Try putting only one graphics card directly in the x16 slot and see if it boots.
Right now not at my mining place. Ill try it tomorrow/today.
I readed now threw other forums and now i maybe have 2 solutions.
1) CPU Fan is connected to the chassisfan connector
(Does the ASRock H110 Pro BTC+ not start if no CPU fan is connected?)
2) I only have a 4 pin connector for the 8 pin slot.
Maybe is it possible that ive connected the 4 pin connecter on slot 5-8 and not to 1-4
Does the ASRock
H110 Pro BTC+ not start if no CPU fan is connected?
Why would you connect it to the chasis fan? You need to connnect the CPU fan to the CPU fan connector. You also need to connect the 8-pin CPU power connector from the PSU to the CPU power connector on the motherboard.
Sure. Well i was tired. I know now i put the cpu fan to the chassis fan connector. Is it possible that this is the reason why i get no signal?
The 8 pin CPU power connector is also possible to power it with a 4 pin power connector, its written like that in the user manual.
More than likley. If the motherboard can detect the CPU fan speed, it won't boot to prevent damage from overheating to the CPU. I don't know you could connect it to the chasis fan since it's on the other side of the motherboard and the CPU fan cable won't reach that far.
Ok good to hear. Unfortunately the chassis fan connector is really close to the cpu fan connector only on the other site of the cpu.
If you look at that image.
https://imgur.com/a/P7A4b
