Topic: ANTMINER U3 Discussion and Support Thread - page 41. (Read 149415 times)
Yes, the metal base gets VERY hot on the v2's as well. I use a thermaltake usb fan for the underside and it keeps it much cooler
So this "mod" has provided much better results as far as cooling and operating stability go vs. what I saw from re-doing the thermal paste:
Yea, and it's a shame, too, because for us hobby miners these would have been great little machines. 3 of them equals the hashing power of an S1, but at like 1/2 of the power consumption. I wish I knew anything about electronics, I'd take the 3 I have and cannibalize their chips and make my own 180gh miner.
If power cycling is all that's needed, that could certainly be programmed. A device popped up on tindie recently to toggle USB power using an external control, and controllable sockets of course exist. Seems like too much investment (money+time) to really be worth it though.Avalon might be doing a small miner as well, could see what they've got up their sleeves.
The communication chip needs to be power cycled because it stops responding. Even power cycling the device doesn't work because the comms chip draws power from the usb coming from your pc while the device is off. You'd have to power cycle everything and the only way to do this would be by putting everything on a power distribution unit and having it power down for 1 minute or so before it powers back up. I guess you could automate this to do it once per day or something but you'd be much better off just using the U3s as paperweights or doorstops, as a harsh reminder of what a dud purchase they were.
*chuckles*
Fair enough. As a hobbyist I can't say I mind that much, but still. What a piece of crap product.
Yea, and it's a shame, too, because for us hobby miners these would have been great little machines. 3 of them equals the hashing power of an S1, but at like 1/2 of the power consumption. I wish I knew anything about electronics, I'd take the 3 I have and cannibalize their chips and make my own 180gh miner.
The communication chip needs to be power cycled because it stops responding. Even power cycling the device doesn't work because the comms chip draws power from the usb coming from your pc while the device is off. You'd have to power cycle everything and the only way to do this would be by putting everything on a power distribution unit and having it power down for 1 minute or so before it powers back up. I guess you could automate this to do it once per day or something but you'd be much better off just using the U3s as paperweights or doorstops, as a harsh reminder of what a dud purchase they were.
*chuckles*
Fair enough. As a hobbyist I can't say I mind that much, but still. What a piece of crap product.
There is no fix, this is how the U3 operates. Plug and re-plug daily. Use a high quality USB cable.
What's the problem? Hardware implementation or problem ZADIG? Possible to fix it? External USB-hub correct position, if he temporarily turn off the power?Read this whole thread and you'll find pages of people complaining about these units going zombie. They need to be restarted almost every day, it's just how they are. Maybe Bitmain could tell us, but since they haven't by now I don't think they know either.
Any suggestion on a substitution for plugging and replugging when controlling them remotely? Rebooting my pi remotely doesn't seem to do the trick.
There is no fix, this is how the U3 operates. Plug and re-plug daily. Use a high quality USB cable.
What's the problem? Hardware implementation or problem ZADIG? Possible to fix it? External USB-hub correct position, if he temporarily turn off the power?Read this whole thread and you'll find pages of people complaining about these units going zombie. They need to be restarted almost every day, it's just how they are. Maybe Bitmain could tell us, but since they haven't by now I don't think they know either.
Any suggestion on a substitution for plugging and replugging when controlling them remotely? Rebooting my pi remotely doesn't seem to do the trick.
Read this whole thread and you'll find pages of people complaining about these units going zombie. They need to be restarted almost every day, it's just how they are. Maybe Bitmain could tell us, but since they haven't by now I don't think they know either.
I have read this entire stream and see that all are facing this problem. I spent two months trying to get to work normally. I regret that I bought two of these blocks. It did not finish the model that sell. I will not buy ANTMINER and others will not advise. My GRIDSEED works for weeks without rebooting.
There is no fix, this is how the U3 operates. Plug and re-plug daily. Use a high quality USB cable.
What's the problem? Hardware implementation or problem ZADIG? Possible to fix it? External USB-hub correct position, if he temporarily turn off the power?Read this whole thread and you'll find pages of people complaining about these units going zombie. They need to be restarted almost every day, it's just how they are. Maybe Bitmain could tell us, but since they haven't by now I don't think they know either.
There is no fix, this is how the U3 operates. Plug and re-plug daily. Use a high quality USB cable.
What's the problem? Hardware implementation or problem ZADIG? Possible to fix it? External USB-hub correct position, if he temporarily turn off the power? After 30-40 hours of U3 goes into zombies. Removes it from the Zombie Mode only juggling cable USB. How can I get rid of it? Connect the 2 devices. Pass mode zombies are not at the same time. 0.8V supply voltage, frequency 255.
There is no fix, this is how the U3 operates. Plug and re-plug daily. Use a high quality USB cable.
After 30-40 hours of U3 goes into zombies. Removes it from the Zombie Mode only juggling cable USB. How can I get rid of it? Connect the 2 devices. Pass mode zombies are not at the same time. 0.8V supply voltage, frequency 255.
I've got 5 more of these coming.
Good luck getting more than 1 to work at the same time.
Got 3 running right now. More hardware errors it seems with multiple running, but working fine so far.
Other 3 I am going to sell as I have another large rig coming so space is an issue, but these are still good little rental units.
Good to hear, I think my issues with not being able to run more than 1 are specific to my computer.
The one I am running is pointed to ck's solo pool, as mentioned. Good advice.
Good for a Solo Mining for a fun at http://solo.ckpool.org 
I've got 5 more of these coming.
Good luck getting more than 1 to work at the same time.
Got 3 running right now. More hardware errors it seems with multiple running, but working fine so far.
Other 3 I am going to sell as I have another large rig coming so space is an issue, but these are still good little rental units.
I've got 5 more of these coming.
Good luck getting more than 1 to work at the same time.
Got 3 running right now. More hardware errors it seems with multiple running, but working fine so far.
Other 3 I am going to sell as I have another large rig coming so space is an issue, but these are still good little rental units.
I've got 5 more of these coming.
Good luck getting more than 1 to work at the same time.
Got 3 running right now. More hardware errors it seems with multiple running, but working fine so far.
Other 3 I am going to sell as I have another large rig coming so space is an issue, but these are still good little rental units.
See if the reseller will give you the info from the original invoice like date and #,it might help but the warranty starts when he got them.
Good idea, I will try to track that info down from him, thanks.
See if the reseller will give you the info from the original invoice like date and #,it might help but the warranty starts when he got them.
Bitmain,
I think need to RMA one of my U3s, it has stopped hashing all together. I came home from work yesterday and it was zombie (which is nothing new) but this time nothing I can do will get it to work again. I've zadig and restarted several times, plugged and unplugged, but when you plug the USB in the one red power led comes on, then the hashing red led flashes a few times and that's it, the hashing led never goes solid. cgminer does not ever recognize it being plugged in (but it does give an error when I unplug it).
If you didn't buy it from Bitmain you need to RMA it where you bought it. Bitmain will not RMA it.I think need to RMA one of my U3s, it has stopped hashing all together. I came home from work yesterday and it was zombie (which is nothing new) but this time nothing I can do will get it to work again. I've zadig and restarted several times, plugged and unplugged, but when you plug the USB in the one red power led comes on, then the hashing red led flashes a few times and that's it, the hashing led never goes solid. cgminer does not ever recognize it being plugged in (but it does give an error when I unplug it).
Bought from Amazon and the seller will not accept for exchange because he doesn't have them any more.
If you are having problem with your U3, please PM us.
or you can return the U3 to the following address in the original box, and the replacement will be send to you from the factory
Bitmain Warranty
3700 Quebec St.
Unit 100-239
Denver, Colorado 80207
tel; +1-844-248-6246
Please include the purchase receipt from where you purchased it from.
or you can return the U3 to the following address in the original box, and the replacement will be send to you from the factory
Bitmain Warranty
3700 Quebec St.
Unit 100-239
Denver, Colorado 80207
tel; +1-844-248-6246
Please include the purchase receipt from where you purchased it from.
Maybe I'll PM them...
Bitmain,
I think need to RMA one of my U3s, it has stopped hashing all together. I came home from work yesterday and it was zombie (which is nothing new) but this time nothing I can do will get it to work again. I've zadig and restarted several times, plugged and unplugged, but when you plug the USB in the one red power led comes on, then the hashing red led flashes a few times and that's it, the hashing led never goes solid. cgminer does not ever recognize it being plugged in (but it does give an error when I unplug it).
If you didn't buy it from Bitmain you need to RMA it where you bought it. Bitmain will not RMA it. I think need to RMA one of my U3s, it has stopped hashing all together. I came home from work yesterday and it was zombie (which is nothing new) but this time nothing I can do will get it to work again. I've zadig and restarted several times, plugged and unplugged, but when you plug the USB in the one red power led comes on, then the hashing red led flashes a few times and that's it, the hashing led never goes solid. cgminer does not ever recognize it being plugged in (but it does give an error when I unplug it).
I've got 5 more of these coming.
Good luck getting more than 1 to work at the same time.
Jump to: