ANTMINER S3+ Discussion and Support Thread - page 81.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Quote from: dogie on January 06, 2015, 06:58:13 PM

Quote from: daddyfatsax on January 06, 2015, 04:37:36 PM

Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.

Hfan Fans
1740   1740 1380
1560   1560 1200
1860   1860 1620
1500   1500 1320
1740   1740 1500
7140   4260 7140
9300   7200 9300
8460   8460 6240
9480   7500 9480
8940   8700 8940
10500 7080 10500

What do you mean? What is that data?

It is the fan data from my S3's pages.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: Darthswan on January 06, 2015, 09:35:43 AM

Quote from: dogie on January 06, 2015, 08:23:58 AM

Quote from: aarons6 on January 06, 2015, 06:12:03 AM

i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been Sad

Quote from: dog1965 on January 06, 2015, 06:31:06 AM

The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!

Reported to engineers, thanks.

What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one.

never tried the 12/16 one, but i have 12/19 and 01/03.
the 10/24 one seems best for me. the 12/19 was ok, lower rejects but also slightly lower hash avg but they lost connection every few hours, beeped and rebooted.

oh and for the very first time since i owned the s3s, on the 12/19 rom, i had a - on one of the chips.. that kept coming back after a reboot.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: Darthswan on January 06, 2015, 09:35:43 AM

Quote from: dogie on January 06, 2015, 08:23:58 AM

Quote from: aarons6 on January 06, 2015, 06:12:03 AM

i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been Sad

Quote from: dog1965 on January 06, 2015, 06:31:06 AM

The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!

Reported to engineers, thanks.

What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one.

According to the change log, not much that should break things.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: daddyfatsax on January 06, 2015, 04:37:36 PM

Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.

Hfan Fans
1740   1740 1380
1560   1560 1200
1860   1860 1620
1500   1500 1320
1740   1740 1500
7140   4260 7140
9300   7200 9300
8460   8460 6240
9480   7500 9480
8940   8700 8940
10500 7080 10500

What do you mean? What is that data?

mrpark

sr. member

Activity: 364

Merit: 250

OK, I did that and it worked. So what you are telling me, you can't just power up a S3+ miner, you have to go in and reboot it from the web interface. I find it surprising because this is the newest and greatest firmware. Is there a list of bugs somewhere? How is the average miner supposed to know all these things?

Quote from: aclass on January 06, 2015, 09:58:58 AM

This is a bug. Reboot from the web gui and check again

Quote from: mrpark on January 06, 2015, 09:52:40 AM

What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here...

Quote from: Darthswan on January 05, 2015, 05:24:53 PM

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.

Hfan Fans
1740   1740 1380
1560   1560 1200
1860   1860 1620
1500   1500 1320
1740   1740 1500
7140   4260 7140
9300   7200 9300
8460   8460 6240
9480   7500 9480
8940   8700 8940
10500 7080 10500

aclass

sr. member

Activity: 381

Merit: 251

This is a bug. Reboot from the web gui and check again

Quote from: mrpark on January 06, 2015, 09:52:40 AM

What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here...

Quote from: Darthswan on January 05, 2015, 05:24:53 PM

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

mrpark

sr. member

Activity: 364

Merit: 250

What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here...

Quote from: Darthswan on January 05, 2015, 05:24:53 PM

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

Darthswan

hero member

Activity: 818

Merit: 508

Quote from: dogie on January 06, 2015, 08:23:58 AM

Quote from: aarons6 on January 06, 2015, 06:12:03 AM

i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been Sad

Quote from: dog1965 on January 06, 2015, 06:31:06 AM

The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!

Reported to engineers, thanks.

What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one.

dog1965

sr. member

Activity: 392

Merit: 250

Again this is the amount of hardware errors after Just two hours!!!!!!

With the DEC-19 Version the one with the so called mistake I never got any I am really starting to hate BITMAIN!!!!

why don't they make a miner that's pc controlled instead of having a built in controller and you can mine any coin with it!!!!

Or at least run cgminer on pc instead!!!!!

Embarrassed

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: aarons6 on January 06, 2015, 06:12:03 AM

i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been Sad

Quote from: dog1965 on January 06, 2015, 06:31:06 AM

The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!

Reported to engineers, thanks.

dog1965

sr. member

Activity: 392

Merit: 250

The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!

Anybody have any ideas to fix it with this firmware other wise I am going back to 12/19 !!!!

aarons6

legendary

Activity: 1736

Merit: 1006

i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been Sad

its never been above .002 and its been about 3 hours and already at .01 and rising.

so far i think the best firmware ive had was the 1024 firmware, but its no longer on the site.

Darthswan

hero member

Activity: 818

Merit: 508

Quote from: smilingloki on January 06, 2015, 12:13:18 AM

Quote from: Darthswan on January 05, 2015, 05:24:53 PM

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

OMG! Thank you thank you thank you Darthswan! - that firmware is stable as !

Glad I was able to assist. They need to take that fw and make it the standard.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: CoinMint on January 06, 2015, 03:23:10 AM

Is it just me or is the Antminer S3+ loaded with malware? Seems like the OpenWRT BarrierBreaker software sure does have a lot of network spying related software installed....

I can't even get it to upgrade to the latest firmware after attempting to update the firmware 20+ times from Mac OS X & Windows 7...

Is there anyway to update it via SSH?

never had any problems, sure its not your web browser thats infected?

CoinMint

newbie

Activity: 17

Merit: 0

Is it just me or is the Antminer S3+ loaded with malware? Seems like the OpenWRT BarrierBreaker software sure does have a lot of network spying related software installed....

I can't even get it to upgrade to the latest firmware after attempting to update the firmware 20+ times from Mac OS X & Windows 7...

Is there anyway to update it via SSH?

dishamain

newbie

Activity: 23

Merit: 0

i have a problem i my controller board the controller board is working fine in other miner which S3+ but the controller board i m working with is not working in S3 miner please help me i have below problem

http://i60.tinypic.com/2ql5xzt.jpg

smilingloki

member

Activity: 73

Merit: 10

Quote from: Darthswan on January 05, 2015, 05:24:53 PM

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

OMG! Thank you thank you thank you Darthswan! - that firmware is stable as !

Darthswan

hero member

Activity: 818

Merit: 508

Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.

mrpark

sr. member

Activity: 364

Merit: 250

It's hashing better now 435 and 400 Average, not great but good enough for right now. Not what an s3+ should hash at, but at least is not 200 anymore, thanks....

Quote from: dog1965 on January 05, 2015, 03:21:51 PM

oh no not again new firmware again how many times are we going to have to re-flash until the EPROM Burns out. I think its the voltage setting of 0000 is what they fixed ?

Topic: ANTMINER S3+ Discussion and Support Thread - page 81. (Read 710164 times)