Antminer S3 Overclocking, what's your results ?

whonesta

sr. member

Activity: 379

Merit: 250

Quote from: xjack on August 19, 2014, 08:20:03 PM

Batch 3
428 @ 212
440 @ 219
452 @ 225
453 @ 225

Batch 5
515 @ 256
440 @ 219
504 @ 250
466 @ 231

what are the code settings for 256? been using 243.75 and it runs well on a few, but then others are doing gr8 @ 250. I would like to bump them up to 256 to see if they can take it.

edit found them :
#option 'freq_value' '1406' #256.25M
#option 'chip_freq' '256.25'
#option 'timeout' '15'

WOW ton of errors @ 256.25 & 262.5 back to 250 ;(

xjack

hero member

Activity: 539

Merit: 500

Batch 3
428 @ 212
440 @ 219
452 @ 225
453 @ 225

Batch 5
515 @ 256
440 @ 219
504 @ 250
466 @ 231

leotheminer

newbie

Activity: 56

Merit: 0

All four batch 5's. #96 started getting X's at 238. Others started at 250. Not sure why the huge difference in fan speeds. They're all in a row with about 8 inches between them.

https://i.imgur.com/luFDfTX.png

FeodoroAndy

newbie

Activity: 57

Merit: 0

Nice little statistics you got here, so basically bigger batch number= better overclocability ?

iko

newbie

Activity: 1

Merit: 0

I think I've been really lucky with my batch 6 S3 Grin

https://i.imgur.com/f36AhPo.png

https://i.imgur.com/4OMzEAs.png

crazyates

legendary

Activity: 952

Merit: 1000

B6: Most of them are 238, with a few making it to 250.

ValadisBS

newbie

Activity: 6

Merit: 0

ty mate

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: ValadisBS on August 12, 2014, 05:07:56 PM

could you plz upload the settings Huh

https://bitcointalksearch.org/topic/bitmain-antminer-s3-support-and-overclocking-thread-699064

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: squashpile on August 12, 2014, 09:19:31 PM

More HW errors than accepted shares lol
Stales off the chart too, but that could have been something else. 3%+ over 225 and less than .1% at 225. Temps 38 or below. Let me know if you think I'm nuts and I'll crank them. No X's at any frequencies. I'm going for accepted shares.

Quote from: philipma1957 on August 12, 2014, 05:31:00 PM

Quote from: squashpile on August 12, 2014, 05:20:23 PM

225 is best I can do and keep HW errors acceptable on two B4 units. No X's, just too high % of HW errors for me.

and what is too high?

you are correct 3% is too high. try my new 231.25 number

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Seems people have he best luck with 250 on B5 which all mine are but I'm gonna run 237.5 on each for 24hrs to see what happens and i all goes well, I'll do 250 on by one or not at all depending on hash figures.

grn

sr. member

Activity: 357

Merit: 252

B1, 444 ghs @ 218.75
~~B1, 486 @ 250~~ B1, 494 @ 243.75

B4, 471 @ 237.5
b4, 455 @ 225

B5, 471 @ 225
B5, 503 @ 250

squashpile

full member

Activity: 125

Merit: 100

More HW errors than accepted shares lol
Stales off the chart too, but that could have been something else. 3%+ over 225 and less than .1% at 225. Temps 38 or below. Let me know if you think I'm nuts and I'll crank them. No X's at any frequencies. I'm going for accepted shares.

Quote from: philipma1957 on August 12, 2014, 05:31:00 PM

Quote from: squashpile on August 12, 2014, 05:20:23 PM

225 is best I can do and keep HW errors acceptable on two B4 units. No X's, just too high % of HW errors for me.

and what is too high?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: MoreBloodWine on August 12, 2014, 08:41:23 PM

I'm surprised some of are doing good at 250. I'll definitely have to try on of my B5's at 250. As of now, I haven tried any OC'ing yet.

I have found 2 new freq's that work I will test 243.75 on both for 2 days.

231.25

243.75

option 'freq_value' '1306' #243.75M
option 'chip_freq' '243.75'
option 'timeout' '16'

option 'freq_value' '1206' #231.25M
option 'chip_freq' '231.25'
option 'timeout' '17'

both extra ones to try.

so we have

250
243.75
237.50
231.25
225
218.75 > stock should do 441gh
212.5
206.25
200

errors look high on one I will let it run tonight to see.

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

I'm surprised some of are doing good at 250. I'll definitely have to try on of my B5's at 250. As of now, I haven tried any OC'ing yet.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: squashpile on August 12, 2014, 05:20:23 PM

225 is best I can do and keep HW errors acceptable on two B4 units. No X's, just too high % of HW errors for me.

and what is too high?

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Batch 1: Out of 5 units, 2 have to be clocked at 212. 1 does 450 GH/s at 225. Last 2 are stock.
Batch 4: 4 clocked at 250 and doing 500 GH/s. 2 at 225 doing 450 GH/s.

squashpile

full member

Activity: 125

Merit: 100

225 is best I can do and keep HW errors acceptable on two B4 units. No X's, just too high % of HW errors for me.

cloverme

legendary

Activity: 1512

Merit: 1057

SpacePirate.io

Quote from: jonnybravo0311 on August 12, 2014, 11:48:49 AM

Batch 1:
218.75 @ 441GH/s
212.5 @ 428GH/s

Batch 4:
225 @ 453GH/s
225 @ 452GH/s
237.5 @ 476GH/s

Batch 5:
237.5 @ 478GH/s
237.5 @ 479GH/s
250 @ 505GH/s

I had absolutely no luck over clocking batch 1 units. As you can see, one of them only runs stable under clocked. I had better luck with batch 4, and the best luck with batch 5.

Agreed... Batch 1 overclocked as well as trying to bake bread underwater.

Surprised that you could get Batch 5 stable at 505? The seem to get a bit twitchy around 480...

ValadisBS

newbie

Activity: 6

Merit: 0

could you plz upload the settings Huh

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Batch 1:
218.75 @ 441GH/s
212.5 @ 428GH/s

Batch 4:
225 @ 453GH/s
225 @ 452GH/s
237.5 @ 476GH/s

Batch 5:
237.5 @ 478GH/s
237.5 @ 479GH/s
250 @ 505GH/s

I had absolutely no luck over clocking batch 1 units. As you can see, one of them only runs stable under clocked. I had better luck with batch 4, and the best luck with batch 5.

Topic: Antminer S3 Overclocking, what's your results ? (Read 2238 times)