain 1 ASIC 72 !!!
Jan 13 08:34:53 (none) local0.notice cgminer[361]: Chain 2 ASIC 72 !!!
Jan 13 08:34:53 (none) local0.notice cgminer[361]: Chain 3 ASIC 72 !!!
Jan 13 08:34:53 (none) local0.notice cgminer[361]: addrInterval = '3'
Jan 13 08:34:53 (none) local0.notice cgminer[361]: software_set_address: chain 0 has 72 ASIC, and addrInterval is 3
Jan 13 08:34:53 (none) local0.notice cgminer[361]: Now Set [0] Chain Address
Jan 13 08:34:54 (none) local0.notice cgminer[361]: software_set_address: chain 1 has 72 ASIC, and addrInterval is 3
Jan 13 08:34:54 (none) local0.notice cgminer[361]: Now Set [1] Chain Address
Jan 13 08:34:55 (none) local0.notice cgminer[361]: software_set_address: chain 2 has 72 ASIC, and addrInterval is 3
Jan 13 08:34:55 (none) local0.notice cgminer[361]: Now Set [2] Chain Address
Jan 13 08:34:56 (none) local0.notice cgminer[361]: software_set_address: chain 3 has 72 ASIC, and addrInterval is 3
Jan 13 08:34:56 (none) local0.notice cgminer[361]: Now Set [3] Chain Address
Jan 13 08:34:57 (none) local0.notice cgminer[361]: frequency = '394'
Jan 13 08:34:57 (none) local0.notice cgminer[361]: dev.timeout = 19
Jan 13 08:34:57 (none) local0.notice cgminer[361]: opt_bitmain_L3_core_temp : 2
Jan 13 08:35:01 (none) local0.notice cgminer[361]: send cmd to open block
Jan 13 08:35:03 (none) local0.err cgminer[361]: low hashrate detection trigger: 476.037734 Mh/s
Jan 13 08:35:03 (none) local0.warn cgminer[361]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Jan 13 08:35:04 (none) local0.warn cgminer[361]: Pool 2 stratum+tcp://hub.miningpoolhub.com:17001 alive, testing stability
Jan 13 08:35:04 (none) local0.warn cgminer[361]: Switching to pool 2 stratum+tcp://hub.miningpoolhub.com:17001
Jan 13 08:35:04 (none) local0.warn cgminer[361]: Pool 1 stratum+tcp://prohashing.com:3333 alive, testing stability
Jan 13 08:35:04 (none) local0.warn cgminer[361]: Switching to pool 1 stratum+tcp://prohashing.com:3333
Jan 13 08:35:08 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:09 (none) local0.warn cgminer[361]: API running in IP access mode on port 4028 (15)
Jan 13 08:35:13 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:18 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:23 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:28 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:33 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:38 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:43 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:48 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:53 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:35:58 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:03 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:08 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:13 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:18 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:23 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:28 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:33 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:38 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:43 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:48 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:53 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:36:58 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:03 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:08 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:13 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:18 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:23 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:28 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:33 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:38 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:43 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:48 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:53 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:37:58 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:03 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:08 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:13 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:18 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:24 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:29 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:34 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:39 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:44 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:49 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:54 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:38:59 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:04 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:09 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:14 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:19 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:24 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:29 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:34 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:39 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:40 (none) local0.warn cgminer[361]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 13 08:39:44 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:49 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:54 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:39:59 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:04 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:09 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:14 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:19 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:24 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:29 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:34 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:39 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:44 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:49 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:54 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:40:59 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:04 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:09 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:14 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:19 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:24 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:29 (none) local0.info cgminer[361]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 13 08:41:31 (none) local0.err cgminer: Miner compile time: Fri Jan 12 19:41:57 CST 2018 type: Antminer L3+ Blissz v1.0
Jan 13 08:41:31 (none) local0.warn cgminer: Started cgminer 4.10.0
Jan 13 08:41:31 (none) local0.notice cgminer[31059]:  detected at /sys/class/gpio/gpio51/value  chain 0
Jan 13 08:41:31 (none) local0.notice cgminer[31059]:  detected at /sys/class/gpio/gpio48/value  chain 1
Jan 13 08:41:31 (none) local0.notice cgminer[31059]:  detected at /sys/class/gpio/gpio47/value  chain 2
Jan 13 08:41:31 (none) local0.notice cgminer[31059]:  detected at /sys/class/gpio/gpio44/value  chain 3
Jan 13 08:41:31 (none) local0.notice cgminer[31059]: detect total chain num 4
Jan 13 08:41:31 (none) local0.notice cgminer[31059]: i2c init ok
Jan 13 08:41:42 (none) local0.notice cgminer[31059]: in tty_init
Jan 13 08:41:42 (none) local0.notice cgminer[31059]: tty_init 0
Jan 13 08:41:42 (none) local0.notice cgminer[31059]: Start A New Asic Response.Chain Id:[0]
Jan 13 08:41:42 (none) local0.notice cgminer[31059]: tty_init 1
Jan 13 08:41:42 (none) local0.notice cgminer[31059]: Start A New Asic Response.Chain Id:[1]
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: tty_init 2
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: Start A New Asic Response.Chain Id:[2]
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: tty_init 3
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: Start A New Asic Response.Chain Id:[3]
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: open device over
Jan 13 08:41:43 (none) local0.notice cgminer[31059]: send cmd to get chip address
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: Chain 0 ASIC 72 !!!
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: Chain 1 ASIC 72 !!!
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: Chain 2 ASIC 72 !!!
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: Chain 3 ASIC 72 !!!
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: addrInterval = '3'
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: software_set_address: chain 0 has 72 ASIC, and addrInterval is 3
Jan 13 08:41:45 (none) local0.notice cgminer[31059]: Now Set [0] Chain Address
Jan 13 08:41:46 (none) local0.notice cgminer[31059]: software_set_address: chain 1 has 72 ASIC, and addrInterval is 3
Jan 13 08:41:46 (none) local0.notice cgminer[31059]: Now Set [1] Chain Address
Jan 13 08:41:47 (none) local0.notice cgminer[31059]: software_set_address: chain 2 has 72 ASIC, and addrInterval is 3
Jan 13 08:41:47 (none) local0.notice cgminer[31059]: Now Set [2] Chain Address
Jan 13 08:41:48 (none) local0.notice cgminer[31059]: software_set_address: chain 3 has 72 ASIC, and addrInterval is 3
Jan 13 08:41:48 (none) local0.notice cgminer[31059]: Now Set [3] Chain Address
Jan 13 08:41:49 (none) local0.notice cgminer[31059]: frequency = '394'
Jan 13 08:41:49 (none) local0.notice cgminer[31059]: dev.timeout = 19
Jan 13 08:41:49 (none) local0.notice cgminer[31059]: opt_bitmain_L3_core_temp : 2
Jan 13 08:41:52 (none) local0.notice cgminer[31059]: send cmd to open block
Jan 13 08:41:55 (none) local0.err cgminer[31059]: low hashrate detection trigger: 476.037734 Mh/s
Jan 13 08:41:55 (none) local0.warn cgminer[31059]: Pool 3 stratum+tcp://litecoinpool.org:3333 alive, testing stability
Jan 13 08:41:55 (none) local0.warn cgminer[31059]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 13 08:41:55 (none) local0.info cgminer[31059]: Send extranonce.subscribe for stratum pool 2
Jan 13 08:41:55 (none) local0.warn cgminer[31059]: Pool 2 stratum+tcp://scrypt.eu.nicehash.com:3333 alive, testing stability
Jan 13 08:41:55 (none) local0.warn cgminer[31059]: Switching to pool 2 stratum+tcp://scrypt.eu.nicehash.com:3333
