Topic: ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT - page 52. (Read 138636 times)
April 29, 2013, 01:44:41 AM
2@37
April 29, 2013, 01:37:07 AM
yes, john you are correct. it looks like my carelessness has killed the bot. I will await your update and I will ONLY post EXACTLY the way that you tell me from now on. just for the record i should only have ten units bid for up there and five should be the first units bid at thirty six and five should be at thirty five spot five. sorry for killing the poor thing.
April 29, 2013, 01:31:48 AM
If you're writing about problems with the bot it might be a good idea to spell out your bids instead of pasting the actual bids; so you hopefully won't confuse the bot further.
Makes sense - the bit maker should've provided me a kill switch in this case 
BOTKILL!
PS: Ignore the bot for now - it's going nuts. I'll delete its posts that are wrong.
What if the bot have become self-aware? Are you John Connor?
April 29, 2013, 01:31:15 AM
So tempted to post a list of compuserve email addresses in here...
April 29, 2013, 01:25:01 AM
1@38
April 29, 2013, 01:24:17 AM
If you're writing about problems with the bot it might be a good idea to spell out your bids instead of pasting the actual bids; so you hopefully won't confuse the bot further.
Makes sense - the bit maker should've provided me a kill switch in this case BOTKILL!
PS: Ignore the bot for now - it's going nuts. I'll delete its posts that are wrong.
April 29, 2013, 01:22:44 AM
If you're writing about problems with the bot it might be a good idea to spell out your bids instead of pasting the actual bids; so you hopefully won't confuse the bot further.
April 29, 2013, 01:22:33 AM
keep the bids coming guys - John the bot will be in service soon ! April 29, 2013, 01:20:58 AM
Well, it's not my bot. 
The bot captures the specific words @ and the numbers to automatically constitute the bid. Your last post might've messed up the code altogether I guess, with so many 'bids' popping up in your sentence. I'll be home soon and provide a clear and updated list.
understood. do not want to mess things up but on the bright side, it is good to have someone like me with fat fingers so you can see the problems early on instead of in the last minutes.The bot captures the specific words @ and the numbers to automatically constitute the bid. Your last post might've messed up the code altogether I guess, with so many 'bids' popping up in your sentence. I'll be home soon and provide a clear and updated list.
Now, if people would just stop bidding and let the auction close as it stands now, we all could be happy.
April 29, 2013, 01:18:11 AM
Well, it's not my bot.
The bot captures the specific words @ and the numbers to automatically constitute the bid. Your last post might've messed up the code altogether I guess, with so many 'bids' popping up in your sentence. I'll be home soon and provide a clear and updated list.
The bot captures the specific words @ and the numbers to automatically constitute the bid. Your last post might've messed up the code altogether I guess, with so many 'bids' popping up in your sentence. I'll be home soon and provide a clear and updated list.
April 29, 2013, 01:14:02 AM
Well, you should put both active bids together as the old bids are automatically cancelled. Never include the bid you're canceling - the bot cannot determine if you're canceling it or not.
sorry. do not understand your bot code.but.
if i bid 5@ 35.5 which i did, it should have knocked off the 5 @ 34.5 since they only had 4 still active which would have left me with the 5 @ 36 and the 5 @ 35.5
I believe you have said before that you CANNOT lower your bid which is basically what the bot tried to do with my last bid no?
Not trying to be a pain, just trying to help.
April 29, 2013, 01:08:31 AM
Well, you should put both active bids together as the old bids are automatically cancelled. Never include the bid you're canceling - the bot cannot determine if you're canceling it or not.
April 29, 2013, 01:04:29 AM
April 29, 2013, 01:03:14 AM
What kind of powersupply you need? When I look at the pictures I do not see a normal AC/DC power jack plug or a standard Molex connector. So what kind of PCB connector is used on the blade for the distribution of the 10A 12V DC power?
April 29, 2013, 12:56:39 AM
5 @ 35.5 to replace bid of 5 @ 34.5
April 29, 2013, 12:55:06 AM
No need to post a sum or something - just a simple x(@)y will do to avoid confusing the poor bot.
Would you open source the bot? Seems like interesting code.
John makes enough off this community so that 'bot' is probably code for internsittinginthecupboardinthedark.
Haha nice
I barely make enough to hire myself as the internsittinginthedarkcupboard. =p
*munches on stale bread and cat food*
Ah, the dinner of kings
April 29, 2013, 12:41:08 AM
April 29, 2013, 12:29:31 AM
Notice: This is beta software. Bidders, please make sure your bid makes it to the table and is accurate.
Countdown (courtesy of JaredR26)
Timer removed. End time: 2013-04-29+13:25:32
| Name | Quantity | Price (฿) | Remaining | BTC Count |
| swaits | 1 | 40.5 | 49 | 40.50 |
| VJain | 1 | 40 | 48 | 40.00 |
| psjw4450 | 4 | 40 | 44 | 160.00 |
| GreatBug | 1 | 40 | 43 | 40.00 |
| Hiroaki | 1 | 39 | 42 | 39.00 |
| simtel12 | 1 | 38 | 41 | 38.00 |
| gsmline | 1 | 38 | 40 | 38.00 |
| win07 | 1 | 37.5 | 39 | 37.50 |
| Hiroaki | 1 | 37 | 38 | 37.00 |
| Omen1855 | 3 | 36.5 | 35 | 109.50 |
| Minor Miner | 5 | 36 | 30 | 180.00 |
| samyrp | 2 | 36 | 28 | 72.00 |
| desired_username | 4 | 36 | 24 | 144.00 |
| BitMagnet | 1 | 35.5 | 23 | 35.50 |
| dogie | 2 | 35.5 | 21 | 71.00 |
| drlatino999 | 2 | 35.5 | 19 | 71.00 |
| Hiroaki | 2 | 35.5 | 17 | 71.00 |
| sgrunger | 2 | 35.5 | 15 | 71.00 |
| JayCoin | 1 | 35 | 14 | 35.00 |
| lan787 | 1 | 35 | 13 | 35.00 |
| scrybe | 1 | 35 | 12 | 35.00 |
| Luke-Jr | 1 | 35 | 11 | 35.00 |
| plasmoske | 1 | 35 | 10 | 35.00 |
| tccd | 2 | 35 | 8 | 70.00 |
| WinTame2012 | 1 | 35 | 7 | 35.00 |
| Ajay | 2 | 34.5 | 5 | 69.00 |
| ok | 1 | 34.5 | 4 | 34.50 |
| Minor Miner | 4 ( 5 ) | 34.5 | 0 | 138.00 |
| Total blades: | 50 | Total BTC: | 1816.50 |
Countdown (courtesy of JaredR26)
Timer removed. End time: 2013-04-29+13:25:32
April 29, 2013, 12:17:49 AM
1@35
April 29, 2013, 12:17:40 AM
Hey All,
I know this has been posted a few times and in the original auction but I just want to seek a clear answer on it.
Is the rack mountable case available too?
as seen in this picture http://imgur.com/a/PkOcu#4
Thanks
I know this has been posted a few times and in the original auction but I just want to seek a clear answer on it.
Is the rack mountable case available too?
as seen in this picture http://imgur.com/a/PkOcu#4
Thanks
If you mean the metal rack, it's not for sale.
Thanks John.
Jump to: