arOpenCLMAX v0.1b - MAX coin OpenCL miner - Works with AMD, NVIDIA XPT - 1GH! - page 23.

smashyd

member

Activity: 66

Merit: 10

Can anyone give a little info on how to set this up? I cant figure out how to put in worker details, cheers

genoys

newbie

Activity: 39

Merit: 0

how can I mine solo ? Huh

Dukester797

newbie

Activity: 28

Merit: 0

Quote from: CrystalCoin on February 07, 2014, 12:22:19 PM

I'm mining, showing shares on ypool, but haven't gotten any max? just slow to update?

Yes. They were showing faster last night. Mine show about every 45 minutes now

CrystalCoin

member

Activity: 84

Merit: 10

I'm mining, showing shares on ypool, but haven't gotten any max? just slow to update?

archit

full member

Activity: 159

Merit: 100

Quote from: rizardus on February 07, 2014, 12:13:57 PM

no, after this error it didnt do nothing

and same when i try mine solo

Won't work solo it uses x.pushthrough

rizardus

member

Activity: 112

Merit: 10

no, after this error it didnt do nothing

and same when i try mine solo

archit

full member

Activity: 159

Merit: 100

Quote from: CrystalCoin on February 07, 2014, 12:09:16 PM

Quote from: archit on February 07, 2014, 12:07:25 PM

Quote from: CrystalCoin on February 07, 2014, 12:00:33 PM

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

any other parameters I can run to get higher?
the usage on the cards are only like 85%

Will do in future version

Quote from: rizardus on February 07, 2014, 12:09:37 PM

archit

can u give us a miner that can by used on another pools?

This should work on 1gh

rizardus

member

Activity: 112

Merit: 10

archit

can u give us a miner that can by used on another pools?

CrystalCoin

member

Activity: 84

Merit: 10

Quote from: archit on February 07, 2014, 12:07:25 PM

Quote from: CrystalCoin on February 07, 2014, 12:00:33 PM

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

any other parameters I can run to get higher?
the usage on the cards are only like 85%

archit

full member

Activity: 159

Merit: 100

Quote from: kendle on February 07, 2014, 12:05:12 PM

Quote from: CrystalCoin on February 07, 2014, 12:00:33 PM

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?

So if I want to run both my cards should I be placing "-d 0,1" into my startup line, or does it automatically start all available devices?

-d 0,1

archit

full member

Activity: 159

Merit: 100

Quote from: CrystalCoin on February 07, 2014, 12:00:33 PM

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

kbhutto

sr. member

Activity: 1288

Merit: 250

PredX - AI-Powered Prediction Market

Payouts on ypool are extremely low..........on 1GH with 1/3 speed (CPU) I am getting much better payouts.

kendle

member

Activity: 99

Merit: 10

Quote from: CrystalCoin on February 07, 2014, 12:00:33 PM

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?

So if I want to run both my cards should I be placing "-d 0,1" into my startup line, or does it automatically start all available devices?

CrystalCoin

member

Activity: 84

Merit: 10

Quote from: archit on February 07, 2014, 11:58:33 AM

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

archit

full member

Activity: 159

Merit: 100

Quote from: CrystalCoin on February 07, 2014, 11:56:41 AM

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║ arOpenCLMAX(v0.1a) ║
║ author: archit,jh00 and little help from girino ║
║ http://ypool.net ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds

not working?

the x's are just blocking my stuff.

YPool is having some trouble recently

dspair

sr. member

Activity: 266

Merit: 250

HD6970 and R9 280x: 272500kh/s
Don't know if it's good or not.

Delivereath

full member

Activity: 148

Merit: 100

Quote from: archit on February 07, 2014, 11:56:33 AM

Quote from: Delivereath on February 07, 2014, 11:55:46 AM

What is this "DeveloperFeeEntry" ?

It's the fee setting but YPool doesn't support it yet for MAX.

And what would be the amount of the fee ?

Sparkzor

member

Activity: 112

Merit: 10

Both ypool and 1gh is down atm.
Probably DDOS...

rizardus

member

Activity: 112

Merit: 10

Quote from: archit on February 07, 2014, 11:55:12 AM

Quote from: rizardus on February 07, 2014, 11:53:21 AM

Quote from: JuanHungLo on February 07, 2014, 11:51:41 AM

Quote from: tomass on February 07, 2014, 11:50:28 AM

Got 172000 kH/s but after 15 min just 0.08 MaxCoin Sad

I dont think it works correct. With my CPU after 1.5 hour I had 0.2 MaxCoin

I agree. Is there any other pool that this miner will work with?

like i said when 1gh pool work i get much more coins with my 660gtx than on ypool with my 13 r9 280x - something isnt right here (this is like 12x more hash than my gtx)

and no u cant mine in another pool cause u get error with "no fee for developer"

About the other pool that maybe true. But nothing comes to me and what is your reject percentage?

from miner? on my one machine it something like : 3090 /3040

archit

full member

Activity: 159

Merit: 100

Quote from: atleticofa on February 07, 2014, 11:55:59 AM

But the problem is ypool I guess.. Should be possible use this for another pool dev?

Well, try 1gh xpt port

Topic: arOpenCLMAX v0.1b - MAX coin OpenCL miner - Works with AMD, NVIDIA XPT - 1GH! - page 23. (Read 39054 times)