Topic: Antminers E3 still alive for ETH? - page 4. (Read 2188 times)

4GB units , with some missing chains

Are they 4gb units? or the larger ones.

Two Rtx 3080 can outperform a single Bitmain E3 , with a much better power usage
All RTX 3060TI / 3070 / 3080 / 3090 cards are out of stock within a second after they become available in any online retailer on MSRP price .

I have E3's still hashing ... so they not done yet

Gee do you think it might be due to all the new GPUs coming on line.....

Yes quite disappointing eh? I was hoping the difficult would get reduced by like 25% or so, so my 8GB would be more profitable however. The E3 and 4GB GPUs going offline has done absolutely nothing .

I guess globally there must really be millions of GPUs out there mining or some high tech ETH ASICS that the E3 shutdown doesn’t make a blip in the hash rate charts.

Might still go down when epoch 382 hit in 2 days. However I doubt it will even cause hashrate to decrease by 5%. I guess bitmain had a supply constraint of the DDR2 ram chips and couldn’t mass produce the E3 miners.

Funny, even though eth e3 asics are done for, difficulty is not going down, actually is increasing faster than before. It's all time high at moment, https://etherscan.io/chart/difficulty . It seems eth price will rise in the next few days.

I stopped trying. I am mining ETP now. I wish E3 can mine ETC with new algo, but not sure bitmain will do firmware update.

You can't tell how many users are using asic miner E3 out of the hashrate mate, I'm sure many E3 miner have already sell their rigs and upgrade to better miner, it's same thing with those using 4gb VRAM graphics card for mining Ethereum, do not buy E3 because they are very close to been fully obsolete

I kept 3 of my E3 .. another ones sold in August
2 of those i kept,  have 1-2-3 non functional chain , those are hashing fine as of today
1 have all the chain working , and that's one went offline this morning ...
tried everything , just in case replaced psu , unplugged 1 -2 blades , re-fleshed the firmware ...still nothing
So its time when those e3'become a paper weight or door stops... or whatever
Leaving the non functional e3 online for tonight, maybe by the morning im going to get some hashes out from it ... if not , its time for a retirement
Tomorrow i Might giving a try to connect to antpool , i heard some ppl get lucky , and antpool worked for them , after they tried everything .. if its just a few days , or hours , still better than nothing

My 4GB GPUs stopped mining on epoch 381 which started 2 days ago. However there are reports of some GPUs going until epoch 382. I think it’s the same with the E3. Some are still hashing while others are down. I think the final nail on the coffin will be in 3 days when epoch 382 starts. No more 4GB GPUs (unless they run that lolminer software) and E3 will cease to mine.

Will hash rate decrease? Honestly I don’t think it will change much. When epoch 381 hit, the hash rate went sideways. And assuming same for epoch 382. I think many knew this was coming a long time ago and upgraded to be prepared.

I actually was hoping to see a hash rate reduction when 4GB went offline so the 8gb would be more profitable but doesn’t seem to be the case here. Newer ASICS are vert advanced and efficient and so are some of the GPUs that were released in the last year.

us.
1 is out as of today , its went offline this morning , and from there i tried everything, but wasn't able to bring back that one alive ...
still messing with it ...

In the kernel log , can you see something like this "[_WorkerThread]:  CRC Check Failed! Drop!"

which server? eu? us? or asia1?

All of my E3's are on ethrmine.org

i tried, didnt work. Waiting 2 hours still not mining..

i am using Ethermine. What pool u r using? i didnt disconnect miner from power source.  I will try it. Thanks 

What pool are you using ? Did you tried to disconnect your miner from power source for a few minutes ,then restarting .. Thats might help..
Dont ask me why
... just try and be patient , its might take over a hour to start mining again

cannot mine and stop mining eth yesterday. the end..

Giving you a bunch of merits since you took the time to post a detailed calculations. I always wonder which ASICs were a good investment and which were not. Was always curious about the E3. I guess the biggest fear of the E3 at the time was not the difficulty but the fear of the eth devs changing the algo.

I remember that most people ROI'd on the Antminer S1, while many never ROI'd on the S2,S3,S4 then the S5 and S7 were pretty profitable. S9 and on I never really took the time to make the calculations. I also know that most Scrypt ASICs such as the KnC Cube Titans and Antminer L3 (or whatever its called) was also pretty profitable.

Thanks for the detailed calculation.

Im sure all my E3 earned me way more money what i paid for those units . My electricity rate is 12cents from June to September , all other months is between 7-8 cents . Im  Doing mining as a business ...
I was lucky , ordered my E3 from the very first batches , if i remember right , in 2018 summer first batches was around 800$ each with shipping or something very close to that . Some gpu or mem went out on those blades , but still all of them hashing . I have those units in the past 25 months if i remember right ...

Lets do a little math with 10 unit and average hashrate around 170MH/s... with 780 watts of power usage ... and current ETH price/difficulty calculation ...
Total investment 10x800=8000$
Total hashrate 10x170=1700MH/S
Total power used for 25 months : 7,8KWH/hours , 187.2KWH/day , 5616KWH/months so 25x5616KWH for 25 months = 140400KWH ...
12cent/kwh power rate for 8 months :5616x8 = 44928KWH for summer months = 44928x0.12=  5391$ for 8 summer months power
8cent/kwh power rate for another 17 months : 5616x17 = 95472KWH for the remaining 17 months , = 95472x0.08 = 7637$ for 17 months power

So for 25 months I paid 13028$ for power to run 10 Antminer E3 , that 10 miner provided me 1700MH/s hashing power .

As of today , You can do a calculation with 0.0345 USD/Day for 1 MHash/s , so with today prices my 10x E3 still earning me 0.0345 USDx1700/day = 58.65$ minus power usage 187.2KWHx0.08cents=14.976$ so the total what im makin as of today with those 10 antminer E3 is still not that bad  as of today , 12-10-2020 , 58.65$-14.976$= 43.67$/day profit after electricity

If calculating back for the 25 months with today numbers , then this is how its look like :
43.67x30x25 the total money i made with my 10x E3  , if we do the math , then is 32755$  , I paid 8000$ for the 10 E3 25 months ago ,minus power usage, so the profit : 32755-13028-8000=11727$ Profit for 25 months .
Thats on paper with today difficulty , price ... BUT THERE IS A VERY IMPORTAT THING ABOUT MY MINING PROFIT !!! I NEVER SOLD THOSE HARD EARNED ETH'S.

With today price/difficulty ... i can mine around 2.8-2.9 ETH / month
But dont forget ... in 2019 when the difficulty was way lower , actually half what we have now , i was able to mine 5.5-6 ETH/months . Even on this summer i was able to mine around 4-4.5 ETH/monts . Difficulty jumped like crazy from the end of July !  I  still have all those hard earned ETH's from the past 25 months, so the real profit,  is way much higher what i calculated here for you...

I hope i give you a very detailed answer i Might opening another topic with all this information