Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 26. (Read 346285 times)

Quote from: jewgalo on May 17, 2014, 03:23:12 PM

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

I can't tell. There are no specs about the 12V rail. I'd proceed with caution.

If you intend to drive more than one ant, and are prepared to spend $100 on a decent PSU, consider this one:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16817182063

Will drive 3xOCd S1s with room to spare.

M

can't shell out that much thats for sure... i'd rather not hook up more then one ant to one psu... so i would need about 6-8 psu's total... anything recommendations in the $100 range if possible would be appreciated...

3 PSU = 3 power cords, 3 boxes, and extra cables

If you're going to do $100 a PSU, the one above will save you $70 right out of the box.

However, as others have said, there are cheaper ways to do it.

M

Here is the one:

http://www.ebay.co.uk/itm/IBM-74P4453-Bladecenter-E-2000W-Power-Supply-zj-/261410878512?pt=US_Network_Switch_Power_Supplies&hash=item3cdd4d7430

Price is so low its almost stealing.
Cables will be near nothing and only time to mod this one. This one will run 4 miners OC.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: allcoinminer on May 17, 2014, 04:12:27 PM

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

I can't tell. There are no specs about the 12V rail. I'd proceed with caution.

If you intend to drive more than one ant, and are prepared to spend $100 on a decent PSU, consider this one:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16817182063

Will drive 3xOCd S1s with room to spare.

M

can't shell out that much thats for sure... i'd rather not hook up more then one ant to one psu... so i would need about 6-8 psu's total... anything recommendations in the $100 range if possible would be appreciated...

3 PSU = 3 power cords, 3 boxes, and extra cables

If you're going to do $100 a PSU, the one above will save you $70 right out of the box.

However, as others have said, there are cheaper ways to do it.

M

s1lverbox

legendary

Activity: 2324

Merit: 1039

Quote from: s1lverbox on May 17, 2014, 04:06:03 PM

Quote from: alexrossi on May 17, 2014, 04:05:33 PM

Quote from: s1lverbox on May 17, 2014, 04:06:03 PM

Once i had my hands on poweredge 2950 i had massive smile. This cost me 10Gbp per one.
How big difference is that.

I'm interested in a couple of pieces, can you link a website that is currently selling them?

You in Uk?

https://i.imgur.com/cYygqGY.jpg

Cables cost me about 5gbp and psu about 11gbp.
I had to add resistor to fan on PSU as this jet engine noise is so loouudd.

Whats their efficiency?

12v rail 62.4A and 3.3vsb 5.5A

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: alexrossi on May 17, 2014, 04:05:33 PM

Quote from: alexrossi on May 17, 2014, 04:05:33 PM

Once i had my hands on poweredge 2950 i had massive smile. This cost me 10Gbp per one.
How big difference is that.

I'm interested in a couple of pieces, can you link a website that is currently selling them?

You in Uk?

https://i.imgur.com/cYygqGY.jpg

Cables cost me about 5gbp and psu about 11gbp.
I had to add resistor to fan on PSU as this jet engine noise is so loouudd.

Whats their efficiency?

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

Nope, Italy

s1lverbox

legendary

Activity: 2324

Merit: 1039

Once i had my hands on poweredge 2950 i had massive smile. This cost me 10Gbp per one.
How big difference is that.

I'm interested in a couple of pieces, can you link a website that is currently selling them?

You in Uk?

Cables cost me about 5gbp and psu about 11gbp.
I had to add resistor to fan on PSU as this jet engine noise is so loouudd.

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

Quote from: alexrossi on May 17, 2014, 03:58:03 PM

Once i had my hands on poweredge 2950 i had massive smile. This cost me 10Gbp per one.
How big difference is that.

I'm interested in a couple of pieces, can you link a website that is currently selling them?

s1lverbox

legendary

Activity: 2324

Merit: 1039

Quote from: s1lverbox on May 17, 2014, 03:50:50 PM

Threads about mod is on BTCtalk and its not that really difficult.
You can have more for less easily.

unfortunatly jewgalo is searching for PnP PSU, we all know that they are a lot more expensive compared to a modded server psu Wink

I agree, but in mining at least for me most important is to cut the cost's and maximize profit.
But anyway, there are lot's of corsair cheap psu(cx 500 modular or normal).cx500 will do the job even for OC miners.
I had them at the beginning, but then i was tired of paying like 45gbp per new psu.

Once i had my hands on poweredge 2950 i had massive smile. This cost me 10Gbp per one.Pci-e cost no more than 5.5 Gbp and 15 minutes of my time to make it --Plug and play
How big difference is that.

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

Quote from: s1lverbox on May 17, 2014, 03:50:50 PM

Threads about mod is on BTCtalk and its not that really difficult.
You can have more for less easily.

unfortunatly jewgalo is searching for PnP PSU, we all know that they are a lot more expensive compared to a modded server psu Wink

s1lverbox

legendary

Activity: 2324

Merit: 1039

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

I can't tell. There are no specs about the 12V rail. I'd proceed with caution.

If you intend to drive more than one ant, and are prepared to spend $100 on a decent PSU, consider this one:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16817182063

Will drive 3xOCd S1s with room to spare.

M

Guys, please. Wht's the point paying for psu almost 230$ when any decent server IBM psu will do the job.
on 2000W IBM server psu you can run easily 4 OC ants and still will be enough power.

Threads about mod is on BTCtalk and its not that really difficult.
You can have more for less easily.

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

I used for varius months a corsair cx500m with a single, not OCed antminer s1: it's working flawlessy without downtime or problems of any kind. It's also one of the cheapest PnP PSU that you can actually find.

jewgalo

newbie

Activity: 44

Merit: 0

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

I can't tell. There are no specs about the 12V rail. I'd proceed with caution.

If you intend to drive more than one ant, and are prepared to spend $100 on a decent PSU, consider this one:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16817182063

Will drive 3xOCd S1s with room to spare.

M

can't shell out that much thats for sure... i'd rather not hook up more then one ant to one psu... so i would need about 6-8 psu's total... anything recommendations in the $100 range if possible would be appreciated...

mdude77

legendary

Activity: 1540

Merit: 1001

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

I can't tell. There are no specs about the 12V rail. I'd proceed with caution.

If you intend to drive more than one ant, and are prepared to spend $100 on a decent PSU, consider this one:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16817182063

Will drive 3xOCd S1s with room to spare.

M

jewgalo

newbie

Activity: 44

Merit: 0

Quote from: alexrossi on May 17, 2014, 12:02:24 PM

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

so if i were looking @ something like this http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139060 would that cover the power source needed to run a factory ant? what about an OC'd ant?

rhj12345

full member

Activity: 138

Merit: 100

Quote from: rhj12345 on May 17, 2014, 11:46:05 AM

So I am willing to trade 7 S2 coupons for $500 USD in BTC.

LOL! s2 coupons has been given away for free/0.01 BTC, your price is just a little bit high

I would consider any real offer, I would just like to offset the cost on a couple of s1's.

mdude77

legendary

Activity: 1540

Merit: 1001

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

It's not so much wattage, it's amperage on the 12V rail. An OC'd S1 uses about 32-33amps on a gold PSU on a 115v line. Make sure whatever you get has enough juice on the 12V line to run as many Ants as you are looking for, and you should be fine.

M

jewgalo

newbie

Activity: 44

Merit: 0

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

i really don't have any time to dedicate to modding... just looking for a cheap PnP... what wattage is recommended for factory or OC'd ants...?

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

so whats the consensus on a PSU for the ants / what's the most popular choice...? what sort of wattage do you need for factory and / or OC'd units...?

If you have some spare time for modding, server psu is the cheapest choice that you can find (Dell PSUs are the most used)

s1lverbox

legendary

Activity: 2324

Merit: 1039