Topic: ▆ ▇ █ARBI BOT█ ▇ ▆ HFT Triangular Arbitrage [Poloniex] [OKEx] [Yobit] [Binance] - page 13. (Read 53447 times)

Hi,
how to download a copy of Arbi bot for windows 64bit to try it before to buy?

Any link of this?

Update :

If you don't agree with God Almighty, you will be kicked out of the community group.

You would then have no way to have any help from other users in the same case, or good samaritans willing to help (actually don't expect too much from the community as well, only one guy offered his help in a full week...).

Let's face it. Everything in this bot sucks badly.

That might explain why it is sold off compared to CAT by the way... and why you can't find anything related to it on the net, except from this thread...



I have to admit, @Bz Co was right, I was really dumb... How could I purchase this unknown shit, even at this price?


Does somebody want my useless licence?

No?

Sure?

Come on, that's a bargain guys!!! I give this crap away! (except if you offer me a switch with CAT of course  )

Hi all,

Just an advice based on my experience before you choose to purchase this bot.

You really want to watch out before taking your decision!!!


Don't buy it if you are planning to run it on a non x86 architecture. (Raspberry pi in my case)

@BZ Co, lovely creator of the bot, is gonna tell you to f... off if you purchased it without knowing this point. Everybody knows nobody runs bots on Raspberry, that's well-known...

You will have no help to set it up when you will be asking
Then, if by chance she deign to answer you again, she is gonna start to swear on you that you are "so dumb", it was obvious it won't work. That she has "no tolerence to dickheads" and she will start swearing on you.
She will never ever take a look on your issue and just say that you "waste her (precious) time" (I admit it might be important to do so as the last version released is bugged as hell at the moment I'm writing and she is probably in a hurry to fix it).

But WTF?!!! You just asked the girl (presented as developper support ), who just wrote in her advertisement her program is running under Windows & Ubuntu 16.04
http://file:///home/tibo/Documents/Screenshot%20from%202018-01-20%2008-57-40.png
why you can't run her bot on your Raspberry under... Ubuntu 16.04 (advertised tested, very quickly then)... You are then told rudelessly (if not more) to "stop whining" and that "you should have asked before buying it"  

Needless to say, you will be answered sharply that there is no refund if you ask.

So if you are lucky enough to make her bot working on Ubuntu 16.04 with an obvious x86 CPU (v1.5.7 seems fine from what I can see on the "support" group, don't use the last one), don't think about expecting any support if something goes wrong.


After taking a look on the real CAT Bot community, I would seriously advise you to spend a bit more bucks, and choose this one. It seems to work fine, users look like really happy about it. Description is not shady and you have what you paid for.
And most of all, it is user friendly and you have a real support.
This bot is not dumbly coded requiring mono-devel. It is running with Java 8 which makes it way more simple to use it, under any OS, and with most of the CPU architecture.

I am aware I am not a computer champ, but I still managed to run 2 other bots on my rasp without problem. All I wanted was a little help, or a quick explanation why I was loosing my time trying to sort the things out on my own. That was probably funnier for her to leave me look for a non-existing solution before insulting me.


I would really appreciate if a mod could add in the BOT description that the program is not compatible with non x86 CPU. It would help other people not to be fooled by false advertisement and suffer the same mishap. I'm pretty sure I'm not the first one being stolen, and, more than an oversight, I consider it to be a SCAM

Hope this will help.

So, even if you are "dumb", just be smart on this one. If not, good luck with this absolute b..ch

hello bzcorp,
yesterday i purchased your bot and started it with the default settings (only entered my API key and secret). It runs for a couple of hours and I saw this on the console:

STATUS: Arbitrage Skipped. (Not In Trend Range)[BTC_ETH][ETH_CVC][BTC_CVC][1/11/2018 1:26:24 AM]
STATUS: Arbitrage Skipped. (Not In Trend Range)[BTC_ETH][ETH_CVC][BTC_CVC][1/11/2018 1:26:24 AM]
1/11/2018 2:58:01 AM|Fatal|<>c__DisplayClass17.b__16|WebSocketSharp.WebSocketException:                                                                                       The header of a frame cannot be read from the stream.
                             at WebSocketSharp.WebSocketFrame.processHeader (System.Byte[] header) [0x0                                                                                      0017] in <38d3cef14c5a4fc9a92de0991034bc1a>:0
                             at WebSocketSharp.WebSocketFrame+<>c__DisplayClassa.b__9                                                                                       (System.Byte[] bytes) [0x00000] in <38d3cef14c5a4fc9a92de0991034bc1a>:0
                             at WebSocketSharp.Ext+<>c__DisplayClass9.b__8 (System.IAsy                                                                                      ncResult ar) [0x000a2] in <38d3cef14c5a4fc9a92de0991034bc1a>:0
STATUS: Clearing order books...
STATUS: Error: Socket closed.Reconnecting in 10 seconds...
STATUS: Web Socket Connected.
Total bank: 0.0055772909995910265234262002 ETH Avrg. price: 0.0896482316749999999999999982
STATUS: Arbitrage occured on [BTC_ETH][ETH_REP][BTC_REP] [For more info check the log][1/11/2018 3:32:2                                                                                      3 AM]
STATUS: STOP ROI Reached...Quitting

Tried to start the bot:

root@debian9:~/arbi# mono Arbi.exe

   ('-.     _  .-') .-. .-')            .-. .-')                .-') _
  ( OO ).-.( \( -O )\  ( OO )           \  ( OO )              (  OO) )
  / . --. / ,------. ;-----.\   ,-.-')   ;-----.\  .-'),-----. /     '._
  | \-.  \  |   /`. '| .-.  |   |  |OO)  | .-.  | ( OO'  .-.  '|'--...__)
.-'-'  |  | |  /  | || '-' /_)  |  |  \  | '-' /_)/   |  | |  |'--.  .--'
 \| |_.'  | |  |_.' || .-. `.   |  |(_/  | .-. `. \_) |  |\|  |   |  |
  |  .-.  | |  .  '.'| |  \  | ,|  |_.'  | |  \  |  \ |  | |  |   |  |
  |  | |  | |  |\  \ | '--'  /(_|  |     | '--'  /   `'  '-'  '   |  |
  `--' `--' `--' '--'`------'   `--'     `------'      `-----'    `--'
                                                        v1.5.7

LICENSE STATUS: VALID
Balance per trade : 0.0005
XMR PAIRS: True ETH PAIRS: True
Ticker Check Interval: 45000 ms
Price Lines: 0 , 1 , 9 Volume Multipliers 3 , 7 , 3
Dynamic Start Balance: True
Trend Mode (Pair1/Pair2/Pair3): 1 , 0 , 1
Candle Size: 5M Periods: 12
Profit Monitor Refresh Rate: 900000 ms Stop ROI: 999 % Time Offset: 0
PRESS ENTER TO START THE SCANNER / PRESS Q TO STOP THE SCANNER

STATUS: CONNECTING
STATUS: RUNNING
STATUS: Web Socket Connected.
STATUS: Starting Bank Monitor...
STATUS: Starting Trend Monitor...
STATUS: Starting Profit Monitor...
STATUS: Starting Frozen Monitor...
STATUS: STOP ROI Reached...Quitting

Here is the config:

root@debian9:~/arbi# cat config.json
{
  "XMR_Pairs": true,
  "ETH_Pairs": true,
  "Ticker_Check_Interval": 45000,
  "DynamicStartBalance": true,
  "BalancePerTrade": 0.0005,
  "Pair1_Price": 0,
  "Pair2_Price": 1,
  "Pair3_Price": 9,
  "Pair1_Volume_Multiplier": 3,
  "Pair2_Volume_Multiplier": 5,
  "Pair3_Volume_Multiplier": 3,
  "Pair1_Trend_Mode": 1,
  "Pair2_Trend_Mode": 0,
  "Pair3_Trend_Mode": 1,
  "Trend_Monitor_Candle_Size": "5M",
  "Trend_Monitor_Periods": 12,
  "Profit_Monitor_Refresh_Rate": 900000,
  "Profit_Monitor_Stop_ROI": 999,
  "Profit_Monitor_Time_Offset": 0
}

P.S. Moved the bot to windows 10 machine, same result:

c:\1.5.7>Arbi.exe

  ___  ____________ _____
 / _ \ | ___ \ ___ \_   _|
/ /_\ \| |_/ / |_/ / | |
|  _  ||    /| ___ \ | |
| | | || |\ \| |_/ /_| |_
\_| |_/\_| \_\____/ \___/ v1.5.7

LICENSE STATUS: VALID
Balance per trade : 0.0005
XMR PAIRS: True ETH PAIRS: True
Ticker Check Interval: 45000 ms
Price Lines: 0 , 1 , 9 Volume Multipliers 3 , 5 , 3
Dynamic Start Balance: True
Trend Mode (Pair1/Pair2/Pair3): 1 , 0 , 1
Candle Size: 5M Periods: 12
Profit Monitor Refresh Rate: 900000 ms Stop ROI: 999 % Time Offset: 0
PRESS ENTER TO START THE SCANNER / PRESS Q TO STOP THE SCANNER

STATUS: CONNECTING
STATUS: RUNNING
STATUS: Web Socket Connected.
STATUS: Starting Bank Monitor...
STATUS: Starting Trend Monitor...
STATUS: Starting Profit Monitor...
STATUS: Starting Frozen Monitor...
STATUS: STOP ROI Reached...Quitting

EDIT: bzcorp suggested to set "Profit_Monitor_Stop_ROI" to 65000. Now its working

Okey maybe I am using this tool wrong, this is how my config looks like.

{
  "XMR_Pairs": true,
  "ETH_Pairs": true,
  "Ticker_Check_Interval": 45000,
  "DynamicStartBalance": true,
  "BalancePerTrade": 0.01,
  "Pair1_Price": 0,
  "Pair2_Price": 2,
  "Pair3_Price": 8,
  "Pair1_Volume_Multiplier": 3,
  "Pair2_Volume_Multiplier": 5,
  "Pair3_Volume_Multiplier": 3,
  "Pair1_Trend_Mode": 1,
  "Pair2_Trend_Mode": 0,
  "Pair3_Trend_Mode": 1,
  "Trend_Monitor_Candle_Size": "5M",
  "Trend_Monitor_Periods": 12,
  "Profit_Monitor_Refresh_Rate": 900000,
  "Profit_Monitor_Stop_ROI": 999,
  "Profit_Monitor_Time_Offset": 0
}

What do you mean with "It looks like you are using volume multiplier on pair 2 of 7 or lower"? Do you have any suggestion to improved the configuration?

Good for you .Typically I ignore such questions.Let me remind you that Im not offering a deposit accounts or lending accounts or something similar.I cant guarantee you any profits.What Im selling is a tool...just like hammer.If you know what are you doing you can make good use of it, else you would not.When you go to buy a hammer do you ask the guy who sell it how much avrg. roi you will make with it?Someone can make wonders with it while others can just smash it in his head.I have seen bot owners who claims that their bot make avrg. X % per day, which in most cases are absolute bullshits like I have tolded you before.I have seen people who makes a lot more than that, I have seen people who cant even make profit.

You can continue wondering does it work or not, in the meantime all licenses will be probably sold.

Have a nice day! 

Yeah this whole thing seems flakey. Maybe it works well with very very small increments, but nothing worth investing in if you're looking to grow your portfolio more than a few cents a piece. I've asked for averages and other stats via PM, and all I got from bzcorp is "I cant tell you any average % per day.Everyone who claims such values istalking bullshits."

Interesting statement, considering a product that's supposed to work princely around the rates of several numbers and indicators. Statistics is everything in a world of numbers.

Uhm...let me see...maybe because I am programmer, not  a trader and thats what programmers do...sell apps.  
What if I keep it just for my self?Do you think that someone else will not decides to sell something similar?Think more globally not only what you see in front of your shoes.
Also your comparison is not very adequate.While Im selling the bot Im getting profit,if someone comes here to say how much he earns what will he get...fame?  .So IMO your comparison is way out of the scope.

Buddy...all bots/exchange users creates competition for each other....thats part of the game.If you dont like the idea you can find yourself some non-competitive hobby.  

That's like saying why would anyone try to sell such a bot if it were successful.  Especially if creates competition for each user of the bot. 

Hello...
First)It looks like you are using your whole balance (0.01btc) as balance per trade (0.01btc).If you have read the group's chat you should know that you must have at least 10x/15x balance per trade in your total balance.
Second)It looks like you are using volume multiplier on pair 2 of 7 or lower.You cant expect to be able to fill everytime an order that consist 1/7 from the total available balance on that price.There is more than 20k people online most of the time, you are not alone.


LOL "real-world truth".I hope you realise that people who run their bot successfully will not come here and tell you how happy they are and how they are doing it, rather you will see the comments of people who can't understand/get it working.

Would be interesting to see results with the trend monitor on.  Good that we're getting down to the real-world truth on the bots performance.  Hopefully more people can share their results.

I have already turn off "trend monitor" and I can share my Profit monitor:


And as you can see my balance don't increase so my much each day and "1/8/2018 11:50:01 PM" it get stuck holding ETH until "1/9/2018 7:31:33 AM" so it solid it with 0.0000453 profit.

I don't have this bot but can't you set the "trend monitor" to detect the chances of completing the triangle even though you might get stuck mid way.  For example even if it were to get stuck but the trends for each pair were calculated to be favorable anyway then each arb attempt would have a higher chance of success.

Hi,

I have used this bot almost one week now and to bad that no one has share a review of this bot.
If someone that has share a review before I bought it, I don't think that I would have bought it.
This bot cost me almost $300 and this is a greet bot.

It does do arbitrage but to bad that this bot is only in Poloniex and everyone is fight for the same arbitrage trade depend on settings.

It happened quite often that it got something like this:


And that means the trade has disappear or someone was before you.

Don't try to calculate the profit like if you invest $1000 and each day 1% and in 30 days it will be 30% or exponential because it will never be it because of the order it try to fill maybe don't used 100% of what you got.

I am doing about 0.00005 BTC each day and my setting for max per trade is 0.01BTC and I don't know If I give it more it will be better because it is depend on the arbitrage order.

0.00005 BTC are equal to $0.84 now I write this and to have my ROI it will take 300 / 0.84 = 357 days.

But I can say that this is good bot and good support from the developer.

use your  android  phone and use a new email. use your phone to get selfie..

I am more than 2 months that aspect is still nothing. warn me if they activate you, I will do the same.

Hi. I really want to try this bot but I am having troubles having my account verified at Poloniex. I submitted my passport and selfie more tban a week ago but until now, my profile is still pending verification. Can somebody help. Thanks.

hi there, first of all, great work. the bot looks great and I'm interested. After studying your bot I understand how storing unfilled orders for future transactions would be profitable (considering future prices go in our favor), but what concerns me is poloniex market taker/maker fee that could possibly reduce our profit.

in that sense, how does your bot fill an order? For instance, does it by default use the market taker rule so orders can be filled immediately? (considering this kind of arbitrage needs to be done quick enough). In this case does your bot takes into account profit post-fee?

on the other hand, if for instance the bot fills order using maker rule, fee is cheaper but it will place the order on the orderbook so it has to wait until the order gets taken from orderbook...which means this doesnt happen in split seconds, in fact the whole order can be unfilled for a period of time at which prices of other pairs could change.

thank you.

Hi, what happens if the bot buy some altcoin and can't fullfill the sell?

eg:
Bot Buy XMR ok (pair BTC_XMR)
Bot Buy BCN ok (pair XMR_BCN)
Bot cant Sell BCN (pair BTC_BCN)

I only see the bank option for ETH and XMR. The bot maintain bank for all coins? Or it will sell BCN without profit?

Thanks

What daily / weekly gains is everyone getting?