Jan 13 08:41:56 (none) local0.warn cgminer[31059]: Pool 1 stratum+tcp://hub.miningpoolhub.com:17001 alive, testing stability
Jan 13 08:41:56 (none) local0.warn cgminer[31059]: Switching to pool 1 stratum+tcp://hub.miningpoolhub.com:17001
Jan 13 08:41:56 (none) local0.warn cgminer[31059]: Pool 0 stratum+tcp://prohashing.com:3333 alive, testing stability
Jan 13 08:41:56 (none) local0.warn cgminer[31059]: Switching to pool 0 stratum+tcp://prohashing.com:3333
Jan 13 08:42:01 (none) local0.warn cgminer[31059]: API running in IP access mode on port 4028 (19)
Jan 13 08:46:32 (none) local0.warn cgminer[31059]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 13 09:00:40 (none) local0.err cgminer: Miner compile time: Fri Jan 12 19:41:57 CST 2018 type: Antminer L3+ Blissz v1.0
Jan 13 09:00:40 (none) local0.warn cgminer: Started cgminer 4.10.0
Jan 13 09:00:40 (none) local0.notice cgminer[11315]:  detected at /sys/class/gpio/gpio51/value  chain 0
Jan 13 09:00:40 (none) local0.notice cgminer[11315]:  detected at /sys/class/gpio/gpio48/value  chain 1
Jan 13 09:00:40 (none) local0.notice cgminer[11315]:  detected at /sys/class/gpio/gpio47/value  chain 2
Jan 13 09:00:40 (none) local0.notice cgminer[11315]:  detected at /sys/class/gpio/gpio44/value  chain 3
Jan 13 09:00:40 (none) local0.notice cgminer[11315]: detect total chain num 4
Jan 13 09:00:40 (none) local0.notice cgminer[11315]: i2c init ok
Jan 13 09:00:51 (none) local0.notice cgminer[11315]: in tty_init
Jan 13 09:00:51 (none) local0.notice cgminer[11315]: tty_init 0
Jan 13 09:00:51 (none) local0.notice cgminer[11315]: Start A New Asic Response.Chain Id:[0]
Jan 13 09:00:51 (none) local0.notice cgminer[11315]: tty_init 1
Jan 13 09:00:51 (none) local0.notice cgminer[11315]: Start A New Asic Response.Chain Id:[1]
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: tty_init 2
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: Start A New Asic Response.Chain Id:[2]
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: tty_init 3
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: Start A New Asic Response.Chain Id:[3]
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: open device over
Jan 13 09:00:52 (none) local0.notice cgminer[11315]: send cmd to get chip address
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: Chain 0 ASIC 72 !!!
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: Chain 1 ASIC 72 !!!
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: Chain 2 ASIC 72 !!!
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: Chain 3 ASIC 72 !!!
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: addrInterval = '3'
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: software_set_address: chain 0 has 72 ASIC, and addrInterval is 3
Jan 13 09:00:54 (none) local0.notice cgminer[11315]: Now Set [0] Chain Address
Jan 13 09:00:55 (none) local0.notice cgminer[11315]: software_set_address: chain 1 has 72 ASIC, and addrInterval is 3
Jan 13 09:00:55 (none) local0.notice cgminer[11315]: Now Set [1] Chain Address
Jan 13 09:00:56 (none) local0.notice cgminer[11315]: software_set_address: chain 2 has 72 ASIC, and addrInterval is 3
Jan 13 09:00:56 (none) local0.notice cgminer[11315]: Now Set [2] Chain Address
Jan 13 09:00:57 (none) local0.notice cgminer[11315]: software_set_address: chain 3 has 72 ASIC, and addrInterval is 3
Jan 13 09:00:57 (none) local0.notice cgminer[11315]: Now Set [3] Chain Address
Jan 13 09:00:58 (none) local0.notice cgminer[11315]: frequency = '394'
Jan 13 09:00:58 (none) local0.notice cgminer[11315]: dev.timeout = 19
Jan 13 09:00:58 (none) local0.notice cgminer[11315]: opt_bitmain_L3_core_temp : 2
Jan 13 09:01:01 (none) local0.notice cgminer[11315]: send cmd to open block
Jan 13 09:01:04 (none) local0.err cgminer[11315]: low hashrate detection trigger: 476.037734 Mh/s
Jan 13 09:01:04 (none) local0.warn cgminer[11315]: Pool 3 stratum+tcp://litecoinpool.org:3333 alive, testing stability
Jan 13 09:01:04 (none) local0.warn cgminer[11315]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 13 09:01:04 (none) local0.info cgminer[11315]: Send extranonce.subscribe for stratum pool 2
Jan 13 09:01:04 (none) local0.warn cgminer[11315]: Pool 2 stratum+tcp://scrypt.eu.nicehash.com:3333 alive, testing stability
Jan 13 09:01:04 (none) local0.warn cgminer[11315]: Switching to pool 2 stratum+tcp://scrypt.eu.nicehash.com:3333
Jan 13 09:01:05 (none) local0.warn cgminer[11315]: Pool 1 stratum+tcp://hub.miningpoolhub.com:17001 alive, testing stability
Jan 13 09:01:05 (none) local0.warn cgminer[11315]: Switching to pool 1 stratum+tcp://hub.miningpoolhub.com:17001
Jan 13 09:01:05 (none) local0.warn cgminer[11315]: Pool 0 stratum+tcp://prohashing.com:3333 alive, testing stability
Jan 13 09:01:05 (none) local0.warn cgminer[11315]: Switching to pool 0 stratum+tcp://prohashing.com:3333
Jan 13 09:01:10 (none) local0.warn cgminer[11315]: API running in IP access mode on port 4028 (15)
Jan 13 09:05:41 (none) local0.warn cgminer[11315]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 13 09:07:31 (none) local0.warn cgminer[11315]: Switching to pool 0 stratum+tcp://prohashing.com:3333

The daily option for devfee did not work. After start it mines to dev. When the options "Automatic Reboot on low hashrate" and "Automatic Reboot on high number of ASIC failures" are selected the miner will mine more then the daily fee time.

blissz

sr. member

Activity: 336

Merit: 258

Quote from: Michi_A on January 13, 2018, 04:03:28 AM

Same here. Moreover the Miner Status page shows no entries.

can you make a screen shot?

blissz

sr. member

Activity: 336

Merit: 258

Quote from: dganm on January 13, 2018, 03:56:09 AM

I'm testing my l3+ with the new 1.0 stable version and every time I restart the miner, after some minutes it begins to mine the dev fee.

I have selected the option "Mine dev fee daily instead of every 2 hours".

While still tuning / restarting a lot, please don't use the the daily option as it will always start with the devfee after 5 minutes. Once you found your settings, the daily option is the most effective.

Michi_A

newbie

Activity: 5

Merit: 0

Same here. Moreover the Miner Status page shows no entries.

dganm

newbie

Activity: 8

Merit: 0

I'm testing my l3+ with the new 1.0 stable version and every time I restart the miner, after some minutes it begins to mine the dev fee.

I have selected the option "Mine dev fee daily instead of every 2 hours".

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

unreal1

newbie

Activity: 12

Merit: 0

Quote from: blissz on January 12, 2018, 09:07:00 PM

v1.0 :: 12/01/2018 :: L3+ recommended update

Download:
https://mega.nz/#!z9gklSSL!jBfvhN-YRiC417_GQwon9-O0PCbXbIqTdXCSt7evF80

changelog v1.0 L3+ version 12/01/2018:
- first stable release Cool

- reboot (and cool down) on too high temperatures (PCB temp > 85 deg celcius)
- optional: reboot on too high ASIC fail count
- optional: reboot on detection of low hashrate (if falls down 8% under the expected hashrate)
- now shows the voltage setting on the overview page
- fixed showing high FAN speed RPM's
- added option to mine the dev fee one time a day (increases daily profit a bit in case you run it constantly on one pool)

Thanks, appreciate the dev fee once a day since I mine from the same pool.

blissz

sr. member

Activity: 336

Merit: 258

v1.0 :: 12/01/2018 :: L3+ recommended update

Download:
https://mega.nz/#!z9gklSSL!jBfvhN-YRiC417_GQwon9-O0PCbXbIqTdXCSt7evF80

changelog v1.0 L3+ version 12/01/2018:
- first stable release Cool

- reboot (and cool down) on too high temperatures (PCB temp > 85 deg celcius)
- optional: reboot on too high ASIC fail count
- optional: reboot on detection of low hashrate (if falls down 8% under the expected hashrate)
- now shows the voltage setting on the overview page
- fixed showing high FAN speed RPM's
- added option to mine the dev fee one time a day (increases daily profit a bit in case you run it constantly on one pool)

blissz

sr. member

Activity: 336

Merit: 258

Quote from: xcajun21 on January 12, 2018, 05:29:36 PM

I have a hosted miner so would like to ask some questions. I have no access to the miner settings.

1. Restart on low hash rate is available on stock firmware? Is this option really useful?
In case you run it on the limit yes, as it will automatically restart in case one of your chains fail.
2. Lower voltage come default with this firmware? if not, what settings are recommended for ultra stability, but a bit lower consumption?
voltage to lowest, and frequency ~400 Mhz
3. Are Fan speeds changed after updating?
Only during startup it runs slow. After that it starts on the default fan speed. But at lowest voltage I can recommend the silent preset.
4. The fee from changing to dev pool and the restart of work loads, does affect the profitability a lot?
Not much, but the v1.0 will have the 24h defvee mode, so it will only mine on the devfee pool once a day

Thanks.

comments inside the quote Wink

xcajun21

sr. member

Activity: 742

Merit: 252

I have a hosted miner so would like to ask some questions. I have no access to the miner settings.

1. Restart on low hash rate is available on stock firmware? Is this option really useful?
2. Lower voltage come default with this firmware? if not, what settings are recommended for ultra stability, but a bit lower consumption?
3. Are Fan speeds changed after updating?
4. The fee from changing to dev pool and the restart of work loads, does affect the profitability a lot?

Thanks.

dottat

newbie

Activity: 48

Merit: 0

Quote from: dlezama on January 12, 2018, 12:27:30 PM

If anybody is interested in buying an L3+ Jan batch for 0.3 BTC + shipping drop me a PM. It's still under warranty as I haven't installed blissz firmware yet. If I don't sell it I'll probably give this a try soon, since the D3 version is working really well for me.

And what might you be asking for that? stateside or not?

dlezama

member

Activity: 140

Merit: 17

If anybody is interested in buying an L3+ Jan batch for 0.3 BTC + shipping drop me a PM. It's still under warranty as I haven't installed blissz firmware yet. If I don't sell it I'll probably give this a try soon, since the D3 version is working really well for me.

majdi105

newbie

Activity: 64

Merit: 0

we need one for s9 but l3+ is very slient and it consume only 750w

olebol

newbie

Activity: 3

Merit: 0

Quote from: dottat on January 11, 2018, 11:22:16 PM

Quote from: olebol on January 11, 2018, 05:03:00 PM

Hey Blissz

first of all, thx again for such a good firmware (like for D3)

Jan 11 22:01:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)

Do you happen to have miner pool 1 blank on the miner configuration page? If you do, you will see this error.

no ... my first pool is the same like before... dont know why this is shown
i have no problems but the kernel log show that errors, any ideas Blissz?

dottat

newbie

Activity: 48

Merit: 0

Quote from: olebol on January 11, 2018, 05:03:00 PM

Hey Blissz

first of all, thx again for such a good firmware (like for D3)

Jan 11 22:01:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)

Do you happen to have miner pool 1 blank on the miner configuration page? If you do, you will see this error.

blastar

newbie

Activity: 42

Merit: 0

Quote from: manu82 on January 11, 2018, 05:22:05 AM

Quote from: Crazytoo on January 10, 2018, 01:03:36 PM

Hey can you also have a look at S4 S7 S9
greate work btw

Me too interested on S9. I hate the noise who make when go over 77°.

Just a suggestion for Blissz, I prefer to pay a license (like 100$ forever blocked on the serial number of the miner) instead to give you a fee, but it's only my opinion.

Anyway, great works! Thank you

I suggested the same early on when he started with D3, with detailed info about how to do it using the MAC address of the miner, but Blissz never replied! I guess he wants to keep it this way! Sad

olebol

newbie

Activity: 3

Merit: 0

Hey Blissz

first of all, thx again for such a good firmware (like for D3)

i got following message on Kernel since i use the Firmware :

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238772k/238772k available, 23372k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000355] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015438] pid_max: default: 32768 minimum: 301
[ 0.015670] Security Framework initialized
[ 0.015765] Mount-cache hash table entries: 512
[ 0.024584] Initializing cgroup subsys cpuacct
[ 0.024616] Initializing cgroup subsys memory
[ 0.024677] Initializing cgroup subsys blkio
[ 0.024814] CPU: Testing write buffer coherency: ok
[ 0.025389] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025467] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026795] Brought up 1 CPUs
[ 0.026819] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028111] devtmpfs: initialized
[ 0.092466] pinctrl core: initialized pinctrl subsystem
[ 0.092682] rstctl core: initialized rstctl subsystem
[ 0.093174] regulator-dummy: no parameters
[ 0.093747] NET: Registered protocol family 16
[ 0.094451] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104120] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104305] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105387] platform 49000000.edma: alias fck already exists
[ 0.105422] platform 49000000.edma: alias fck already exists
[ 0.105450] platform 49000000.edma: alias fck already exists
[ 0.106593] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106775] OMAP GPIO hardware version 0.1
[ 0.108174] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109494] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110811] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111443] of_get_named_gpio_flags exited with status 52
[ 0.111473] gpio-rctrl rstctl.3: loaded OK
[ 0.116580] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119786] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.121976] cpsw.0: No hwaddr in dt. Using 50:8c:b1:fa:fa:83 from efuse
[ 0.122007] cpsw.1: No hwaddr in dt. Using 50:8c:b1:fa:fa:85 from efuse
[ 0.137544] bio: create slab at 0
[ 0.149668] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.149911] of_get_named_gpio_flags: can't parse gpios property
[ 0.150151] vmmcsd_fixed: 3300 mV
[ 0.153308] SCSI subsystem initialized
[ 0.153759] usbcore: registered new interface driver usbfs
[ 0.153873] usbcore: registered new interface driver hub
[ 0.154199] usbcore: registered new device driver usb
[ 0.156316] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156351] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156548] media: Linux media interface: v0.10
[ 0.156644] Linux video capture interface: v2.00
[ 0.156761] pps_core: LinuxPPS API ver. 1 registered
[ 0.156777] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.157494] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158674] Switching to clocksource gp_timer
[ 0.176685] NET: Registered protocol family 2
[ 0.177679] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177769] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177859] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.177951] TCP: reno registered
[ 0.177978] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178024] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178516] NET: Registered protocol family 1
[ 0.179106] RPC: Registered named UNIX socket transport module.
[ 0.179126] RPC: Registered udp transport module.
[ 0.179140] RPC: Registered tcp transport module.
[ 0.179154] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179540] Trying to unpack rootfs image as initramfs...
[ 1.936008] Freeing initrd memory: 12144K
[ 1.936733] CPU PMU: probing PMU on CPU 0
[ 1.936766] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.937297] omap2_mbox_probe: platform not supported
[ 1.941236] VFS: Disk quotas dquot_6.5.2
[ 1.941476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.942862] NFS: Registering the id_resolver key type
[ 1.942957] Key type id_resolver registered
[ 1.942974] Key type id_legacy registered
[ 1.943041] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.943474] msgmni has been set to 490
[ 1.946366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.946393] io scheduler noop registered
[ 1.946409] io scheduler deadline registered
[ 1.946467] io scheduler cfq registered (default)
[ 1.950521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.952952] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.953241] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.614087] console [ttyO0] enabled
[ 2.618637] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.627308] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.635995] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.644603] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.653626] [drm] Initialized drm 1.1.0 20060810
[ 2.672260] brd: module loaded
[ 2.682555] loop: module loaded
[ 2.686778] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.696719] nand_get_flash_type: 2c,da against 2c,da
[ 2.702244] ONFI param page 0 valid
[ 2.705917] ONFI flash detected
[ 2.709236] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 2.721149] omap2-nand: detected x8 NAND flash
[ 2.725815] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.731398] omap2-nand: using custom ecc layout
[ 2.736241] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.742635] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.748313] 0x000000000000-0x000000020000 : "spl"
[ 2.755121] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.762583] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.769931] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.777352] 0x000000080000-0x000000240000 : "u-boot"
[ 2.785571] 0x000000240000-0x000000260000 : "bootenv"
[ 2.792522] 0x000000260000-0x000000280000 : "fdt"
[ 2.799107] 0x000000280000-0x000000780000 : "kernel"
[ 2.810123] 0x000000800000-0x000001c00000 : "root"
[ 2.833636] 0x000001c00000-0x000003000000 : "config"
[ 2.857422] OneNAND driver initializing
[ 2.863163] usbcore: registered new interface driver asix
[ 2.868981] usbcore: registered new interface driver cdc_ether
[ 2.875226] usbcore: registered new interface driver smsc95xx
[ 2.881344] usbcore: registered new interface driver net1080
[ 2.887368] usbcore: registered new interface driver cdc_subset
[ 2.893661] usbcore: registered new interface driver zaurus
[ 2.899667] usbcore: registered new interface driver cdc_ncm
[ 2.906400] usbcore: registered new interface driver cdc_acm
[ 2.912361] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.920743] Initializing USB Mass Storage driver...
[ 2.925985] usbcore: registered new interface driver usb-storage
[ 2.932285] USB Mass Storage support registered.
[ 2.937326] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.944086] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.949322] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.958094] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.958116] musb-hdrc: MHDRC RTL version 2.0
[ 2.958131] musb-hdrc: setup fifo_mode 4
[ 2.958159] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.958307] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.963350] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.969399] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.974639] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.983408] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.983428] musb-hdrc: MHDRC RTL version 2.0
[ 2.983442] musb-hdrc: setup fifo_mode 4
[ 2.983464] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.983601] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.988642] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 2.993951] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.000326] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.008803] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.008910] usb usb1: default language 0x0409
[ 3.008970] usb usb1: udev 1, busnum 1, minor = 0
[ 3.008993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.016138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.023712] usb usb1: Product: MUSB HDRC host driver
[ 3.028928] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.034595] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.040586] usb usb1: usb_probe_device
[ 3.040614] usb usb1: configuration #1 chosen from 1 choice
[ 3.040680] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.040881] hub 1-0:1.0: usb_probe_interface
[ 3.040903] hub 1-0:1.0: usb_probe_interface - got id
[ 3.040930] hub 1-0:1.0: USB hub found
[ 3.044939] hub 1-0:1.0: 1 port detected
[ 3.049079] hub 1-0:1.0: standalone hub
[ 3.049098] hub 1-0:1.0: individual port power switching
[ 3.049117] hub 1-0:1.0: no over-current protection
[ 3.049134] hub 1-0:1.0: Single TT
[ 3.049155] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.049175] hub 1-0:1.0: power on to power good time: 10ms
[ 3.049230] hub 1-0:1.0: local power source is good
[ 3.049345] hub 1-0:1.0: enabling power on all ports
[ 3.050460] mousedev: PS/2 mouse device common for all mice
[ 3.058427] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.065919] 44e3e000.rtc: already running
[ 3.070415] i2c /dev entries driver
[ 3.075477] pps_ldisc: PPS line discipline registered
[ 3.080953] Driver for 1-wire Dallas network protocol.
[ 3.088216] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.095793] cpuidle: using governor ladder
[ 3.100124] cpuidle: using governor menu
[ 3.104705] of_get_named_gpio_flags exited with status 6
[ 3.104726] of_get_named_gpio_flags: can't parse gpios property
[ 3.104742] of_get_named_gpio_flags: can't parse gpios property
[ 3.104779] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.112006] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.118818] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.126041] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.133407] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.140357] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.151085] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.175004] of_get_named_gpio_flags exited with status -517
[ 3.175071] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.182857] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.189638] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.196835] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.204993] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.211283] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.218456] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.230736] usbcore: registered new interface driver usbhid
[ 3.236661] usbhid: USB HID core driver
[ 3.243539] TCP: cubic registered
[ 3.247060] Initializing XFRM netlink socket
[ 3.251634] NET: Registered protocol family 17
[ 3.256525] NET: Registered protocol family 15
[ 3.261375] Key type dns_resolver registered
[ 3.266009] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.274090] ThumbEE CPU extension supported.
[ 3.278601] Registering SWP/SWPB emulation handler
[ 3.284616] registered taskstats version 1
[ 3.291233] of_get_named_gpio_flags exited with status -517
[ 3.291309] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.348283] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.354734] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.369255] libphy: 4a101000.mdio: probed
[ 3.373567] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.383809] Detected MACID = 50:8c:b1:fa:fa:83
[ 3.388490] cpsw 4a100000.ethernet: NAPI disabled
[ 3.393884] of_get_named_gpio_flags exited with status -517
[ 3.393950] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.402673] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.411956] cpu0 supply cpu0 not found, using dummy regulator
[ 3.418439] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.424259] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.437041] ALSA device list:
[ 3.440275] No soundcards found.
[ 3.444827] Freeing init memory: 264K
[ 3.448879] Failed to execute /init
[ 4.467953] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.970295] net eth0: initializing cpsw version 1.12 (0)
[ 5.979284] net eth0: phy found : id is : 0x7c0f1
[ 5.984691] libphy: PHY 4a101000.mdio:01 not found
[ 5.989886] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 10.126094] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Jan 11 21:53:44 (none) local0.err cgminer: Miner compile time: Fri Jan 05 23:17:57 CST 2018 type: Antminer L3+ Blissz v0.02 beta
Jan 11 21:53:44 (none) local0.warn cgminer: Started cgminer 4.10.0
Jan 11 21:53:44 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Jan 11 21:53:44 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Jan 11 21:53:44 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Jan 11 21:53:44 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio44/value chain 3
Jan 11 21:53:44 (none) local0.notice cgminer[375]: detect total chain num 4
Jan 11 21:53:44 (none) local0.notice cgminer[375]: i2c init ok
Jan 11 21:53:55 (none) local0.notice cgminer[375]: in tty_init
Jan 11 21:53:55 (none) local0.notice cgminer[375]: tty_init 0
Jan 11 21:53:55 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Jan 11 21:53:56 (none) local0.notice cgminer[375]: tty_init 1
Jan 11 21:53:56 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Jan 11 21:53:56 (none) local0.notice cgminer[375]: tty_init 2
Jan 11 21:53:56 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Jan 11 21:53:56 (none) local0.notice cgminer[375]: tty_init 3
Jan 11 21:53:56 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[3]
Jan 11 21:53:56 (none) local0.notice cgminer[375]: open device over
Jan 11 21:53:56 (none) local0.notice cgminer[375]: send cmd to get chip address
Jan 11 21:53:58 (none) local0.notice cgminer[375]: Chain 0 ASIC 72 !!!
Jan 11 21:53:58 (none) local0.notice cgminer[375]: Chain 1 ASIC 72 !!!
Jan 11 21:53:58 (none) local0.notice cgminer[375]: Chain 2 ASIC 72 !!!
Jan 11 21:53:58 (none) local0.notice cgminer[375]: Chain 3 ASIC 72 !!!
Jan 11 21:53:58 (none) local0.notice cgminer[375]: addrInterval = '3'
Jan 11 21:53:58 (none) local0.notice cgminer[375]: software_set_address: chain 0 has 72 ASIC, and addrInterval is 3
Jan 11 21:53:59 (none) local0.notice cgminer[375]: Now Set

Chain Address

Jan 11 21:53:59 (none) local0.notice cgminer[375]: software_set_address: chain 1 has 72 ASIC, and addrInterval is 3
Jan 11 21:53:59 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Jan 11 21:54:00 (none) local0.notice cgminer[375]: software_set_address: chain 2 has 72 ASIC, and addrInterval is 3
Jan 11 21:54:00 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Jan 11 21:54:01 (none) local0.notice cgminer[375]: software_set_address: chain 3 has 72 ASIC, and addrInterval is 3
Jan 11 21:54:01 (none) local0.notice cgminer[375]: Now Set [3] Chain Address
Jan 11 21:54:02 (none) local0.notice cgminer[375]: frequency = '469'
Jan 11 21:54:02 (none) local0.notice cgminer[375]: dev.timeout = 15
Jan 11 21:54:03 (none) local0.notice cgminer[375]: opt_bitmain_L3_core_temp : 2
Jan 11 21:54:06 (none) local0.notice cgminer[375]: send cmd to open block
Jan 11 21:54:08 (none) local0.warn cgminer[375]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Jan 11 21:54:09 (none) local0.info cgminer[375]: Send extranonce.subscribe for stratum pool 1
Jan 11 21:54:13 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:14 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Jan 11 21:54:18 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:23 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:28 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:33 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:38 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:43 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:48 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:53 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:54:58 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:03 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:08 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:13 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:18 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:23 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:28 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:33 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:38 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:43 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:48 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:53 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:55:58 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:03 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:08 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:56:59 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:04 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:09 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:57:59 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:04 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:09 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:45 (none) local0.warn cgminer[375]: Switching to pool 3 stratum+tcp://litecoinpool.org:3333
Jan 11 21:58:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:58:59 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:04 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:09 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 21:59:59 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:04 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:09 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:35 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://hash-to-coins.com:4444
Jan 11 22:00:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:00:59 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:04 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:09 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:14 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:19 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:24 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:29 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:34 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:39 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:44 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:49 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)
Jan 11 22:01:54 (none) local0.info cgminer[375]: Failed to getaddrinfo for stratum+tcp://:(null)

EEM

member

Activity: 194

Merit: 32

Quote from: blissz on January 06, 2018, 11:02:29 AM

Quote from: EEM on January 06, 2018, 07:32:19 AM

Thanks for your firmware. I have some questions. Thanks for the answers.

1. I'm worried about chips temperature. After the switching to the silent mode, the temperature of chips were ~63. I switched to Fan mode: "Auto Performance" - what it means? Will fans be too noisy at this mode? And why isn't there option "Stop running when temprerature is over 80℃"

1)Auto silent mode will run the fans at a bit lower speed, but will increase to higher speeds when temps go up. Auto performance does basicly the same, but tries to keep the temps ~8 degrees lower, so the fans will run a

When the temperature became over 80℃ Would ASIC stop?
Thanks.

Topic: Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) - page 4. (Read 12036 times)