Pages:
Author

Topic: ANTMINER S3+ Discussion and Support Thread - page 74. (Read 710164 times)

sr. member
Activity: 392
Merit: 250
man I hope all the mining farms go belly up more for us!!!!

I use a online wallet maybe I should cash out so I don't lose my coins. I don't know how to setup a wallet on my PC "offline wallet" and would not trust it anyway any trustable offline wallets other than bitcoinQT Huh



sr. member
Activity: 442
Merit: 250
Found Lost beach - quiet now
Every month when I get my power bill I look at cost of electricity to mine and value of bitcoins mined during the same period. When it cost more in electricity than value of BTC I'm going to shut down. I guess if enough of us do then difficulty will go down.
You are looking at it from the wrong perspective. You need to be wishing for the big players to call it a day, that way there is a chance for bitcoin difficulty reduction that is sustainable. The home miners do not account for a large enough percentage to "shut down" in concert to cause a difficulty reduction that is sustainable. Its those huge corporate farms, the same ones dumping BTC thus responsible for the downward pressure on BTC value that need to shut down. If you are signed up to a collective, pray, if not then get your witches' broom out for them!

They're doing the same thing. CEX.IO has already stopped. Maybe you're right, if enough big players stop mining. They usually have an advantage with lower power cost, but we have the advantage with lower maintenance cost (since most of us do ourselves as a hobby).
hero member
Activity: 518
Merit: 500
Every month when I get my power bill I look at cost of electricity to mine and value of bitcoins mined during the same period. When it cost more in electricity than value of BTC I'm going to shut down. I guess if enough of us do then difficulty will go down.
You are looking at it from the wrong perspective. You need to be wishing for the big players to call it a day, that way there is a chance for bitcoin difficulty reduction that is sustainable. The home miners do not account for a large enough percentage to "shut down" in concert to cause a difficulty reduction that is sustainable. Its those huge corporate farms, the same ones dumping BTC thus responsible for the downward pressure on BTC value that need to shut down. If you are signed up to a collective, pray, if not then get your witches' broom out for them!
sr. member
Activity: 442
Merit: 250
Found Lost beach - quiet now
Every month when I get my power bill I look at cost of electricity to mine and value of bitcoins mined during the same period. When it cost more in electricity than value of BTC I'm going to shut down. I guess if enough of us do then difficulty will go down.
hero member
Activity: 518
Merit: 500
I keep getting a XML error everytime I try to access the miner configuration page... I'm running the october firmware, already tried to reset it but it's still the same. I don't get this error with any other firmware but want to keep this one as it seem to be the most stable for me.

Any ideas on how to fix this?
Log into the rig via SSH and paste this then press enter

Code:
sed -i 's/Save\&Apply/Save\&Apply/g' /usr/lib/lua/luci/model/cbi/cgminer/cgminer.lua

Now you should be able to access the miner configuration page.
PS. That was the minor bug that led to the ensuing cascading firmware update shenanigans!
newbie
Activity: 29
Merit: 0
I keep getting a XML error everytime I try to access the miner configuration page... I'm running the october firmware, already tried to reset it but it's still the same. I don't get this error with any other firmware but want to keep this one as it seem to be the most stable for me.

Any ideas on how to fix this?
legendary
Activity: 966
Merit: 1003
^^^ that thing does not have enough amperage to power two blades. Bitmain spec is nearly 14 Amps at 12 volts PER BLADE. The PSU, you link to, will MAX OUT  at 23 Amps total.

14 Amps for an S3?
Is that correct?

I have 3, S3s running off an EVGA 1000 which is on a 120 VAC 20 AMP breaker
I wonder why that breaker hasn't tripped...
I better take one of them off while I check this a little further.
14*3 = 42 AMPS, no way I am doubling the capacity of that breaker.

Your breaker's rating is based on the 120 volt input. In terms of amps it is far less than the output amps at 12 volts.
That's correct. 14Amps@12Volts "PER BLADE"...each S3 has TWO blades. If you have 3 x S3's then your PSU will need to provide 28Amps per S3 x 3= 84amps@12Volts DC. This is where efficiency ratings of the PSU become important as well. Your PSU should have a label which states the max it will draw from the wall @ 110/220 Volts AC, I believe yours is likely around 15Amps. Just remember that Bitmains ratings are just that Ratings and your actual usage should be close but.......
hero member
Activity: 700
Merit: 501
https://bitcointalk.org/index.php?topic=905210.msg
^^^ that thing does not have enough amperage to power two blades. Bitmain spec is nearly 14 Amps at 12 volts PER BLADE. The PSU, you link to, will MAX OUT  at 23 Amps total.

14 Amps for an S3?
Is that correct?

I have 3, S3s running off an EVGA 1000 which is on a 120 VAC 20 AMP breaker
I wonder why that breaker hasn't tripped...
I better take one of them off while I check this a little further.
14*3 = 42 AMPS, no way I am doubling the capacity of that breaker.

Your breaker's rating is based on the 120 volt input. In terms of amps it is far less than the output amps at 12 volts.

What is more realistic?
I am moving everything to 240, but I would like to have a better idea all the way around?
S3 and S4?, may as well tell me S5 if I am going to buy one Smiley
legendary
Activity: 1246
Merit: 1024
^^^ that thing does not have enough amperage to power two blades. Bitmain spec is nearly 14 Amps at 12 volts PER BLADE. The PSU, you link to, will MAX OUT  at 23 Amps total.

14 Amps for an S3?
Is that correct?

I have 3, S3s running off an EVGA 1000 which is on a 120 VAC 20 AMP breaker
I wonder why that breaker hasn't tripped...
I better take one of them off while I check this a little further.
14*3 = 42 AMPS, no way I am doubling the capacity of that breaker.

Your breaker's rating is based on the 120 volt input. In terms of amps it is far less than the output amps at 12 volts.
hero member
Activity: 700
Merit: 501
https://bitcointalk.org/index.php?topic=905210.msg
^^^ that thing does not have enough amperage to power two blades. Bitmain spec is nearly 14 Amps at 12 volts PER BLADE. The PSU, you link to, will MAX OUT  at 23 Amps total.

14 Amps for an S3?
Is that correct?

I have 3, S3s running off an EVGA 1000 which is on a 120 VAC 20 AMP breaker
I wonder why that breaker hasn't tripped...
I better take one of them off while I check this a little further.
14*3 = 42 AMPS, no way I am doubling the capacity of that breaker.
donator
Activity: 792
Merit: 510
ouch...  Bye bye $250.....   Cry

See you soon @ $1,000 range again!!!  in my dream...  Grin
sr. member
Activity: 392
Merit: 250
And now back down to $190 USD!!!!

legendary
Activity: 966
Merit: 1003
oh my god 1 BTC=184.2 USD I think I am getting real sick!!!!!

This was it at the time of this post. I QUIT!!!!



http://preev.com        Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed
Annnd.... 30 minutes later its back above $205.
sr. member
Activity: 392
Merit: 250
oh my god 1 BTC=184.2 USD I think I am getting real sick!!!!!

This was it at the time of this post. I QUIT!!!!



http://preev.com        Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed Embarrassed
legendary
Activity: 1736
Merit: 1006
Want to see a good Joke!!!


https://bitmaintech.com/productDetail.htm?pid=00020150113072354545V0QVLrSw06A5

this is what I meant about rich powerful companies pushing us home miners right out the door!!!!

corporate greed I guess.

or JUST PLAIN GREED!!


DECENTRALIZED MARKET RIGHT FOR WHO!!! LOL LOL LOL

Quote

Market will be closed when the maintenance fee equals to the mining revenue. And then terminate service after reserving the hardware for 10 days

Due to the aging of actual miners, the quality and hashrate of miners delivered to users are not guaranteed

Sounds like a sweet deal  Huh

it might not be such a bad deal. basically unlike cloud hash where you purchase ghs directly, they are offering to plug in YOUR s4 that you purchase (used i assume) and direct it to the pool with your username.

they cant guarantee hash rate, because each s4 is slightly different. altho it looks like if your used s4 fails in their possession, they will replace it.

it also looks like when the fee is higher then the payout, they offer to mail it to you. which unfortunately probably wont take very long.

member
Activity: 112
Merit: 10
Want to see a good Joke!!!


https://bitmaintech.com/productDetail.htm?pid=00020150113072354545V0QVLrSw06A5

this is what I meant about rich powerful companies pushing us home miners right out the door!!!!

corporate greed I guess.

or JUST PLAIN GREED!!


DECENTRALIZED MARKET RIGHT FOR WHO!!! LOL LOL LOL

Quote

Market will be closed when the maintenance fee equals to the mining revenue. And then terminate service after reserving the hardware for 10 days

Due to the aging of actual miners, the quality and hashrate of miners delivered to users are not guaranteed

Sounds like a sweet deal  Huh

yup, I'll take 1000! ... and may as well throw in a Bridge or Clock Tower.
legendary
Activity: 1736
Merit: 1006
Want to see a good Joke!!!


https://bitmaintech.com/productDetail.htm?pid=00020150113072354545V0QVLrSw06A5

this is what I meant about rich powerful companies pushing us home miners right out the door!!!!

corporate greed I guess.

or JUST PLAIN GREED!!


DECENTRALIZED MARKET RIGHT FOR WHO!!! LOL LOL LOL



 

its ok, with the dropping price of bitcoin, these larger mining companies are going to pull the plug soon.
this will drop difficulty and let the smaller home miners make more bitcoin.
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
I just cant seem to program a static IP when I try to log in to the new STATIC ip it says PAGE NOT FOUND like its not finding the web UI

Also what is that little black button do by the SD card slot and can you put a SD card in it I don't know just got it that's why I am wondering Huh??

Man the fan is real load to load its sounds like the miner is ready for takeoff like a boing 747 starting up!!!!

Also cant put S3 fans on it either fan cable to short if I get an extender will it work they look way different Huh?


You can get a quasi static IP by setting that device to always use the same IP via your router. Its like fixed DHCP.

SD card slot on an S3? If you mean S5, I don't see what button you're referring to. The SD card slot is not used.
legendary
Activity: 1258
Merit: 1027
Want to see a good Joke!!!


https://bitmaintech.com/productDetail.htm?pid=00020150113072354545V0QVLrSw06A5

this is what I meant about rich powerful companies pushing us home miners right out the door!!!!

corporate greed I guess.

or JUST PLAIN GREED!!


DECENTRALIZED MARKET RIGHT FOR WHO!!! LOL LOL LOL

Quote

Market will be closed when the maintenance fee equals to the mining revenue. And then terminate service after reserving the hardware for 10 days

Due to the aging of actual miners, the quality and hashrate of miners delivered to users are not guaranteed

Sounds like a sweet deal  Huh
sr. member
Activity: 392
Merit: 250
Want to see a good Joke!!!


https://bitmaintech.com/productDetail.htm?pid=00020150113072354545V0QVLrSw06A5

this is what I meant about rich powerful companies pushing us home miners right out the door!!!!

corporate greed I guess.

or JUST PLAIN GREED!!


DECENTRALIZED MARKET RIGHT FOR WHO!!! LOL LOL LOL



 
Pages:
Jump to: