Is this good enough?
http://www.ebay.com/itm/1M-EU-Plug-Main-Power-Cable-Silver-Plated-Audiophile-Hi-end-4N-OFC-15A-250V-Pro-/231833122229?hash=item35fa54b5b5:g:hPUAAOSwdpxUUzgA
Topic: Antminer S7 turned off automatically - page 2. (Read 3277 times)
Before powering it up again it was very emphasized on antminer s7 to give a shake to it and check if any of tge heat sniks have become losse or fallen
I gave a shake to it and I felt a little that there is something in device which makes sound. Do you think I should open fans and take a closer look at hashboards ??
I gave a shake to it and I felt a little that there is something in device which makes sound. Do you think I should open fans and take a closer look at hashboards ??
Yes but get a strong flashlight do both fans and look all the way through the miner
Before powering it up again it was very emphasized on antminer s7 to give a shake to it and check if any of tge heat sniks have become losse or fallen
I gave a shake to it and I felt a little that there is something in device which makes sound. Do you think I should open fans and take a closer look at hashboards ??
I gave a shake to it and I felt a little that there is something in device which makes sound. Do you think I should open fans and take a closer look at hashboards ??
I don't see why the 1,5mm2 would only be rated 10A.
Yes, that's strange
I don't see why the 1,5mm2 would only be rated 10A.
I would use this one.
I would use this one.
After 4 hour of looking in stores to find a 1.5mm^2 cable
Finally I bought two cable
1.5mm^2 250V 10A
1mm^2 250V 10-16A
Which one I should use ??
Finally I bought two cable
1.5mm^2 250V 10A
1mm^2 250V 10-16A
Which one I should use ??
I have a couple of spare power cables with 1mm2 internal wires that I can try to send you from France if you want.
I'm using 18AWG (0.824mm2) for my S3 power suppply (850W)
and as they have a EU plug, you won't need the travel adapter
I'm using 18AWG (0.824mm2) for my S3 power suppply (850W)
and as they have a EU plug, you won't need the travel adapter
that cable for your power cord is totally and completely not acceptable.
1.4mm is good .75mm is a fucking joke.
FIRE FIRE FIRE!!!! can I make it any clearer then that?
tell me your country and I will search a proper power cord for you. As dying for mining coins is not acceptable.
DO NOT PLUG IT IN WAIT FOR A NEW CORD!!!!!!!!
I'm in Iran 1.4mm is good .75mm is a fucking joke.
FIRE FIRE FIRE!!!! can I make it any clearer then that?
tell me your country and I will search a proper power cord for you. As dying for mining coins is not acceptable.
DO NOT PLUG IT IN WAIT FOR A NEW CORD!!!!!!!!
just fucking cheap chinese cables are availibale here
I told the sellers houndred of time that i'm gonna use a 16A device which is going to be 24/7 on, and they all gave me this fucking cable
i just tried to test the PSU
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
that cable for your power cord is totally and completely not acceptable.
1.4mm is good .75mm is a fucking joke.
FIRE FIRE FIRE!!!! can I make it any clearer then that?
tell me your country and I will search a proper power cord for you. As dying for mining coins is not acceptable.
DO NOT PLUG IT IN WAIT FOR A NEW CORD!!!!!!!!
i just tried to test the PSU
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
I would first try eliminating things. Can you try without adapter?
See if it powers up without it go to the IP and access it and see what miner say's. If it works without adapter then look at cable next and see if it get's hot. If so stop using it if truly hot to touch and get a better cable.
i just tried to test the PSU
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
unpluged all PCI's then pluged it to power but the fan didn't run
is iit ok ? or the fan should start ?
If the power cord got very hot, then that means it's either faulty or too small or gauge to handle to power being pulled through it. You need to get a new, bigger gauge cable to start. Then you can determine if there was damage to the miner or psu (probably not). The miner likely shut down due to lack of power due to the crappy cable.
If the power cable got hot where it plugs into your adapter, then it could also be caused by the adapter.
If the power cable got hot where it plugs into your adapter, then it could also be caused by the adapter.
That is the problem it could be either of these. The adapter just does not appear to be something I would send 1300 or more watts through.
The cable I think is to small of gauge most likely. Getting hot is a pretty good indicator of this. The best of "local markets" might not be good enough I order a decent PSU cable from amazon when I'm getting one for a server PSU like the bitmain one. I have a feeling most local markets unless you have a good computer store is not good enough.
If the power cord got very hot, then that means it's either faulty or too small or gauge to handle to power being pulled through it. You need to get a new, bigger gauge cable to start. Then you can determine if there was damage to the miner or psu (probably not). The miner likely shut down due to lack of power due to the crappy cable.
If the power cable got hot where it plugs into your adapter, then it could also be caused by the adapter.
If the power cable got hot where it plugs into your adapter, then it could also be caused by the adapter.
The other thing is it sounds like your using your power cable from a PC for the bitmain server PSU? I personally use a nicer heavier gauge cable for my bitmain PSU's that goes into a PDU.
If your using a cheap power cable i could see that as a reason for it to heat up possibly. Don't know enough to say since don't know what your using. There are different AWG cables. Some are much nicer then others.
If your using a cheap power cable i could see that as a reason for it to heat up possibly. Don't know enough to say since don't know what your using. There are different AWG cables. Some are much nicer then others.
that is what i'm using 220V & 10-16A & 3*0.75mm^2 it was very hard to find a cable which support 16A and the yes it was very cheap but the was the most expensive in those cheap cable
and it is impossible for me to buy a PDU
do you think the antminer has been damaged ?
Where do you get stats for the surge protector/adapter. Just looking at that thing it looks pretty cheap. Is it truly rated for this kinda power?
