Topic: AOCLBF 1.81 - Dynamic clocks adjusting Manual fanspeed on startup (Read 7353 times)
December 01, 2012, 05:30:22 PM
Could you make a modification to suspend work for certain times. Have an area to select hours of the day to work 1-24. It'd be a big help to those of use who are on smart meters. Work from 1900-700 and then stop for the day x 5 except for weekends type thing.
August 28, 2011, 02:37:37 AM
STP
What do you get when you set the fanspeed to default (set it to 0)? Have you got any error there?
What do you get when you set the fanspeed to default (set it to 0)? Have you got any error there?
Its only when I set it.
August 27, 2011, 02:36:36 PM
STP
What do you get when you set the fanspeed to default (set it to 0)? Have you got any error there?
What do you get when you set the fanspeed to default (set it to 0)? Have you got any error there?
August 27, 2011, 01:56:24 PM
It's also not displaying the RPM's in the OSD. I think the errors I get on the fan are it trying to set on the second cores of each card. Fan can only be set on primary core for these dual gpu cards. I assume that's also why I am getting 0 RPM displayed too?
August 27, 2011, 11:11:00 AM
I am getting an Error: -8 message. "Error setting fan speed!" I have 2x5970's in this system. As soon as I click OK on these error dialogs its sets the fan speed. Not going to be helpful if running as startup after a reboot.
August 27, 2011, 08:54:26 AM
Version 1.81 released. The topic has moved to https://bitcointalksearch.org/topic/aoclbf-184-by-wind-dynamic-clocks-adjusting-completely-autofanspeed-39697
August 21, 2011, 12:42:46 PM
I think it might have a memory leak tho.
today i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
What version of phoenix do you use? Looks like 1.6.1 because 1.6.2 has this bug fixedtoday i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
I am on 1.6.2
I went from 1.5 to 1.6.2
August 21, 2011, 07:38:02 AM
Nice one! Testing away. I just remembered, I have a suggestion, is there any way we could 1. "resize the whole window" and "save the resize"? If you noticed there's no way to do that.
Oh and a way to 2."hide the OSDs."
One last, a 3."console like window comparable to the summary page of the GUI Miner".
I believe you can now post in the Mining Support board so that you're work will be seen by more people; just link to original post. Regards! =)
Oh and a way to 2."hide the OSDs."
One last, a 3."console like window comparable to the summary page of the GUI Miner".
I believe you can now post in the Mining Support board so that you're work will be seen by more people; just link to original post. Regards! =)
To add to that, if you could have a workaround with the voltage adjustment, this would be the best kickass GUIMiner!
Thanks! August 19, 2011, 02:10:04 AM
Can 1.8 version adjusts voltage clock?
No August 18, 2011, 08:49:04 PM
Can 1.8 version adjusts voltage clock?
August 18, 2011, 07:41:00 AM
thanks for keeping this up to date
August 18, 2011, 12:46:06 AM
I think it might have a memory leak tho.
today i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
What version of phoenix do you use? Looks like 1.6.1 because 1.6.2 has this bug fixedtoday i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
Anything similar to this utilitity available for Linux? Thanks
I don't khow but looks like no such utility all-in-one 
August 17, 2011, 08:39:39 PM
Anything similar to this utilitity available for Linux? Thanks
August 17, 2011, 06:12:50 PM
this one is really nice.
I think it might have a memory leak tho.
today i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
I think it might have a memory leak tho.
today i came back home, and i had no internet, and my pc was displaying a "low memory" warning.
I had it set to reconect if it was idle for 15 seconds, so it might be related to that.
August 17, 2011, 09:15:18 AM
tested 1.8...its finally perfect. minimize on start and the overclock it all works..works well. thank you very much
August 17, 2011, 06:32:35 AM
In your's is it support up to 8 GPU's directly with out need for any manual device id selection?
I haven't 8 GPU's unfortunatly to test. Test and post your results here please. Be sure catalyst 11.7 is installed 
August 17, 2011, 06:11:19 AM
Is your AOCLBF support more than 4 GPU's. Coz the original AOCLBF if detect more than 4 GPU's then it will only give the 1st 4 in drop down list & ask to enter the others manually & manually adding never worked for me.
In your's is it support up to 8 GPU's directly with out need for any manual device id selection?
In your's is it support up to 8 GPU's directly with out need for any manual device id selection?
August 17, 2011, 01:46:59 AM
Would there be any way for me to disable that? I have a miner setup with the cards oc'ed to where I want them, and the temps are stable so I don't want them reset to default, would still like to use your 1.8.
set to default only on exit works. That is when you exit mining your cards are set to default and when you start mining-all your OC settings return
how exactly is the "overclock gpu" parsed? it seems to be worded strange.
"over clock gpu if temp is >X, downclock if
"over clock gpu if temp is >X, downclock if
you're quite right. Will be fixed
August 16, 2011, 06:08:20 PM
how exactly is the "overclock gpu" parsed? it seems to be worded strange.
"over clock gpu if temp is >X, downclock if
"over clock gpu if temp is >X, downclock if
August 16, 2011, 04:57:25 PM
Would there be any way for me to disable that? I have a miner setup with the cards oc'ed to where I want them, and the temps are stable so I don't want them reset to default, would still like to use your 1.8.
Jump to: