ANTMINER S3+ Discussion and Support Thread - page 394.

Ski72

member

Activity: 84

Merit: 10

Kinex - The New Frontier

Quote from: daemonfox on July 24, 2014, 01:32:49 PM

Quote from: Stinky_Pete on July 24, 2014, 01:31:42 PM

Quote from: daemonfox on July 24, 2014, 01:29:44 PM

I placed an order for 2X Batch 4 S3s and paid in full... and my order does not show as receiving payment though the tx has confirmed many times and I have checked the address I sent it to and it is the same as in the email.

I have emailed and messaged them about this and no response.

PLEASE RESPOND I DO NOT WANT TO LOSE MY ORDER!

This often happens, it gets sorted out eventually.

I hope so... I could have ordered from Zoomhash but it is $570 a pop + shipping so... I am hoping I didn't just lose 1.3 BTC ordering direct.

When I ordered my Batch 1 S3's, it took a little while for the whole transaction to process. It'll all hash out in the end ... Cheesy

Junkbarman

full member

Activity: 168

Merit: 100

Quote from: daemonfox on July 24, 2014, 01:32:49 PM

Quote from: Stinky_Pete on July 24, 2014, 01:31:42 PM

Quote from: daemonfox on July 24, 2014, 01:29:44 PM

I placed an order for 2X Batch 4 S3s and paid in full... and my order does not show as receiving payment though the tx has confirmed many times and I have checked the address I sent it to and it is the same as in the email.

I have emailed and messaged them about this and no response.

PLEASE RESPOND I DO NOT WANT TO LOSE MY ORDER!

This often happens, it gets sorted out eventually.

I hope so... I could have ordered from Zoomhash but it is $570 a pop + shipping so... I am hoping I didn't just lose 1.3 BTC ordering direct.

With the frenzy on these boards today to buy from these guys, what makes you think you just lost your coin? I would chill until things get sorted out. Because if you can't afford to lose that money, you might not have needed to make that purchase in the first place.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: oskuro on July 24, 2014, 01:30:44 PM

Is this normal???

same on both S3. Both with default frequency: 218.75

why so many discarded??

strangely enough, yes, but SOMETIMES rebooting from the webgui (not by power cycle) helps somewhat. Also it seems that discarded shares ## are higher on ghash and btcguild than on eligius (personal observation on the same miner by rotating pools).

daemonfox

hero member

Activity: 630

Merit: 500

Quote from: Stinky_Pete on July 24, 2014, 01:31:42 PM

Quote from: daemonfox on July 24, 2014, 01:29:44 PM

I placed an order for 2X Batch 4 S3s and paid in full... and my order does not show as receiving payment though the tx has confirmed many times and I have checked the address I sent it to and it is the same as in the email.

I have emailed and messaged them about this and no response.

PLEASE RESPOND I DO NOT WANT TO LOSE MY ORDER!

This often happens, it gets sorted out eventually.

I hope so... I could have ordered from Zoomhash but it is $570 a pop + shipping so... I am hoping I didn't just lose 1.3 BTC ordering direct.

Stinky_Pete

hero member

Activity: 560

Merit: 500

Quote from: daemonfox on July 24, 2014, 01:29:44 PM

I placed an order for 2X Batch 4 S3s and paid in full... and my order does not show as receiving payment though the tx has confirmed many times and I have checked the address I sent it to and it is the same as in the email.

I have emailed and messaged them about this and no response.

PLEASE RESPOND I DO NOT WANT TO LOSE MY ORDER!

This often happens, it gets sorted out eventually.

oskuro

sr. member

Activity: 294

Merit: 251

Is this normal???

same on both S3. Both with default frequency: 218.75

why so many discarded??

daemonfox

hero member

Activity: 630

Merit: 500

I placed an order for 2X Batch 4 S3s and paid in full... and my order does not show as receiving payment though the tx has confirmed many times and I have checked the address I sent it to and it is the same as in the email.

I have emailed and messaged them about this and no response.

PLEASE RESPOND I DO NOT WANT TO LOSE MY ORDER!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: visdude on July 24, 2014, 01:15:16 PM

Quote from: Mudbankkeith on July 24, 2014, 12:51:15 PM

All we need now is the S1 upgrade kits to be announced

Then I will become a happy multi-terahash miner.

How does it work? Would it just be replacing the S1 blades with S3s on the existing S1 frames (without the shroud)? Would a fan be included in the upgrade kit since the S1 only came with one 12038 fan?

that would be nice if that controller would run an s-3 blade the beeping issue would go by by

wlefever

legendary

Activity: 1174

Merit: 1001

Quote from: TracerX on July 24, 2014, 11:44:58 AM

Quote from: wlefever on July 24, 2014, 11:39:28 AM

In the same boat. Hoping for the same outcome

This happens every time BM launches a new product, and always has. It will sort out for everyone who paid, as it does every time. If it's not automatically fixed in 24 hours, shoot BM an email with your order number and the TXID of your payment and they will manually fix it, although I've only seen someone need to do this once in thousands of orders.

Cool. thanks!

Moria843

sr. member

Activity: 442

Merit: 250

Found Lost beach - quiet now

Quote from: Ilan1 on July 24, 2014, 09:41:28 AM

I am getting board now, going to make a cup of tea! Grin

Are you getting an S3 board! I didn't know the kits were out yet Grin

visdude

legendary

Activity: 1081

Merit: 1001

Quote from: Mudbankkeith on July 24, 2014, 12:51:15 PM

All we need now is the S1 upgrade kits to be announced

Then I will become a happy multi-terahash miner.

How does it work? Would it just be replacing the S1 blades with S3s on the existing S1 frames (without the shroud)? Would a fan be included in the upgrade kit since the S1 only came with one 12038 fan?

oskuro

sr. member

Activity: 294

Merit: 251

Quote from: visdude on July 24, 2014, 01:06:04 PM

Quote from: oskuro on July 24, 2014, 12:38:37 PM

pics and GH/s temperatures etc(s3 are in a room, i will move em to a colder area so dont really worry about temperatures):

I hope you eventually powered up the other blade.

yeah i did that picture was a previous one xD

2 more S3 ordered from Batch 4...

sang

sr. member

Activity: 282

Merit: 250

Buying 2 coupons - please PM

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

My batch 4 s-3 order is marked as paid in full. Looking forward to more of them.

not.you

legendary

Activity: 1726

Merit: 1018

Quote from: bitcoin4-sale.com on July 24, 2014, 12:44:51 PM

Quote from: iglasses on July 24, 2014, 11:54:37 AM

Quote from: bitcoin4-sale.com on July 24, 2014, 11:44:20 AM

Quote from: jpchrist on July 24, 2014, 10:58:52 AM

Quote from: bitcoin4-sale.com on July 24, 2014, 10:45:09 AM

Hi,

Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?

please post your miner status page

Here are my miner stats

Something is off with chain 2. I've never seen that with the -o and it should be 16 not 32. What happens if you swap the PCI-e connector? If they chains swap info I'd say you have a PSU problem. If they stay the same I would think it's the miner.

The chains stayed the same. I plugged in my second miner and it actually works the way it is supposed to. I switched the PCI-e's to the other two and everything stayed the same with the ASIC. Hooked up the 2nd PSU to the broken miner and still the same problem.

Open it up (5 screws on each side, total piece of cake) and reseat the connector ribbons from the blades to the control board. If you still have the issue you may have one of the blades that is swimming in thermal paste in which case you will need to take off the heatsink (4 screws, not too hard to do but you have to also disconnect the fan because the heatsink has to slide up after you pull it away from the board) and clean up the chips. Or it could just be a bad blade and you will need to talk to Bitmain about a replacement.

visdude

legendary

Activity: 1081

Merit: 1001

Quote from: oskuro on July 24, 2014, 12:38:37 PM

pics and GH/s temperatures etc(s3 are in a room, i will move em to a colder area so dont really worry about temperatures):

I hope you eventually powered up the other blade.

Biodom

legendary

Activity: 3892

Merit: 4331

I have four 0.075BTC coupons and two 0.074 coupons.
Anybody wants all four (I think that I can only donate all at once)?
minimal fair price is 0.23 for all four (your savings would be 0.3-0.23=0.07 BTC)
If you want two (apparently, it is possible), then the cost is 0.1155 BTC
pm me, but i won't accept anything less than 0.23 for all four or 0.1155BTC for two
two 0.074 I will get rid of ONLY if price is even higher

Mudbankkeith

hero member

Activity: 868

Merit: 1000

All we need now is the S1 upgrade kits to be announced

Then I will become a happy multi-terahash miner.

Mudbankkeith

hero member

Activity: 868

Merit: 1000

Quote from: TravelingMiner on July 24, 2014, 12:45:41 PM

I requested 10% coupons on my order of 6, and they still haven't processed even though my miners are shipping right now. I wanted to buy another from batch 4, but with coupons.

Also, I have some EVGA 1300watt gold PSUs I'm going to use to power 3 on each. 1050 watts (which someone else said is what they get from the wall) is about 80% of 1300. So I should be good hopefully. Grin

I'm still a bit sad that my order was going to be delivered next week, but I had to move it since I'm going to be out of town... Valuable mining time lost Sad

My 10% coupons were processed earlier today. keep watching the site.

TravelingMiner

newbie

Activity: 3

Merit: 0

I requested 10% coupons on my order of 6, and they still haven't processed even though my miners are shipping right now. I wanted to buy another from batch 4, but with coupons.

Also, I have some EVGA 1300watt gold PSUs I'm going to use to power 3 on each. 1050 watts (which someone else said is what they get from the wall) is about 80% of 1300. So I should be good hopefully. Grin

I'm still a bit sad that my order was going to be delivered next week, but I had to move it since I'm going to be out of town... Valuable mining time lost Sad

Topic: ANTMINER S3+ Discussion and Support Thread - page 394. (Read 710164 times)