And I could be off base and it is perfect. Just have not seen anyone post before that I know of using a 8 dollar dollar adapter for so many watts.
it was the only adapter availibale in local markets . the questions is do you think thats the problem ??
The other thing is it sounds like your using your power cable from a PC for the bitmain server PSU? I personally use a nicer heavier gauge cable for my bitmain PSU's that goes into a PDU.
If your using a cheap power cable i could see that as a reason for it to heat up possibly. Don't know enough to say since don't know what your using. There are different AWG cables. Some are much nicer then others.
Where do you get stats for the surge protector/adapter. Just looking at that thing it looks pretty cheap. Is it truly rated for this kinda power?
And I could be off base and it is perfect. Just have not seen anyone post before that I know of using a 8 dollar dollar adapter for so many watts.
it was the only adapter availibale in local markets . the questions is do you think thats the problem ??
before asking the question it is better to interduce what i am using in
Antminer S7 (Bought from BitMain)
BitMain PSU (Bought from BitMain)
220V & 10-16A & 3*0.75mm^2 Power Cord for the PSU
A DAIYO laptop power protector which supports 10-16A & 250V (http://www.daiyo.com.sg/index.php?route=product/product&product_id=110)
Yesterday I recived my antminer S7 so when I had connected PCI pins i connected the PSU's power cord with that laptop power adapter i said.
Then the antminer powered up with variable fan speed. Then i connected the network cable then when i was going to sit in front of my pc to config the antminer it just powered off and i didn't understand which one powered off first PSU or Antminer but they both had turned off.
i ran and unplug the Power Cord (It was very hat) so that i thought that the pwoer cord may has burned so to test that i connected that to my compuetr psu and my computer didn't powered up so then i knew it that it was burned but 30min after my father test that again and this time my computer powered up .
what is the problem ?? Pleas help
What made Antminer to turn off automatically ??
Have i done anything wrong ?
Someone told me i should have used a 3*1.5mm^2 Power Cord is that the answer ?
Has the antminer been damaged ??
here is a picture of my antminer
Antminer S7 (Bought from BitMain)
BitMain PSU (Bought from BitMain)
220V & 10-16A & 3*0.75mm^2 Power Cord for the PSU
A DAIYO laptop power protector which supports 10-16A & 250V (http://www.daiyo.com.sg/index.php?route=product/product&product_id=110)
Yesterday I recived my antminer S7 so when I had connected PCI pins i connected the PSU's power cord with that laptop power adapter i said.
Then the antminer powered up with variable fan speed. Then i connected the network cable then when i was going to sit in front of my pc to config the antminer it just powered off and i didn't understand which one powered off first PSU or Antminer but they both had turned off.
i ran and unplug the Power Cord (It was very hat) so that i thought that the pwoer cord may has burned so to test that i connected that to my compuetr psu and my computer didn't powered up so then i knew it that it was burned but 30min after my father test that again and this time my computer powered up .
what is the problem ?? Pleas help
What made Antminer to turn off automatically ??
Have i done anything wrong ?
Someone told me i should have used a 3*1.5mm^2 Power Cord is that the answer ?
Has the antminer been damaged ??
here is a picture of my antminer
Where do you get stats for the surge protector/adapter. Just looking at that thing it looks pretty cheap. Is it truly rated for this kinda power? *read the stats on back of packaging. Have you tried without that adapter even though it say's up to 16a just looks cheap?
And I could be off base and it is perfect. Just have not seen anyone post before that I know of using a 8 dollar dollar adapter for so many watts.
before asking the question it is better to interduce what i am using in
Antminer S7 (Bought from BitMain)
BitMain PSU (Bought from BitMain)
220V & 10-16A & 3*0.75mm^2 Power Cord for the PSU
A DAIYO laptop power protector which supports 10-16A & 250V (http://www.daiyo.com.sg/index.php?route=product/product&product_id=110)
Yesterday I recived my antminer S7 so when I had connected PCI pins i connected the PSU's power cord with that laptop power adapter i said.
Then the antminer powered up with variable fan speed. Then i connected the network cable then when i was going to sit in front of my pc to config the antminer it just powered off and i didn't understand which one powered off first PSU or Antminer but they both had turned off.
i ran and unplug the Power Cord (It was very hat) so that i thought that the pwoer cord may has burned so to test that i connected that to my compuetr psu and my computer didn't powered up so then i knew it that it was burned but 30min after my father test that again and this time my computer powered up .
what is the problem ?? Pleas help
What made Antminer to turn off automatically ??
Have i done anything wrong ?
Someone told me i should have used a 3*1.5mm^2 Power Cord is that the answer ?
Has the antminer been damaged ??
here is a picture of my antminer
Antminer S7 (Bought from BitMain)
BitMain PSU (Bought from BitMain)
220V & 10-16A & 3*0.75mm^2 Power Cord for the PSU
A DAIYO laptop power protector which supports 10-16A & 250V (http://www.daiyo.com.sg/index.php?route=product/product&product_id=110)
Yesterday I recived my antminer S7 so when I had connected PCI pins i connected the PSU's power cord with that laptop power adapter i said.
Then the antminer powered up with variable fan speed. Then i connected the network cable then when i was going to sit in front of my pc to config the antminer it just powered off and i didn't understand which one powered off first PSU or Antminer but they both had turned off.
i ran and unplug the Power Cord (It was very hat) so that i thought that the pwoer cord may has burned so to test that i connected that to my compuetr psu and my computer didn't powered up so then i knew it that it was burned but 30min after my father test that again and this time my computer powered up .
what is the problem ?? Pleas help
What made Antminer to turn off automatically ??
Have i done anything wrong ?
Someone told me i should have used a 3*1.5mm^2 Power Cord is that the answer ?
Has the antminer been damaged ??
here is a picture of my antminer
Jump to: