Topic: ANTMINER S3+ Discussion and Support Thread - page 396. (Read 710164 times)
Bitmain just changed my order to paid status after 13 confirmations
Why is a 1200w not recommended on 3 if it is running at 90% load?
It depends on how efficiently you want to run your PSU. PSUs are most efficient at lower than rated load.
http://en.wikipedia.org/wiki/80_PLUS
My order has gone to:
Unpaid
Unshipped
Expired
Even though I paid at order completion.
What is going on?
Unpaid
Unshipped
Expired
Even though I paid at order completion.
What is going on?
My order is in the same state...weird.
i edited my message sorry, read it 
arggggggggg
arggggggggg
Why me............ just received today 2 S3 and first one i connect just reports that 1 blade is working.... WTH?
?
what can i do??? open it and see if i have to clean something??? ffs
i will test now 2nd unit........... lets see if that one works well.... batch 2
EDIT: OK im stupid xD i was just powering to PCIE of same blade.... so smart xDDDDD i will change it and lets see. sorry hehe
?what can i do??? open it and see if i have to clean something??? ffs
i will test now 2nd unit........... lets see if that one works well.... batch 2
EDIT: OK im stupid xD i was just powering to PCIE of same blade.... so smart xDDDDD i will change it and lets see. sorry hehe
If you need new powersupplies Newegg gives 10% off all orders completed with BTC. Just enter the word bitcoin in the coupon code and pay with BTC
I have a LEPA 1200W PSU, do you guys think three A3 batch 4 will work on one of these units? Is anyone running 3 off a 1000W or 1200W? Would like to hear about it if you are....
You want to run your PSU at below 90% load or 1080 watt. 3 S3s will require 1098 at a minimum. So, 3 S3s can be run with a 1200 W PSU but not recommended.
Why is a 1200w not recommended on 3 if it is running at 90% load?
I have 3 running on a corsair 1200i. Pulls 1050 from the wall. Runs great. A high quality 1200w can run 3 S3s NO PROBLEM!
I have a LEPA 1200W PSU, do you guys think three A3 batch 4 will work on one of these units? Is anyone running 3 off a 1000W or 1200W? Would like to hear about it if you are....
You want to run your PSU at below 90% load or 1080 watt. 3 S3s will require 1098 at a minimum. So, 3 S3s can be run with a 1200 W PSU but not recommended.
Why is a 1200w not recommended on 3 if it is running at 90% load?
Mine has also expired even with 8 confirmations.
BitMaintech.com what is going on? Are you going to refund all the payments your system is failing to acknowledge now that the orders have been automatically canceled?
Yeah, I had 9 confirmations at the time it "Expired"BitMaintech.com what is going on? Are you going to refund all the payments your system is failing to acknowledge now that the orders have been automatically canceled?
You guys all need to chill out - everything always gets sorted out. These guys are getting hundreds of orders coming in and have to confirm/verify everything. Let them do their job. 
I'm sure they will make it right, but if I miss batch 4 I'd be pissed.Further edit.
It is now:
Paid
Unshipped
Expired
Even further edit:
I now have payment confirmation Email, with it still showing expired.
Mine has also expired even with 8 confirmations.
BitMaintech.com what is going on? Are you going to refund all the payments your system is failing to acknowledge now that the orders have been automatically canceled?
BitMaintech.com what is going on? Are you going to refund all the payments your system is failing to acknowledge now that the orders have been automatically canceled?
I have a LEPA 1200W PSU, do you guys think three A3 batch 4 will work on one of these units? Is anyone running 3 off a 1000W or 1200W? Would like to hear about it if you are....
You want to run your PSU at below 90% load or 1080 watt. 3 S3s will require 1098 at a minimum. So, 3 S3s can be run with a 1200 W PSU but not recommended.
My order has gone to:
Unpaid
Unshipped
Expired
Even though I paid at order completion.
What is going on?
Unpaid
Unshipped
Expired
Even though I paid at order completion.
What is going on?
Hi,
Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?
Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?
please post your miner status page
8 confirmations but Bitmain is still showing my order is unpaid
I have a LEPA 1200W PSU, do you guys think three A3 batch 4 will work on one of these units? Is anyone running 3 off a 1000W or 1200W? Would like to hear about it if you are....
anyone have any coupon to give to me
Hi,
Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?
Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?
I have updated the info to the latest network difficulty. I will be reducing the expected network difficulty in the future to 10% from the present 20%.
Here is the shared link to all the hardware tabs.
https://docs.google.com/spreadsheet/ccc?key=0AmeuPljmUNHCdEpqX2RmMDFwemJyLURVUWFtZ3J3aGc&usp=sharing
Here is the shared link to all the hardware tabs.
https://docs.google.com/spreadsheet/ccc?key=0AmeuPljmUNHCdEpqX2RmMDFwemJyLURVUWFtZ3J3aGc&usp=sharing
Still showing 3/6 confirmations, but Bitmain just sent me an email that says my order is Paid.
What the hay.. ordered two.
Jump to: