ANTMINER S3+ Discussion and Support Thread - page 444.

Trammel

newbie

Activity: 47

Merit: 0

Quote from: tzortz on July 19, 2014, 05:51:24 AM

I had one of the 20 pieces damaged:

If I were you I would login to your Bitmain accounts and send a post-sales message with your images, and ask if they will send you some replacement fans. Otherwise, buy a replacement fan and ask them to refund you the cost of the replacement. It's quite easy to replace the fan. Perhaps, before you send a message to bitmain, take cover off and take off the replacement fan (you need cover off to un-plug the fan from the mainboard), and see if the S3 powers up and runs albeit without the broken fan. If it does work (hope it does) then you know its just a replacement fan that's required otherwise its a complete S3 replacement.

Lowell904

member

Activity: 119

Merit: 10

Quote from: -droid- on July 19, 2014, 05:55:17 AM

Wow, so those of us who paid for batch 1 prices towards the end got screwed as essentially there is no difference between late batch 1 and early batch 2 since they are being shipped at the same time

Seems like it. We will have to see if they were able to improve the hash rate on the miners, over that time. I would still be happy if I got the 7.7% refund and 2 miners that pull 470 gh/s each.

-droid-

legendary

Activity: 1050

Merit: 1001

Wow, so those of us who paid for batch 1 prices towards the end got screwed as essentially there is no difference between late batch 1 and early batch 2 since they are being shipped at the same time

Lowell904

member

Activity: 119

Merit: 10

Hooray. Bitmain is showing my B1 order as shipped now. Ups has not picked it up yet, but the label is printed.

I'm hoping the extra wait was worth it. Like they fixed some of the issues, we will see.

tzortz

hero member

Activity: 728

Merit: 500

This is 3 days ago:

I had one of the 20 pieces damaged:

vulgartrendkill

hero member

Activity: 518

Merit: 500

Does anyone know what I should put in the "use custom DNS server" box?

Should I leave it blank?

ck

newbie

Activity: 36

Merit: 0

Am from B2 (think I missed B1 and got into B2 early) status in Bitmain has changed to shipped about 6 hours ago, and UPS shows that it is en route to pick up the shipment.

Good times thanks Bitmain Grin

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: ducmami on July 19, 2014, 05:42:55 AM

Quote from: allcoinminer on July 19, 2014, 04:26:11 AM

Can anyone explain the below image?
Its from UPS tracking.

i think perhaps customs in your country do not accept import that and item must be return

The funny thing is 1 miner is Held in Warehouse of UPS and the other one gone to Indonasia.
Both of them is part of one order and shipped in the same tracking number.
Wonder how one miner gone to a different country when both are of same shipment tracking id.

ducmami

full member

Activity: 121

Merit: 100

Quote from: allcoinminer on July 19, 2014, 04:26:11 AM

Can anyone explain the below image?
Its from UPS tracking.

i think perhaps customs in your country do not accept import that and item must be return

1Neptune

sr. member

Activity: 241

Merit: 250

Quote from: Trammel on July 19, 2014, 04:07:35 AM

Quote from: 1Neptune on July 19, 2014, 04:00:45 AM

Quote from: kp5995 on July 19, 2014, 03:49:45 AM

My order, which was placed 6/30 in the 21:00 hour, now shows up on the UPS reference page.. Should be here in NY on tues.

My batch 2 order after a search by reference on UPS site that the label has been created, bitmain site's order info hasn't been updated yet.
2014-07-01 20:45:32 - order created
2014-07-01 20:52:16 - order paid

So they're starting to ship batch 2 orders. Great!

How did you manage to locate your order being registered with UPS?

Use their "track by reference" function and use your bitmain order number as the reference. Select the dates, destination country and zip code (if in the U.S.) and UPS's system will search based on the order number as given by bitmaintech.com .

Bitskint

member

Activity: 79

Merit: 10

***BATCH 2***

Pay    1.48 BTC
Pay Confirm    1.48 BTC
Date    2014-07-01 16:36:59

Got the following on UPS :-

A UPS shipping label has been created. Once the shipment arrives at our facility, the tracking status--including the scheduled delivery date--will be updated.

Label Created On:
07/19/2014

Bitmain says unshipped still

Waited quietly without spamming -- and they are on their way.

Thank you BITMAIN

R4v37

sr. member

Activity: 266

Merit: 250

Quote from: Datto on July 19, 2014, 04:13:20 AM

BEEPING so annoying
I understand it maybe HW errors or Loss of connections
I have set the Beeping to False under miner config
But still beeping
Anyone got a solution ??

dont use wifi
if you have to, and must, then place ur wifi router as close as possible with ur miners
and make sure it wont lose connection even a milisecond..
u know... miners also sensitive if not connected to internet Grin

Collider

hero member

Activity: 714

Merit: 500

Quote from: bitspender on July 19, 2014, 04:30:09 AM

How much for the avg import duties? I ended up paying 88€ per box

It is your countries´ vat rate plus 12€ for UPS (per shipment).

bitspender

hero member

Activity: 658

Merit: 500

How much for the avg import duties? I ended up paying 88€ per box

Hunterbunter

hero member

Activity: 994

Merit: 1000

Quote from: allcoinminer on July 19, 2014, 04:26:11 AM

Can anyone explain the below image?
Its from UPS tracking.

Looks like it was halted in Indonesia and sent it back to China

allcoinminer

hero member

Activity: 784

Merit: 504

Can anyone explain the below image?
Its from UPS tracking.

TheFridge

sr. member

Activity: 252

Merit: 250

Yer that beeping is really really annoying. Is everyone else having the issue?

Datto

full member

Activity: 140

Merit: 100

Quote from: allcoinminer on July 19, 2014, 04:16:20 AM

Quote from: Datto on July 19, 2014, 04:13:20 AM

BEEPING so annoying
I understand it maybe HW errors or Loss of connections
I have set the Beeping to False under miner config
But still beeping
Anyone got a solution ??

Have you restarted it after disabling the beep?
Try a power cycle too. The S3 seems a bit problematic both in shipping & hashing.
After all, I will see this Antminer S3 as a partially faulty device.

Yes have powered cycle and reboot
tried everything to my knowledge
Hoping someone here found a solution to this annoying BEEP !

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: Datto on July 19, 2014, 04:13:20 AM

BEEPING so annoying
I understand it maybe HW errors or Loss of connections
I have set the Beeping to False under miner config
But still beeping
Anyone got a solution ??

Have you restarted it after disabling the beep?
Try a power cycle too. The S3 seems a bit problematic both in shipping & hashing.
After all, I will see this Antminer S3 as a partially faulty device.

Datto

full member

Activity: 140

Merit: 100

BEEPING so annoying
I understand it maybe HW errors or Loss of connections
I have set the Beeping to False under miner config
But still beeping
Anyone got a solution ??

Topic: ANTMINER S3+ Discussion and Support Thread - page 444. (Read 710164 times)