[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 105.

supersonic

full member

Activity: 195

Merit: 104

Quote from: patrike on March 02, 2020, 08:34:27 AM

Awesome Miner version 7.3.7

ASIC mining
- Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
Mining software
- CpuMiner-Opt 3.12.5
- WildRig Miner 0.20.4
- SrbMiner Multi 0.3.7
- NbMiner 27.4
Corrections
- Correction to XmRig GPU device order reporting
- Make Pool Configuration available via the local web interface even when running in mobile mode

Not showing temps in antminers?

narousberg

legendary

Activity: 1754

Merit: 1007

problem with "No go of AM in ver. 7.3.6" is solved in ver. 7.3.7

Great support Patrike! No data lost! You save my day!

Regards

narousberg

legendary

Activity: 1754

Merit: 1007

@patrike
yes, problem with "Unable to load NVRTC. Please check your Nvidia drivers" only on PhoenixMiner
I use Hive, maybe some libs is not installed, but i cant find this libs. I tryed older versions of Phoenix, same lib problem. Maybe this is problem of Hive platform.

Another problem just found:
If i use on Linux rig "Clocking Profile Group" where GPUs will be addressed over GPU ID then this clocking will not be applied to cards. Check pls.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.3.7

ASIC mining
- Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
Mining software
- CpuMiner-Opt 3.12.5
- WildRig Miner 0.20.4
- SrbMiner Multi 0.3.7
- NbMiner 27.4
Corrections
- Correction to XmRig GPU device order reporting
- Make Pool Configuration available via the local web interface even when running in mobile mode

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Globalboosty on March 02, 2020, 03:11:10 AM

Quote from: patrike on February 23, 2020, 06:01:36 PM

Quote from: Globalboosty on February 21, 2020, 10:34:50 AM

Hi all! Do you know how to fix the problem when main window of awesome miner software displayed above other subwindows with menus or dialogues? Sometimes I can see a piece of window and move it to another place outside the main window, but sometimes I even can not see other windows under the main window and can not control them at all.

Can you please give an example of what kind of window that are displayed incorrectly? Is it a specific Awesome Miner window like the Benchmark that shows behind the main window? Or external applications?

Hello, Patrike. This is about main window.

I've had one other user reporting this as well and I'm trying to figure out the exact scenario.

What if you exit Awesome Miner once and start it again, or minimize the application and then restore the window, do you still get the same problem?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on March 01, 2020, 09:32:16 PM

Patrike! I have a problem, in one moment i cant more start Awesome Miner main program on my Win10 computer!!!

this is piece of AM log with error.

PM sent

Thanks for the log file. I've identified the error and will make a new release within the next few hours to correct it.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on March 01, 2020, 08:48:46 PM

I want use PhoenixMiner 4.9c on Linux (Hive) but get error:

I use driver: 440.59 (latest stable)
How to solve?

Hi,

I verified with the same driver version and PhoenixMiner runs fine here. Is it only Phoenix Miner that are unable to do mining on your system, or other mining software as well?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Marvell2 on March 01, 2020, 06:45:08 PM

why does this tool ignore the -di claymore commands to disable certian GPUs ? It accepts the rxboost, strap but when I put -di 012 it still loads all six gpus

From what I can see, parameters like "-di 2" is passed correctly to Claymore miner. Can you please use the Diagnostics button in the toolbar to verify the exact command line Awesome Miner uses to launch Claymore Ethereum Miner?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on February 28, 2020, 03:01:26 PM

hi boss
in mobile version of AM interface i cant see "pool management" on the left menu side. Sometimes if i spin my iphone i can see this menu option, but this is definitely not ok. And if you can, please add opportunity to change overclocking over mobile interface.

Regards

Thanks for the feedback. The "Pool Management" feature was hidden when running on a smaller screen size. In landscape mode it shows up. I will change this to make it always visible.

Globalboosty

newbie

Activity: 21

Merit: 0

Quote from: patrike on February 23, 2020, 06:01:36 PM

Quote from: Globalboosty on February 21, 2020, 10:34:50 AM

Hi all! Do you know how to fix the problem when main window of awesome miner software displayed above other subwindows with menus or dialogues? Sometimes I can see a piece of window and move it to another place outside the main window, but sometimes I even can not see other windows under the main window and can not control them at all.

Can you please give an example of what kind of window that are displayed incorrectly? Is it a specific Awesome Miner window like the Benchmark that shows behind the main window? Or external applications?

Hello, Patrike. This is about main window.

JayDDee

full member

Activity: 1436

Merit: 232

Problems with a specific miner are probably better asked to the developper of the miner,
especially if you're paying a dev fee. You could also run the miner seperately to see if
it's an awesome issue.

narousberg

legendary

Activity: 1754

Merit: 1007

Patrike! I have a problem, in one moment i cant more start Awesome Miner main program on my Win10 computer!!!

this is piece of AM log with error.

PM sent

narousberg

legendary

Activity: 1754

Merit: 1007

I want use PhoenixMiner 4.9c on Linux (Hive) but get error:

Code:

Initialize diagnostics (40)
Starting Diagnostics (120s). Awesome Miner Remote Agent version: 7.3.6
OS: Unix 5.0.21.0
nVidia driver version: 440.59
Microsoft VC++ 2013 runtime installed: No
Microsoft VC++ 2015 runtime installed: No
Starting Mining Software
Setting up Miner Engine. Instance: 2
Engine Type: PhoenixMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: 
Set clocking start profile: 278, P95_C140_M1100_F0_linux (when stopping, the following will be used: 3, type: Single, Use: True)
Properties: (WindowMode: ConsoleFormat, EngineType: PhoenixMiner, IsProfitMiner: False)
====================================================================================================
/root/.config/AwesomeMinerService/phoenixminer_4.9c_linux.tar_2/PhoenixMiner_4.9c_Linux/PhoenixMiner  -wdog 1 -rmode 0 -cdm 2 -cdmport 4029
Configuration: 
POOL: stratum+tcp://progpow.mine.zergpool.com:3200, WAL: 16bq14HbuuwJD1dHizP2hRknMT2cwgj3pt.TEST, PASS: c=BTC, PROTO: 1, COIN: bci, ALLPOOLS: 1

==========

====================================================================================================
Mining Engine Process started, PID: 12907
Phoenix Miner 4.9c Linux/gcc - Release build
--------------------------------------------

[0mCUDA version: 10.0, CUDA runtime: 8.0
OpenCL driver version: 19.20
OpenCL driver version: 19.20
[97mAvailable GPUs for mining:
[92mGPU1: GeForce RTX 2080 Ti (pcie 1), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU2: GeForce RTX 2080 Ti (pcie 2), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU3: GeForce RTX 2080 Ti (pcie 3), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU4: GeForce RTX 2080 Ti (pcie 4), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU5: GeForce RTX 2080 Ti (pcie 5), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU6: GeForce RTX 2080 Ti (pcie 8), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU7: GeForce RTX 2080 Ti (pcie 9), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
GPU8: GeForce RTX 2080 Ti (pcie 10), CUDA cap. 7.5, 11 GB VRAM, 68 CUs
[0mNvidia driver version: 440.59
[97mEth: Loading pools from epools.txt
[96mPP: the pool list contains 1 pool (0 from command-line)
PP: primary pool: progpow.mine.zergpool.com:3200
[0mStarting GPU mining
[96mPP: Connecting to progpow pool progpow.mine.zergpool.com:3200 (proto: Stratum)
[95mGPU1: 44C 43% 23W, GPU2: 47C 46% 11W, GPU3: 45C 44% 14W, GPU4: 44C 42% 9W, GPU5: 43C 42% 21W, GPU6: 42C 41% 22W, GPU7: 44C 43% 4W, GPU8: 43C 42% 5W
GPUs power: 107.8 W
[92mPP: Connected to progpow pool progpow.mine.zergpool.com:3200 (103.249.70.7)
[96mPP: Subscribed to progpow pool
[97mListening for CDM remote manager at port 4029 in full mode
[92mPP: Worker 16bq14HbuuwJD1dHizP2hRknMT2cwgj3pt.TEST authorized
[0mPP: New job #facea5eb from progpow.mine.zergpool.com:3200; diff: 188MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #29
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
GPU7: Starting up... (0)
GPU8: Starting up... (0)
Light cache generated in 0.6 s (31.3 MB/s)
[91mUnable to load NVRTC. Please check your Nvidia drivers
[0mGPU1: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU1 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU2: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU2 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU3: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU3 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU4: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU4 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU5: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU5 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU6: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU6 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU7: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU7 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
[0mGPU8: Allocating DAG (1.24) GB; good for epoch up to #31
[91mCUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU8 initMiner error: invalid device context
Thread(s) not responding. Restarting.



[0m

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

I use driver: 440.59 (latest stable)
How to solve?

Marvell2

full member

Activity: 1148

Merit: 132

why does this tool ignore the -di claymore commands to disable certian GPUs ? It accepts the rxboost, strap but when I put -di 012 it still loads all six gpus

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: narousberg on February 29, 2020, 04:58:56 AM

Quote from: The Cryptophilanthropist on February 28, 2020, 03:21:37 PM

Recently switch my AM to Linux interface , it's great!
How can I get OhGodAnETHlargementPill to run at launch with my template, I can manually run it of course and it works fine, but can't figure out how to launch it along with all the rigs templates.
Any help please? Thanks

Install OhGodAnETHlargementPill
"Profit Profile" -> "Batch Commands" -> "Execute Additional Command"s -> "Before starting mining software" -> put there command string like:
sudo /pathToMyPill/OhGodAnETHlargementPill
this will work global for all algos if miner with this Profile will start, but you can run Pill only for specifed algo, than you must specify starting/stoping scripts for each algo you need (select algo in Profile and see down checkbox "Batch commands:" )

Enjoy

Thanks, however I have done it that way, just not using sudo because my system is root. I will try it though.

###UPDATE## That did it!! Thanks , truly awesome!

narousberg

legendary

Activity: 1754

Merit: 1007

Quote from: The Cryptophilanthropist on February 28, 2020, 03:21:37 PM

Recently switch my AM to Linux interface , it's great!
How can I get OhGodAnETHlargementPill to run at launch with my template, I can manually run it of course and it works fine, but can't figure out how to launch it along with all the rigs templates.
Any help please? Thanks

Install OhGodAnETHlargementPill
"Profit Profile" -> "Batch Commands" -> "Execute Additional Command"s -> "Before starting mining software" -> put there command string like:
sudo /pathToMyPill/OhGodAnETHlargementPill
this will work global for all algos if miner with this Profile will start, but you can run Pill only for specifed algo, than you must specify starting/stoping scripts for each algo you need (select algo in Profile and see down checkbox "Batch commands:" )

Enjoy

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Recently switch my AM to Linux interface , it's great!
How can I get OhGodAnETHlargementPill to run at launch with my template, I can manually run it of course and it works fine, but can't figure out how to launch it along with all the rigs templates.
Any help please? Thanks

narousberg

legendary

Activity: 1754

Merit: 1007

hi boss
in mobile version of AM interface i cant see "pool management" on the left menu side. Sometimes if i spin my iphone i can see this menu option, but this is definitely not ok. And if you can, please add opportunity to change overclocking over mobile interface.

Regards

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.3.6

Awesome Miner Antminer firmware
- Improved firmware installation for Antminer L3+ with better unlock support
ASIC mining
- Added feature to configure Antminer network settings (via the ASIC Tools menu)
Configuration
- Added new setting for the automatic API access configuration, to indicate if a mining process restart should be automatically performed
Mining software
- CpuMiner-Opt 3.12.4.3
- XmRig 5.7
- Gminer 1.98
- WildRig Miner 0.20.2
- SrbMiner Multi 0.3.6

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: sxemini on February 26, 2020, 08:32:53 AM

Ok thanks.

Any plans for more predefined pools with pool balance integration for example ethermine would be nice.

The goal is to add support for the most popular pools, also based on user feedback. So you feedback here is valuable and ethermine can for sure be the next one for us to add. I've noted this.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 105. (Read 703547 times)