Topic: Armory 0.95 testing phase - page 6. (Read 8478 times)
I've seen the same debug statements on my end. Is you DB/GUI stuck or crashed? Shouldn't be.
testing 27e3a36:
not long after, armorylog.txt hits this:
cpplog.txt:
This was once it went through a stable build/load. Half a dozen blocks came through once the txscan finished before.
Code:
-ERROR - 1470163647: (BDM_Server.cpp:637) caught isEmpty in Clients maintenance loop
not long after, armorylog.txt hits this:
Code:
*** Error in `./ArmoryDB': double free or corruption (fasttop): 0x00007f4398000990 ***
-INFO - 1470164078: (SocketObject.cpp:350) POLLIN recv return 0
cpplog.txt:
Code:
Log file opened at 1470158011: /home/user/.armory/armorycpplog.txt
-ERROR - 1470158308: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470158308: (SocketObject.cpp:139) POLLNVAL in writeToSocket
-ERROR - 1470158308: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470158740: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470158740: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470158740: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470159059: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470159059: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470160347: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470160347: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470160347: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470160367: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470160367: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161382: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161382: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161382: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161382: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161604: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161604: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-ERROR - 1470161604: (SocketObject.cpp:272) readFromSocketThread poll returned POLLNVAL, errnum: 0, errmsg: Success
-INFO - 1470164078: (SocketObject.cpp:350) POLLIN recv return 0
This was once it went through a stable build/load. Half a dozen blocks came through once the txscan finished before.
delete the content of your databases folder and try again
Then its back to the problem earlier where the DB crashes when Qt startsLet's go to IRC
delete the content of your databases folder and try again
show me the log output too
Code:
-INFO - 1470159382: (main.cpp:24) Running on 8 threads
-INFO - 1470159382: (main.cpp:25) Ram usage level: 4
-INFO - 1470159382: (BlockUtils.cpp:1247) blkfile dir: /media/andy/Data/Programs/Bitcoin/data
-INFO - 1470159382: (BlockUtils.cpp:1248) lmdb dir: /media/andy/Data/Data/bitcoin/ArmoryData/databases
-INFO - 1470159382: (lmdb_wrapper.cpp:389) Opening databases...
-INFO - 1470159382: (BlockUtils.cpp:1447) Executing: doInitialSyncOnLoad_Rescan
-INFO - 1470159382: (BitcoinP2P.cpp:725) Connected to Bitcoin node
-INFO - 1470159382: (lmdb_wrapper.cpp:389) Opening databases...
-INFO - 1470159382: (DatabaseBuilder.cpp:166) Reading headers from db
-WARN - 1470159382: (lmdb_wrapper.cpp:1203) No headers in DB yet!
-INFO - 1470159382: (DatabaseBuilder.cpp:199) Found 1 headers in db
-INFO - 1470159382: (DatabaseBuilder.cpp:49) updating HEADERS db
-DEBUG - 1470159382: (Blockchain.cpp:232) Organizing chain
-INFO - 1470159382: (DatabaseBuilder.cpp:53) updated HEADERS db in 0.000394s
-INFO - 1470159382: (DatabaseBuilder.cpp:103) scanning new blocks from #0 to #0
show me the log output too
Current top is 423333. Check your top block on Core first
Top block on core is right. Top block on armory is not.Time for rebuild & rescan.
Well that's not very helpful:
Code:
(gdb) bt
#0 0x000000000044095e in ?? ()
#1 0x0000000000000000 in ?? ()
Current top is 423333. Check your top block on Core first
Top block on core is right. Top block on armory is not.Time for rebuild & rescan.
Current top is 423333. Check your top block on Core first
Top block on core is right. Top block on armory is not.
Current top is 423333. Check your top block on Core first
DB isn't outputting any error. I'm assuming it is running just fine. You saying the clients isn't displaying the proper top block?
Yes.I think that these two lines:
Code:
-INFO - 1470145634: (DatabaseBuilder.cpp:199) Found 422936 headers in db
...
-INFO - 1470145637: (DatabaseBuilder.cpp:103) scanning new blocks from #422824 to #422823
Are a bit concerning. The latest top when I ran it was 423... and it is only scanning from 422823 to 422824.
DB isn't outputting any error. I'm assuming it is running just fine. You saying the clients isn't displaying the proper top block?
Start db individually, does it catch up?
No it does not catch up.Log file plz
dbLog.txt latest run:
Code:
Log file opened at 1470145631: /media/andy/Data/Data/bitcoin/ArmoryData/dbLog.txt
-INFO - 1470145631: (main.cpp:24) Running on 8 threads
-INFO - 1470145631: (main.cpp:25) Ram usage level: 4
-INFO - 1470145631: (BlockUtils.cpp:1247) blkfile dir: /media/andy/Data/Programs/Bitcoin/data
-INFO - 1470145631: (BlockUtils.cpp:1248) lmdb dir: /media/andy/Data/Data/bitcoin/ArmoryData/databases
-INFO - 1470145631: (lmdb_wrapper.cpp:389) Opening databases...
-INFO - 1470145631: (BlockUtils.cpp:1438) Executing: doInitialSyncOnLoad
-INFO - 1470145631: (DatabaseBuilder.cpp:166) Reading headers from db
-INFO - 1470145631: (BitcoinP2P.cpp:725) Connected to Bitcoin node
-INFO - 1470145634: (DatabaseBuilder.cpp:199) Found 422936 headers in db
-INFO - 1470145637: (DatabaseBuilder.cpp:49) updating HEADERS db
-DEBUG - 1470145637: (Blockchain.cpp:232) Organizing chain
-INFO - 1470145637: (DatabaseBuilder.cpp:53) updated HEADERS db in 0.059381s
-INFO - 1470145637: (DatabaseBuilder.cpp:103) scanning new blocks from #422824 to #422823
-INFO - 1470145637: (BlockchainScanner.cpp:51) no history to scan
-INFO - 1470145637: (BlockchainScanner.cpp:802) no SSH to scan
-INFO - 1470145637: (DatabaseBuilder.cpp:153) scanned new blocks in 0.000986s
-INFO - 1470145637: (DatabaseBuilder.cpp:157) init db in 5.32062s
-INFO - 1470145637: (BlockUtils.cpp:1549) Enabling zero-conf tracking
-INFO - 1470145689: (BDM_Server.cpp:573) registered bdv: 893de640c6ee895d17ff
-INFO - 1470145736: (BDM_Server.cpp:604) unregistered bdv: 893de640c6ee895d17ff
Start db individually, does it catch up?
No it does not catch up.Log file plz
Start db individually, does it catch up?
No it does not catch up. Sometimes I get this error:
Code:
Traceback (most recent call last):
File "/home/andy/bitcoin/BitcoinArmory/qtdialogs.py", line 1831, in accept
self.saveGeometrySettings()
File "/home/andy/bitcoin/BitcoinArmory/qtdialogs.py", line 1821, in saveGeometrySettings
self.main.writeSetting('WltPropGeometry', str(self.saveGeometry().toHex()))
File "ArmoryQt.py", line 2857, in writeSetting
self.settings.set(settingName, val)
File "/home/andy/bitcoin/BitcoinArmory/armoryengine/ArmoryUtils.py", line 3611, in set
self.writeSettingsFile()
File "/home/andy/bitcoin/BitcoinArmory/armoryengine/ArmoryUtils.py", line 3690, in writeSettingsFile
f.close()
IOError: [Errno 9] Bad file descriptor
Failing to write the settings file, although that's a python only error.
Quote
Also, I have had it running since yesterday but it seems like it isn't getting any new blocks even though Core is. And it doesn't update when I restart DB and Qt.
Start db individually, does it catch up?
Sometimes I get this error:
Also, I have had it running since yesterday but it seems like it isn't getting any new blocks even though Core is. And it doesn't update when I restart DB and Qt.
Code:
Traceback (most recent call last):
File "/home/andy/bitcoin/BitcoinArmory/qtdialogs.py", line 1831, in accept
self.saveGeometrySettings()
File "/home/andy/bitcoin/BitcoinArmory/qtdialogs.py", line 1821, in saveGeometrySettings
self.main.writeSetting('WltPropGeometry', str(self.saveGeometry().toHex()))
File "ArmoryQt.py", line 2857, in writeSetting
self.settings.set(settingName, val)
File "/home/andy/bitcoin/BitcoinArmory/armoryengine/ArmoryUtils.py", line 3611, in set
self.writeSettingsFile()
File "/home/andy/bitcoin/BitcoinArmory/armoryengine/ArmoryUtils.py", line 3690, in writeSettingsFile
f.close()
IOError: [Errno 9] Bad file descriptor
Also, I have had it running since yesterday but it seems like it isn't getting any new blocks even though Core is. And it doesn't update when I restart DB and Qt.
I've been starting to get syncing issues producing this error too:
Related to the change in getter method, presumably
Code:
-INFO - 1470133590: (SocketObject.cpp:338) POLLIN recv return 0
Related to the change in getter method, presumably
extra verbose for my debugging purposes.
I've been starting to get syncing issues producing this error too:
Related to the change in getter method, presumably
Code:
-INFO - 1470133590: (SocketObject.cpp:338) POLLIN recv return 0
Related to the change in getter method, presumably
Jump to: