Topic: ANTMINER S3+ Discussion and Support Thread - page 103. (Read 710164 times)

I say this many times

1. make sure your PSU is at least 25 percent greater " I prefer 50 percent" than your miner max power rating fully overclocked to the max

2. Make sure miners are on a breaker in your fuse box in your home by themselves with nothing else on the breaker. also make sure the breaker can supply at least 80 percent of the rated power continuous.

this happened to my every time any appliance "toaster, refrigerator, microwave" or anything with a heavy load was turned on "which my wife is always using" my hash rate on my miners would drop down and I always have had to reset them.

now that I put them on a isolated breaker by itself no problems except for the one bad miner that a bought from "www.112bit.com" they had the cheapest price which I knew at the time. I never do that again the guy is more than likely selling rejected miners that did not pass spec that's why there so cheap.

anyway if you have a billion watt PSU with 100 percent efficiency you will have problems if the continuous power from the wall is not enough. the breaker will not trip or cause a fire that's the worse case but it will cause a whole lot of issues. anyway you get the point.

hey BITMAIN did you ever think about going into the toaster business lol lol

maybe it will be the new S5 that is soppose to be coming out.

change your name to S**TMAIN will your at it.

I am going to make some toast now on my new s3.

 

Anybody can help?


Do I need more power to do reset?


I did this many times and it not help.

Doing reset first time I can see difference- yellow led is turned off and green is going dark, but if I do this second time I don't see any changes on leds- It's ok? It' normal?

In advance ty for any support.

Email them @ [email protected]
 

Do Bitmain actually entertain warranty claims? Received an S3 with one blade DOA, and another with faulty controller. Asked me to document a set of tests for them and email it over. That's like a month ago. No replies of any kind...

Can i run the Antminer S3+ using Corsair VS550?
its a 550W PSU

Thanks advance
and
God Bless!!!!!

seen him whinging earlier about the noise of spondoolies-tech rigs.
i almost said.. 'so don't plug your free one in then' but refrained 

I think they're paying him to post on everybody else's threads except bitmains........

sometimes guesses are more like "informed clarifications"

 

But....but.....that can't be right - cos dogie says so in his "unbiased" guide:

Communication - Great - 10/10

That's a laugh. You'd never guess he was on their payroll eh? 

I do not wish to "rub salt in the wounds" of those who've bricked their machines, but the cardinal rule with this throw away tech is "if it ain't broke, do not fix it!"
There was NO good reason to update any S3 type rig with the Nov firmware. Yes I know it was supposed to fix the reset button and bitmain publicised its release more than any other I've known, but still, there was no need.
The reason I did not even bat an eyelid was because it purported to fix an issue that I had no need for, aka the reset button. My S3 types were running OK to well and have never had a reason to use the reset button. Most nuances that I have encountered with the S3 types are mostly down to my limited IT knowledge, but a quick google search usually resolves those (if not a post in these hallowed pages).

I am aware this post is not sticky, but I'll say it while I can;

If it ain't broke, don't fix it!

I think any logical person would agree with you....but their in China and I'm in North America....so f%! me. However you know how the saying goes:

" Fool me once, shame on you. Fool me twice, shame on me."

Guess what they won't fool me once more...........because they just lost me as an ongoing customer by not honoring the warranty.

 

that'll save me answering PM's cheers dude.

I believe legally it's when you receive the item, so they're wrong.

Use $50SPECIALOFFER when checking out to claim your discount

To add insult to injury, Bitmain tells me my warranty expired eventho I did not receive it until Sept 18th. What's up with that?

 It's kinda like they start  the warranty clock on the day they ship it (- ie: Sept 11th in my case). That's just not right.

if anyone wants a $50 voucher for spondoolies, pm me. they've reduced their prices yet again.

*take that* bitmain for putting out a fail firmware.

Train wreck more like....

It's almost as if bitmain deliberately gave their entire customer base a firmware that f*cks their miners up in the hope that they'll just buy some more as replacements....the fact that they still haven't removed it from their website yet, or don't even comment about it is just astounding.....

Way to go bitmain. How the mighty have fallen.........

I wouldn't have bothered doing a firmware update except i wanted my S3s to work better on Nice Hash. I love NiceHash but this has led to ...well you said it. I can't blame Nicehash tho. Why on earth would Bitmain put out such faulty firmware?

i'm so glad i sold my last S3's last week. this thread is beginning to read like yet another car crash.

Hello,

I did Reset to defaults via browser and it never ends.

Now I see all leds on. green for ethernet is blinkink and other three is on (red, green, yellow). And now I even can't connect via browser.

Anybody know what is wrong and how I can fix this problem.