asicminer v2 blade issue | Bitcointalksearch.org

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: sidehack on November 30, 2013, 04:50:46 AM

You might consider seeking a warranty replacement from where you bought it from, or talk to FriedCat. Not sure what their policy is on hardware issues, but I think shipping with an entire bank of chips down is grounds for a replacement already.

The general policy is this would be a warranty replacement. One or two chips is okay but a bank would be faulty as there is no way to modify the blade to improve. An alternative you could suggest is to get a reduced price on either this blade or a new one.

Remember to put future support requests via the support thread where there are lots of people with the same hardware who can help: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

sidehack

legendary

Activity: 3346

Merit: 1858

Curmudgeonly hardware guy

You might consider seeking a warranty replacement from where you bought it from, or talk to FriedCat. Not sure what their policy is on hardware issues, but I think shipping with an entire bank of chips down is grounds for a replacement already.

ijchan223

newbie

Activity: 14

Merit: 0

i guess it is just a hardware issue just hooked it up to bfgminer and only reporting errors not hashing at all, kinda odd because the proxy was accepting everything. guess i will sell it on ebay to try to get some money back

sidehack

legendary

Activity: 3346

Merit: 1858

Curmudgeonly hardware guy

Okay, that is strange. Reckon it's a credentials issue or something with the pool?

ijchan223

newbie

Activity: 14

Merit: 0

that is exactly what i typed in to the cmd line .

on the blade it says 99.8 % and 9GHS

what i don't get is if it is a bad packet why isn't that going up on the site. it worked for a couple of minutes when i set it up the other day.

sidehack

legendary

Activity: 3346

Merit: 1858

Curmudgeonly hardware guy

What did you type in the command line when you ran the proxy? Did you specify a pool? You're gonna want something like

mining_proxy.exe -o mint.bitminter.com -p 3333 -gp 8332

If you don't specify a pool in the command line, it defaults to slush.

What hashrate, shares per minute, and efficiency are reported on the blade config?

ijchan223

newbie

Activity: 14

Merit: 0

i guess the issue isn't fixed like i hoped i have it running on a mining proxy and it seems to be running well but bitminter hasn't revived any shares at all.

http://i146.photobucket.com/albums/r262/ertgunner/Capture_zps43d61682.png

ijchan223

newbie

Activity: 14

Merit: 0

well, i may have gotten it fixed, it is hashing away at 8000m hash /s however bitminter is showing that i am doing less than 1G-hash/s

may need to reconfigure something

sidehack

legendary

Activity: 3346

Merit: 1858

Curmudgeonly hardware guy

Good to hear you got it working.

ijchan223

newbie

Activity: 14

Merit: 0

what i was doing wrong was clicking on the exe instead of running it from the command prompt.

need to add the argument on the same line to keep the program from autorunning

J_Dubbs

sr. member

Activity: 322

Merit: 250

Quote from: Doff on November 28, 2013, 01:11:41 AM

I thought the port for Stratum on Bitminter was 3333? Those look like the ports for Non-Asic devices you have in your config there. I don't know anything about the asicminer v2 blade so maybe Im wrong.

Yeah here we go right on the main page. Connect to stratum+tcp://mint.bitminter.com:3333 (Stratum) or http://mint.bitminter.com:8332 (GBT or getwork).

Does the asicminer v2 use GBT or getwork? that cant be right.

Getwork, which is why I don't think 3333 works directly in the blade confit, but the proxy you point it at goes through 3333. All I use is Slush's (so far), not sure how other pools work...

ijchan223

newbie

Activity: 14

Merit: 0

thankyou very much , got it working.

ijchan223

newbie

Activity: 14

Merit: 0

i have changed it and it will not work correctly without a proxy in between it

Doff

sr. member

Activity: 327

Merit: 250

Quote from: ijchan223 on November 28, 2013, 01:24:07 AM

i know i am doing it incorrectly but i can't figure out how to set up the proxy from the file provided by slush

it says ""If you want to connect to another pool or change other proxy settings, type "mining_proxy.exe --help" in console window.""

can't seem to get it to work maybe i am retarded don't know much about programming

It looks like you just need to change the port in that web Interface to 3333 and you are good to go, but again I just know nothing about the asicminer v2.

ijchan223

newbie

Activity: 14

Merit: 0

i know i am doing it incorrectly but i can't figure out how to set up the proxy from the file provided by slush

it says ""If you want to connect to another pool or change other proxy settings, type "mining_proxy.exe --help" in console window.""

can't seem to get it to work maybe i am retarded don't know much about programming

Doff

sr. member

Activity: 327

Merit: 250

I thought the port for Stratum on Bitminter was 3333? Those look like the ports for Non-Asic devices you have in your config there. I don't know anything about the asicminer v2 blade so maybe Im wrong.

Yeah here we go right on the main page. Connect to stratum+tcp://mint.bitminter.com:3333 (Stratum) or http://mint.bitminter.com:8332 (GBT or getwork).

Does the asicminer v2 use GBT or getwork? that cant be right.

ijchan223

newbie

Activity: 14

Merit: 0

how do you change the flags, when i open the program it just runs can't pause it or anything

i am using the EXE file from :

Quote

http://mining.bitcoin.cz/mining-proxy-howto

sidehack

legendary

Activity: 3346

Merit: 1858

Curmudgeonly hardware guy

If you download their stratum proxy software, it runs in command line with flags to point it at different pools:

mining_proxy.exe -o stratumpool -p stratumport -gp listenport

The server address of your blade will be the IP of whatever machine you are running the stratum proxy on. -gp specifies which port the proxy will listen for getwork requests - in the case of your blade, it's set to operate on port 8332 so specifying that in the command line should light it up.

ijchan223

newbie

Activity: 14

Merit: 0

can't figure out what is wrong with the lane but i swapped pools and it solved the appears that the bitminter pool need a proxy , can't figure out how to do it. so i am back on slush for now

ijchan223

newbie

Activity: 14

Merit: 0

it seems to reset after about every 3 to 4 minutes but i don't think cooling is a issue, there is 3 120mm fans on it. and don't feel too warm.

but after each restart it only goes up to 200 m hash a sec. to me it is seems like a power supply issue, but i can't seem to fine the falty item, pulled components off and soldered them in its borther's place but the issue hasn't moved so a little lost here.

Topic: asicminer v2 blade issue (Read 1202 times)