2013-06-26: We have assembled the case and all hole positions are correct! Now we have 15 sets of those cases!
Topic: Avalon Clone Assembly Service Europe - page 6. (Read 20432 times)
Milan77 and adi: I have a few units that are not reserved, I think $2600 for the last full units including assembly is a reasonable price.
2013-06-26: We have assembled the case and all hole positions are correct! Now we have 15 sets of those cases!
2013-06-26: We have assembled the case and all hole positions are correct! Now we have 15 sets of those cases!
Will you be keen to sell complete Avalon clone and for how much?
+1 Any word on pricing?
Will you be keen to sell complete Avalon clone and for how much?
Strombom, you disassembly original hash module. Between the board and the heatsink is the only thermal paste, or they used extra pads ?
2013-06-25: Finally hashing
Next I will solder 10 chips and test with full load... Tomorrow we will receive the enclosures. Lots of things happening now, the biggest job at the moment is logistics Can't wait
2013-06-25: Finally hashing Next I will solder 10 chips and test with full load... Tomorrow we will receive the enclosures. Lots of things happening now
No chips were harmed during this procedure, not very smart of me to remove chip 1 instead of chip 10 eh?
Next I will solder 10 chips and test with full load... Tomorrow we will receive the enclosures. Lots of things happening now 
No chips were harmed during this procedure, not very smart of me to remove chip 1 instead of chip 10 eh?
Strombom, I am interested in one of these. I sent you a PM.
And by the way, nice work! It looks like they are coming together nicely.
And by the way, nice work! It looks like they are coming together nicely.
GandalfG: OK
The aluminium sheet is 3 mm.
The aluminium sheet is 3 mm.
Leave it (pads for connector) clean if no problem for you.
Which is the aluminium sheet thickness of the cut parts for the case?
Which is the aluminium sheet thickness of the cut parts for the case?
GandalfG: You can have your hash boards without the connector mounted. Would you want to have reflowed paste on the connector pads or do you plan to solder them with soldering iron?
20130624: At last the nuts are finished:
20130624: At last the nuts are finished:
GandalfG and rgzen:
Here is the datasheet for the connector (click for higher resolution):
Processing temperature:
240 centigrade, 30-60 seconds
250 centigrade, 5 seconds
Thx for info.Here is the datasheet for the connector (click for higher resolution):
Processing temperature:
240 centigrade, 30-60 seconds
250 centigrade, 5 seconds
For pb free we are very close melt point. Maybe desolder connector before reflow board with new chip ?
GandalfG and rgzen:
Here is the datasheet for the connector (click for higher resolution):
Processing temperature:
240 centigrade, 30-60 seconds
250 centigrade, 5 seconds
Here is the datasheet for the connector (click for higher resolution):
Processing temperature:
240 centigrade, 30-60 seconds
250 centigrade, 5 seconds
Since the information about overclocking the Avalons seems to be out already and it's only a question about time when someone distributes a modified bit-file, I will post mine:
https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
Thanks for this too, I am mining right now at 87 GH/s stable at 380 Mhz with a 3 module unit.https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
so you can just put it on 380 Mhz without any issues? have you tried 395? I didn't dare to put it above 350
) 
Wow is great to know from 282mh/s to 350mh/s or more a 68mh/s increase per chip. 100 chip will give an additional 6.8gh/s
Since the information about overclocking the Avalons seems to be out already and it's only a question about time when someone distributes a modified bit-file, I will post mine:
https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
Thanks for this too, I am mining right now at 87 GH/s stable at 380 Mhz with a 3 module unit.https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
so you can just put it on 380 Mhz without any issues? have you tried 395? I didn't dare to put it above 350
Since the information about overclocking the Avalons seems to be out already and it's only a question about time when someone distributes a modified bit-file, I will post mine:
https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
Thanks for this too, I am mining right now at 87 GH/s stable at 380 Mhz with a 3 module unit. https://dl.dropboxusercontent.com/u/16881231/avalon_clone/firmware/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory_20130519b.bin
I have been running it for a month on a batch 1 unit. Happy mining
As GandalfG I am too interested in get stencils for the hash unit and know max temp for connectors.
Thanks
Thanks
GandalfG: Yes. I can add it to your test board.
May I ask for sample chip for You from SebastianJu ? https://bitcointalksearch.org/topic/m.2531978
I have ordered more than 200 pieces from him.
I have ordered more than 200 pieces from him.
GandalfG: Let me come back to you with info on max temperature. I can provide stencils no problem.
Jump to: