Topic: ANTMINER S3+ Discussion and Support Thread - page 80. (Read 710164 times)
I have two S3's and if they run long enough one comes up with an "-" and the other an "x". Rebooting doesn't clear these but if I shut down and let sit for a minute then restart both, both come up all"o"'s. Always the same ASIC on each. It can't be temperature as with windows open the room was 42°.
My S3s still got antMiner_S320140826 firmware with ckolivas' antminer/s3/4.6.0-140908 fix and have been hashing around 490 GH/s at 243.75M since then.
If it ain't broke, don't fix it.
https://bitcointalksearch.org/topic/m.8471571
let me get 1216 fw
I think no, first time I got XML errors.. I even unchecked save the first time, didn't help. second time I saved settings.
when you flashed the January firmware twice in a row did you get all those HD ERRORS after re-flashing second time ? yes no ?
finally running 0103 my S3+ is running correctly. 2 bugs on it, one is the Web interface reboot needed every time. Bug number 2 was I had to apply the firmware twice.
when you flashed the January firmware twice in a row did you get all those HD ERRORS after re-flashing second time ? yes no ?
Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.
Hfan Fans
1740 1740 1380
1560 1560 1200
1860 1860 1620
1500 1500 1320
1740 1740 1500
7140 4260 7140
9300 7200 9300
8460 8460 6240
9480 7500 9480
8940 8700 8940
10500 7080 10500
Hfan Fans
1740 1740 1380
1560 1560 1200
1860 1860 1620
1500 1500 1320
1740 1740 1500
7140 4260 7140
9300 7200 9300
8460 8460 6240
9480 7500 9480
8940 8700 8940
10500 7080 10500
What do you mean? What is that data?
It is the fan data from my S3's pages.
Why are there 3 columns though, that's what I'm asking.
finally running 0103 my S3+ is running correctly. 2 bugs on it, one is the Web interface reboot needed every time. Bug number 2 was I had to apply the firmware twice.
when you flashed the January firmware twice in a row did you get all those HD ERRORS after re-flashing second time ? yes no ?
upload 12.16 firmware for me
Don't quote me I did not get me S5 yet still waiting for S***MAIN to ship it on the 8th but it looks like the control board takes a s card 
?
Would anybody know?
? Would anybody know
?
finally running 0103 my S3+ is running correctly. 2 bugs on it, one is the Web interface reboot needed every time. Bug number 2 was I had to apply the firmware twice.
burned one driver control two chips, how to turn off outside the chip on the board, so they do not interfere with the rest of the work. thank you.
control board can operate without damaging two BM1382. I would like to remove them, so I bought one S3 non-working board for half price. that it is necessary unsolder?
duplicate of topics - https://bitcointalksearch.org/topic/m.10066563. please help.
control board can operate without damaging two BM1382. I would like to remove them, so I bought one S3 non-working board for half price. that it is necessary unsolder?
duplicate of topics - https://bitcointalksearch.org/topic/m.10066563. please help.
Severely Overclocked Board wow !!!!!!!
But then again that's Bitmain quality lately lol lol lol
why does it say free ocean shipping but still showing a total for shipping?
um i think the free shipping on the s3+s were if you buy all 500 of them.
why does it say free ocean shipping but still showing a total for shipping?
upload or pm me the 12.16 firmware 01.03 is absolutely terrible hwe is .01+ compared to .0001 before
voltage doesnt seem to have much affect anymore on hwe like before
voltage doesnt seem to have much affect anymore on hwe like before
burned one driver control two chips, how to turn off outside the chip on the board, so they do not interfere with the rest of the work. thank you.
control board can operate without damaging two BM1382. I would like to remove them, so I bought one S3 non-working board for half price. that it is necessary unsolder?
duplicate of topics - https://bitcointalksearch.org/topic/m.10066563. please help.
control board can operate without damaging two BM1382. I would like to remove them, so I bought one S3 non-working board for half price. that it is necessary unsolder?
duplicate of topics - https://bitcointalksearch.org/topic/m.10066563. please help.
HW errors are way off the scale with JAN Firmware. I switched Back to the DEC-19 firmware now I have 0 HW errors !!!!!
There is something wrong with the JAN firmware thanks BITMAIN !!!!
There is something wrong with the JAN firmware thanks BITMAIN !!!!
Anybody know a good link to get 8 pin PCI-E to 6 PIN PCI-E adaptors with a good heavy gauge wire ?
Sorry that's its off topic.
Sorry that's its off topic.
they dropped the s3 to 150$ but they are way overpriced...
so are the s5's
this makes me sad because i really like bitmain. The best value right now is the 3 spondoolies sp20's for 1495 w/free shipping.
Please bitmain lower prices so we can make more money
so are the s5's
this makes me sad because i really like bitmain. The best value right now is the 3 spondoolies sp20's for 1495 w/free shipping.
Please bitmain lower prices so we can make more money
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been
The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks.
According to the change log, not much that should break things.
Yea right Dogie.
0103 firmware seems the most stable so far, good hash rate through 25 hours poolside and miner
whats your HWE%?
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been
The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks.
According to the change log, not much that should break things.
Yea right Dogie.
0103 firmware seems the most stable so far, good hash rate through 25 hours poolside and miner
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been
The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks.
According to the change log, not much that should break things.
Yea right Dogie.
Jump to: