Author

Topic: Avalon ASIC users thread - page 122. (Read 438516 times)

hero member
Activity: 826
Merit: 1001
July 11, 2013, 12:22:43 PM
Warning, shameless self promotion Grin

Since so many are struggling with the HW% calculation, I created a small mod: https://bitcointalksearch.org/topic/m.2706346

thx
Code:
Change the = hw that you see into = mhw
does this mean milli (m)?

No, m is short for my Wink
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 12:11:37 PM
Warning, shameless self promotion Grin

Since so many are struggling with the HW% calculation, I created a small mod: https://bitcointalksearch.org/topic/m.2706346

thx
Code:
Change the = hw that you see into = mhw
does this mean milli (m)?
hero member
Activity: 826
Merit: 1001
July 11, 2013, 12:07:20 PM
Warning, shameless self promotion Grin

Since so many are struggling with the HW% calculation, I created a small mod: https://bitcointalksearch.org/topic/m.2706346
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 11:41:55 AM
so after ~3 hours it's tilt again
here's the cgminer.log:
Code:
[Firmware Version] => 20130703
cgminer-a011fe5
luci-d854edc+
cgminer-openwrt-packages-800cc58
Reply was 'STATUS=S,When=1373556046,Code=70,Msg=CGMiner stats,Description=cgminer 3.3.1|STATS=0,ID=AVA0,Elapsed=158,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=24,asic_count=10,timeout=42,frequency=300,fan1=0,fan2=0,fan3=0,temp1=0,temp2=0,temp3=0,temp_max=0,no_matching_work=0,match_work_count1=0,match_work_count2=0,match_work_count3=0,match_work_count4=0,match_work_count5=0,match_work_count6=0,match_work_count7=0,match_work_count8=0,match_work_count9=0,match_work_count10=0,match_work_count11=0,match_work_count12=0,match_work_count13=0,match_work_count14=0,match_work_count15=0,match_work_count16=0,match_work_count17=0,match_work_count18=0,match_work_count19=0,match_work_count20=0,match_work_count21=0,match_work_count22=0,match_work_count23=0,match_work_count24=0,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000|STATS=1,ID=POOL0,Elapsed=158,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=1.00000000,Max Diff=16.00000000,Min Diff Count=100,Max Diff Count=1230,Times Sent=2,Bytes Sent=138,Times Recv=8,Bytes Recv=5052,Net Bytes Sent=138,Net Bytes Recv=5052|STATS=2,ID=POOL1,Elapsed=158,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=1328,Max Diff Count=1328,Times Sent=3,Bytes Sent=196,Times Recv=11,Bytes Recv=7880,Net Bytes Sent=196,Net Bytes Recv=7880|STATS=3,ID=POOL2,Elapsed=158,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1373556046
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 3.3.1
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AVA0
   [Elapsed] => 158
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [baud] => 115200
   [miner_count] => 24
   [asic_count] => 10
   [timeout] => 42
   [frequency] => 300
   [fan1] => 0
   [fan2] => 0
   [fan3] => 0
   [temp1] => 0
   [temp2] => 0
   [temp3] => 0
   [temp_max] => 0
   [no_matching_work] => 0
   [match_work_count1] => 0
   [match_work_count2] => 0
   [match_work_count3] => 0
   [match_work_count4] => 0
   [match_work_count5] => 0
   [match_work_count6] => 0
   [match_work_count7] => 0
   [match_work_count8] => 0
   [match_work_count9] => 0
   [match_work_count10] => 0
   [match_work_count11] => 0
   [match_work_count12] => 0
   [match_work_count13] => 0
   [match_work_count14] => 0
   [match_work_count15] => 0
   [match_work_count16] => 0
   [match_work_count17] => 0
   [match_work_count18] => 0
   [match_work_count19] => 0
   [match_work_count20] => 0
   [match_work_count21] => 0
   [match_work_count22] => 0
   [match_work_count23] => 0
   [match_work_count24] => 0
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 158
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 16.00000000
   [Min Diff] => 1.00000000
   [Max Diff] => 16.00000000
   [Min Diff Count] => 100
   [Max Diff Count] => 1230
   [Times Sent] => 2
   [Bytes Sent] => 138
   [Times Recv] => 8
   [Bytes Recv] => 5052
   [Net Bytes Sent] => 138
   [Net Bytes Recv] => 5052
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 158
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 16.00000000
   [Min Diff] => 16.00000000
   [Max Diff] => 16.00000000
   [Min Diff Count] => 1328
   [Max Diff Count] => 1328
   [Times Sent] => 3
   [Bytes Sent] => 196
   [Times Recv] => 11
   [Bytes Recv] => 7880
   [Net Bytes Sent] => 196
   [Net Bytes Recv] => 7880
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 158
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)
I think it's better to limit it to ~330 MHs[/code]
legendary
Activity: 1764
Merit: 1002
July 11, 2013, 10:30:07 AM
so now it has run for ~2.5h and gone to 346 MHs



but HW is 2144 (thats 11.xx%)


I think that is much to much or?


no, HW error is 1.46%  Cheesy

everything else looks good except Temp2 which is malfunctioning.  looks like your sensor is bad.
legendary
Activity: 1112
Merit: 1000
July 11, 2013, 10:29:10 AM
so now it has run for ~2.5h and gone to 346 MHs

http://imageshack.us/a/img189/5940/dalf.png

but HW is 2144 (thats 11.xx%)

http://imageshack.us/a/img196/5655/1qwz.png
I think that is much to much or?

It's fine if you calculate it correctly ;-)


Quote
The correct formula to calculate HW% (with cgminer fieldnames) is: 100 * HW / (diff1shares + HW)
sr. member
Activity: 302
Merit: 252
July 11, 2013, 10:27:59 AM
you have to set HW in relation to Diff1Shares
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 10:20:01 AM
so now it has run for ~2.5h and gone to 346 MHs



but HW is 2144 (thats 11.xx%)


I think that is much to much or?
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 07:37:40 AM
a few hours later it happened again
warm reboot does not solve the problem
all 0,00
only a switch off, wait 20 sec and switch on again helped...

Can you post what the Status -> Cgminer API log shows at that point?
ok, 2 hours later the same...
I think in a few hours it is coming again, then I will try to copy/paste Cgminer API log
sr. member
Activity: 397
Merit: 500
July 11, 2013, 07:29:03 AM
Actually all zeroes indicates cgminer never started. There is a problem somewhere in your options.

I'm confused, if the cgminer never started (or if it gets killed for some reason), doesn't the

Status -> Cgminer API log tab

only show these lines:

Code:
[Firmware Version] => 20130703
cgminer-a011fe5
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused

and the

Status -> Cgminer Status tab

show the empty fields with "This section contains no values yet" in stead of the 0 filled fields?
If you have this output, cgminer is not running.

The cron job runs every 2min and check the shares submitted, if there is no change in 2min then cgminer gets killed and started again.
Make sure your pool diff is not to high <200 so that your avalon (cgminer) can submit a share in these 2min (variance). Make sure your pool works.

I had also problems with the timeout. If it was to low, then cgminer stopped working and only a power off helped. When I used 36:355 it worked without that problem, but with some more rejects which is better then a non working unit.
To change this, you can try edit "/etc/init.d/cgminer". There is a timeout calculation "12xxx / Mhz", you have to increase it and deactivate the auto clock. If you use auto clock the divider is changed by cgminer avalon-driver back to it's default, so the edit in this file will not work with --avalon-auto.



legendary
Activity: 1112
Merit: 1000
July 11, 2013, 06:54:36 AM
Actually all zeroes indicates cgminer never started. There is a problem somewhere in your options.

I'm confused, if the cgminer never started (or if it gets killed for some reason), doesn't the

Status -> Cgminer API log tab

only show these lines:

Code:
[Firmware Version] => 20130703
cgminer-a011fe5
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused

and the

Status -> Cgminer Status tab

show the empty fields with "This section contains no values yet" in stead of the 0 filled fields?
legendary
Activity: 1112
Merit: 1000
July 11, 2013, 06:50:00 AM
a few hours later it happened again
warm reboot does not solve the problem
all 0,00
only a switch off, wait 20 sec and switch on again helped...

Can you post what the Status -> Cgminer API log shows at that point?
sr. member
Activity: 388
Merit: 250
July 11, 2013, 05:31:09 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares
cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?
TIA
Remove all the --avalon options, set a Chip Frequency(for example 282) and try again. I also have a silver Avalon that doesn't like the new --avalon options. No idea why, I don't have much time to investigate so I have it hashing at 282Mhz.

Have you flashed the TP-LINK to the lastest ckvolias firmware?

Yes, it's running 20130703.

I have the same problem , change the crome job changed the versions with no real  result
It happened regardless of cip frequency , with higher settings it will happen faster (maybe because of lower timing)
I think is the controller board V1.2 , I`ve ordered a spare one v1.5 from  strombom  to check if it is really the problem
Next week I`ll post the results.
I can confirm that the cgminer is workink ,the process is running , if you stop/start it manualy 75% of tries it will not hash  ,
It starts with the unit making the MHS5s job =0 and the pool alerts you no has is going on , MHSav has status present and the fan is working also , everything looks ok  except the 0 status.
After the cgminer restarts the status is 0 an all the tabs and all the submitted work goes to hw error tab  , tab version and frequency are present with correct values.
Soft reboot with v 703 fixes it 95% of times
with version lower then 703 only hard reboot will fix it .
Hard reboot fixe it 100%
I`m running now with --quiet --avalon-cutoff 65 --avalon-fan 90    frequency 330
added 3 more fan 120x120x38 138m3/h at 100%  temp in 14-16  temp sensor 2 frem 29-33  max 35
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 05:19:13 AM
Remove all the --avalon options, set a Chip Frequency(for example 282) and try again. I also have a silver Avalon that doesn't like the new --avalon options. No idea why, I don't have much time to investigate so I have it hashing at 282Mhz.
a few hours later it happened again
warm reboot does not solve the problem
all 0,00
only a switch off, wait 20 sec and switch on again helped...
hero member
Activity: 826
Merit: 1001
July 11, 2013, 05:12:01 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares
cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?
TIA
Remove all the --avalon options, set a Chip Frequency(for example 282) and try again. I also have a silver Avalon that doesn't like the new --avalon options. No idea why, I don't have much time to investigate so I have it hashing at 282Mhz.

Have you flashed the TP-LINK to the lastest ckvolias firmware?

Yes, it's running 20130703.
member
Activity: 295
Merit: 98
July 11, 2013, 05:00:25 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares
cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?
TIA
Remove all the --avalon options, set a Chip Frequency(for example 282) and try again. I also have a silver Avalon that doesn't like the new --avalon options. No idea why, I don't have much time to investigate so I have it hashing at 282Mhz.

Have you flashed the TP-LINK to the lastest ckvolias firmware?
hero member
Activity: 826
Merit: 1001
July 11, 2013, 04:39:32 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares
cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?
TIA
Remove all the --avalon options, set a Chip Frequency(for example 282) and try again. I also have a silver Avalon that doesn't like the new --avalon options. No idea why, I don't have much time to investigate so I have it hashing at 282Mhz.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
July 11, 2013, 03:54:46 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares

http://imageshack.us/a/img32/9190/gbg9.png

cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?

If you look at the values of the fan speed and the temperature, they are at 0 which indicates there is
a problem with the FPGA module.

If you power it down for 20 seconds and power it up again, you will reset it.

If the problem persists, you could have a hardware problem. If you open it up, is the version 1.52?
Actually all zeroes indicates cgminer never started. There is a problem somewhere in your options.
legendary
Activity: 1112
Merit: 1000
July 11, 2013, 03:48:49 AM
so, after the first test run with this options I saw in the morning that avalon does not provide shares

http://imageshack.us/a/img32/9190/gbg9.png

cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?

If you look at the values of the fan speed and the temperature, they are at 0 which indicates there is
a problem with the FPGA module.

If you power it down for 20 seconds and power it up again, you will reset it.

If the problem persists, you could have a hardware problem. If you open it up, is the version 1.52?
legendary
Activity: 2955
Merit: 1049
July 11, 2013, 02:38:51 AM
now at first time I try
--avalon-auto
without any other options


so, after the first test run with this options I saw in the morning that avalon does not provide shares




cgminer restarted every few minutes, but always 0.00 MHs
only a hard reset does help
anyone have had this before?
TIA
Jump to: