BUMP! 9 Glass bell available!
One as been just sold in auction at scarce.city!
Send a DM or reply here for your customized collectible!!!
Topic: [AVAILABLE!] GBG Block Erupter “Glass bell” - 09/11 available (Read 616 times)
BUMP! Still available, still ready to be "printed". Send a DM or reply here for your customized collectible!
https://bitcointalksearch.org/topic/m.61756816
https://bitcointalksearch.org/topic/m.61756816
BUMP!
BUMP 09 pieces available! Place your order here or in DM!
premise, there will be many photos ... 
here you can see piece 00/10 birth!
Actually 08 are still available! Block Erupter series will be emitted in max 11 items.
Send a message here or in private if you want reserve your collectible!
We are planning also other initiatives in order to spread "TX_CERT a new protocol to certify a collectible using bitcoin network" so ... stay tuned
it all starts with plastic spools for 3d printer ...
the base takes shape (this layer is printed with plastic that reacts to the luminescent wood lamp...)
the printing of the red part of the base starts
excess plastic is removed
this is what a base printed with plastic that reacts to wood's lamp looks like!
this is what a user gets!
A bell, a block erupter (used but still working!) and a 3D printed base "branded" with your favorite btc address
here is the transaction on blockchain! anyone can forge it, copy it, etc etc but only this original piece implements the new certification system described by @gbianchi in this topic.
https://blockchair.com/bitcoin/transaction/c143e12484a975f4ba1fcc655dda1e864b3a545b0cfa37cfc65f17efc8d82f28
...
only 1 can be passed on to the next owner using blockchain!
here you can see piece 00/10 birth!Actually 08 are still available! Block Erupter series will be emitted in max 11 items.
Send a message here or in private if you want reserve your collectible!
We are planning also other initiatives in order to spread "TX_CERT a new protocol to certify a collectible using bitcoin network" so ... stay tuned
it all starts with plastic spools for 3d printer ...
the base takes shape (this layer is printed with plastic that reacts to the luminescent wood lamp...)
the printing of the red part of the base starts
excess plastic is removed
this is what a base printed with plastic that reacts to wood's lamp looks like!
this is what a user gets!
A bell, a block erupter (used but still working!) and a 3D printed base "branded" with your favorite btc address
here is the transaction on blockchain! anyone can forge it, copy it, etc etc but only this original piece implements the new certification system described by @gbianchi in this topic.
Code:
TX_CERT,GBG,Block Erupter 1,00/10
...
only 1 can be passed on to the next owner using blockchain!
GBG Block Erupter “Glass bell” - 09/11 available - SHIP FROM MARCH!
(Block erupters are originals, used, but ...still working
)
Photos of item 00/10 Will be posted following during next days, including certification.
https://bitcointalksearch.org/topic/m.61756816
How It works TX_CERT? Check this topic!
Feel free to leave here a message or send a MP to reserve your item!
(Block erupters are originals, used, but ...still working
)Photos of item 00/10 Will be posted following during next days, including certification.
https://bitcointalksearch.org/topic/m.61756816
How It works TX_CERT? Check this topic!
Feel free to leave here a message or send a MP to reserve your item!
legendary
Activity: 2506
Merit: 3235
The Stone the masons rejected was the cornerstone.
Very nicely done...it does the miner justice to display in this fashion!
Good luck with the sales BitBollo!
Good luck with the sales BitBollo!
BUMP!
New pictures of item 00/10 will be available soon!
Place here your PRE-ORDER for a one-of-a-kind of this new bitcoin-theme collectible!!!
New pictures of item 00/10 will be available soon!
Place here your PRE-ORDER for a one-of-a-kind of this new bitcoin-theme collectible!!!
awesome concept 
How does the new system work?
Each collectible (each glass-bell) is provided with a public address printed directly on the item! This public address is provided directly from the buyer.
With this system, the collector owns the private key (of course) and in case s/he wants to sell the item he is required to prove the ownership by signing a message.
This address will be loaded by the producer. Transaction used for load will contain in OP_RETURN the basic information about the collectibles (we will see in the next post all these steps in detail).
All items loaded by producer can be checked at this address: 1GBG1boyVmsdpqsfYHhY1mbDKdZ7TGKrEw
Only 00/10 has been loaded with tBTC and can be verified here: mfxNrbFyANf2tuppL9f2v78kKT3ooV69eT
https://blockstream.info/testnet/tx/63831e97d33af308e02bbdbb50eeeac4b828e5af3559139f0d6e3fd8a8baa7d7?expand
If the original owner of the item decides to sell, first of all... he must be able to sign a message to confirm he owns the private key. . At this point new buyer could conclude the transaction (always escrow is recommended)
Once received by the new owner, the original owner will send the amount of btc to the address provided by the new buyer!
Using blockchain explorer that allow to check OP_RETURN functions it will become possible explore the previous passage and verify the owners of the item.
Passages of properties between customers take place through btc normal transactions!
To avoid any kind of fraud (in general not only applied to this item) a paper certificate is provided.
Each item has been printed with a small layer UV and the original address is printed on the item.
In any case, only the owner (or subsequent owner) of this bitcoin could be confirm to have the original ITEM!
edit: producer address update... sorry for this mistake...
Each collectible (each glass-bell) is provided with a public address printed directly on the item! This public address is provided directly from the buyer.
With this system, the collector owns the private key (of course) and in case s/he wants to sell the item he is required to prove the ownership by signing a message.
This address will be loaded by the producer. Transaction used for load will contain in OP_RETURN the basic information about the collectibles (we will see in the next post all these steps in detail).
All items loaded by producer can be checked at this address: 1GBG1boyVmsdpqsfYHhY1mbDKdZ7TGKrEw
Only 00/10 has been loaded with tBTC and can be verified here: mfxNrbFyANf2tuppL9f2v78kKT3ooV69eT
https://blockstream.info/testnet/tx/63831e97d33af308e02bbdbb50eeeac4b828e5af3559139f0d6e3fd8a8baa7d7?expand
If the original owner of the item decides to sell, first of all... he must be able to sign a message to confirm he owns the private key. . At this point new buyer could conclude the transaction (always escrow is recommended)
Once received by the new owner, the original owner will send the amount of btc to the address provided by the new buyer!
Using blockchain explorer that allow to check OP_RETURN functions it will become possible explore the previous passage and verify the owners of the item.
Passages of properties between customers take place through btc normal transactions!
To avoid any kind of fraud (in general not only applied to this item) a paper certificate is provided.
Each item has been printed with a small layer UV and the original address is printed on the item.
In any case, only the owner (or subsequent owner) of this bitcoin could be confirm to have the original ITEM!
edit: producer address update... sorry for this mistake...
00 - RESERVED
01 - available
02 - available
03 - available
04 - available
05 - available
06 - available
07 - available
08 - available
09 - available
10 - available
01 - available
02 - available
03 - available
04 - available
05 - available
06 - available
07 - available
08 - available
09 - available
10 - available
[PRE-ORDER] GBG Block erupter “Glass bell” - A new one of kind bitcoin theme collectible
@gbianchi and me @bitbollo are delighted to present a new bitcoin theme collectible called:
(two images taken from the test... yes we have tried to realize an "antminer" version not for sell on this topic )
Essentially, as you can see from the photo, this is a glass bell, with a base printed in 3d.
The base has a layer printed with UV filament! See below images of production and base produced...
Inside the bell, there is a precious “ASIC Minerblock erupter USB” that is part of our forum and part of the history of bitcoin mining. These are still working! But of course we suggest to not use for mining etc etc...
Each item will be linked to a public key (address loaded by the seller with 0,001 btc) and it will be accompanied by a paper certificate.
Moreover, what is “new”... we have implemented a system that allows users to track ownership of this item by using blockchain and OP_Return function: for this step please check the this topic with all details.
Starting from today, we are collecting pre-orders for this item. Only 11 items would be initially realized and released in the “First series”.
Please note only 0811 items are available! Book your favorite number !
Base would be printed in green or red + a small layer reacting to UV !
[Of course, if there is “enough” interest by collectors we can implement in the future a second series or even produce “glass bell” also for other collectibles...just send a DM or reply here]
Price of collectible = 0.01 BTC [loaded with 0.001 btc]
Shipment will be done starting from MARCH 2023 ---> Items will be shipped from ITALY (EU)
(Fees to be payed by buyer)
Price for shipment in EU/UK/Emirates/Philippine/Morocco = 40 euro
Price for shipment USA/Japan/Brasil/Argetina = 45 euro
Price for shipment in Russia/Australia/ASIA/Perù = 50 euro
Price for shipment Oceania/Uruguay = 60 euro
Payment are accepted only in bitcoin on this address: bc1qm9wnwsgy52jdefvm5g4w72lxqep5d9ks4gq62p
Escrow available at buyer expense.
@gbianchi and me @bitbollo are delighted to present a new bitcoin theme collectible called:
“GBG Block Erupter”
(two images taken from the test... yes we have tried to realize an "antminer" version
not for sell on this topic )Essentially, as you can see from the photo, this is a glass bell, with a base printed in 3d.
The base has a layer printed with UV filament! See below images of production and base produced...
Inside the bell, there is a precious “ASIC Minerblock erupter USB” that is part of our forum and part of the history of bitcoin mining. These are still working! But of course we suggest to not use for mining etc etc...
Each item will be linked to a public key (address loaded by the seller with 0,001 btc) and it will be accompanied by a paper certificate.
Moreover, what is “new”... we have implemented a system that allows users to track ownership of this item by using blockchain and OP_Return function: for this step please check the this topic with all details.
Starting from today, we are collecting pre-orders for this item. Only 11 items would be initially realized and released in the “First series”.
Please note only 08
Base would be printed in green or red + a small layer reacting to UV !
[Of course, if there is “enough” interest by collectors we can implement in the future a second series or even produce “glass bell” also for other collectibles...just send a DM or reply here]
Price of collectible = 0.01 BTC [loaded with 0.001 btc]
Shipment will be done starting from MARCH 2023 ---> Items will be shipped from ITALY (EU)
(Fees to be payed by buyer)
Price for shipment in EU/UK/Emirates/Philippine/Morocco = 40 euro
Price for shipment USA/Japan/Brasil/Argetina = 45 euro
Price for shipment in Russia/Australia/ASIA/Perù = 50 euro
Price for shipment Oceania/Uruguay = 60 euro
Payment are accepted only in bitcoin on this address: bc1qm9wnwsgy52jdefvm5g4w72lxqep5d9ks4gq62p
Escrow available at buyer expense.
Jump to: