Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 100. (Read 703547 times)

Hi Patrike,

we installed the AM-Firmware for the S17+ - everything fine except 1 thing:
we set Target chip temperature to 80 (°C) but the Fan's run almost full speed and don't let the temperature going over 75...

BR Ralf

ok i send you through email

1) Can you please send me the Remote Agent log file via PM or e-mail (toolbar: Tools -> Log File -> Remote Agent)
2) Please also confirm if manual fan speed changes are working or not. This will be of help to understand if it's a problem with setting fan speed in general or if it's only the the global fan speed feature that isn't working.
Thanks!

Can you please check if a reboot resolves this? Please see the post above for details:
https://bitcointalksearch.org/topic/m.54231813

ya it doesnt work... i must using hiveos autofan....

On-Line update does not work
"upgrades" back to 7.5.1

Awesome Miner version 7.5.2

 Awesome Miner Antminer firmware
  - Introducing firmware for Antminer S17+
  - Introducing firmware for Antminer T17+
 ASIC mining
  - Antminer K5 supported with temperature display and device details
 GPU mining
  - Improved support for Ubuntu 20.04 for Remote Agent on Linux
 Mining software
  - SrbMiner Multi 0.4.3
  - CpuMiner-Opt 3.12.8

If there are pending upgrades for Windows Update, Windows may prevent other installation software from running. The solution is to reboot the computer, where Windows Update will perform the required tasks. After the reboot, it will be possible to upgrade Awesome Miner.

In addition to using the upgrade feature inside Awesome Miner, the latest version of the software can also be downloaded and installed from the web site. Installing by downloading via the web site will also result in an upgrade.

I'm not able to upgrade to version 7.5.1...  It downloads, and installs, but keeps reverting back to the previous version.

Can you manually set the fan speed via Awesome Miner (the GPU Clocking dialog)? Is it only the "Enable global fan speed" feature in the Options dialog, GPU settings section, that doesn't work?

When using the Diagnostics button for this case, do you see if Awesome Miner pass both Ethereum and the dual pool to PhoenixMiner? Is there a specific algorithm combination that isn't working?

i have solve this problem, reupload with custom software and its works looks like gminer software not download properly in linux but this is only happen only with 1 rig... btw new problem is i cant setup auto fan on linux with awesome some i must use hiveos autofan setting to make that auto fan work

Anyone mining with PhoenixMiner in dual mode with AwesomeMiner ?
I do not seem to get it to work.. Only Claymore..

Thanks for the suggestions - they are noted!

Thanks for the update. Can you please try to run gminer manually from the command line like @narousberg suggested?
cd /root/.config/AwesomeMinerService/gminer_2_06_linux64.tar_2/
./miner

Does this give additional details about the problem?

This should already be available. Nicehash Ethereum and Nicehash HNS pools are available. NbMiner is an example of mining software that can dual mine these.

If you manually setup your Managed Miner, you will have to create a Pool Group (Options dialog, Pools section) where you include Nicehash Ethereum and HNS. In the properties of your Managed Miner you select NbMiner as software, select Dual Mining for Ethereum + Handshake and finally select the Pool Group you just created.

Feature request:
1. Add "/api/managedtemplates/{id} - to get a specific template
2. Expose more data in "/api/managedtemplates" - add algorithm, pool details so as to decide if a template is good or needs some changes.

@ayiphelmy looks like not all necessary libraries are installed or path to libs not configured.  Try to start miner over ssh console, maybe you will see some linux OS error message

if you use HiveOS as linux mining platform, Hive install following libs on system in /hive/lib:

libcudart.so.9.1          libnvrtc-builtins.so.10.0      libnvrtc.so.10.1.105
libcudart.so.10.0      libcudart.so.9.1.85       libnvrtc-builtins.so.10.0.130  libnvrtc.so.9.0
libcudart.so.10.0.130  libcudart.so.9.2          libnvrtc-builtins.so.10.1      libnvrtc.so.9.0.176
libcudart.so.10.1      libcudart.so.9.2.148      libnvrtc-builtins.so.10.1.105  libnvrtc.so.9.1
libcudart.so.10.1.105  libhwloc.so.5             libnvrtc-builtins.so.9.2       libnvrtc.so.9.1.xxx
libcudart.so.8.0       libhwloc.so.5.6.8         libnvrtc-builtins.so.9.2.148   libnvrtc.so.9.2
libcudart.so.8.0.61    libmicrohttpd.so.10       libnvrtc.so.10.0               libnvrtc.so.9.2.148
libcudart.so.9.0       libmicrohttpd.so.10.34.0  libnvrtc.so.10.0.130        
libcudart.so.9.0.176   libnvrtc-builtins.so      libnvrtc.so.10.1

sometimes to properly configure linux for mining you must configure libs paths with command:
sudo ldconfig /hive/lib  (change path to where you put libraries, depend on your installation)

@patrike I think this is a good idea to put necessary libs in AwesomeMiner Linux agent installation package

Regards

Finally i can figure to work in linux but have problem in some rig wont start gminer it say in diagnostic :

Initialize diagnostics (20)
Starting Diagnostics (30s). Awesome Miner Remote Agent version: 7.5.1
OS: Unix 5.0.21.0
nVidia driver version: 440.31
Microsoft VC++ 2013 runtime installed: No
Microsoft VC++ 2015 runtime installed: No
Starting Mining Software
Setting up Miner Engine. Instance: 2
Engine Type: GMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Set clocking start profile: 186, RIG8BEAM (when stopping, the following will be used: -1, type: Single, Use: False)
Properties: (WindowMode: ConsoleFormat, EngineType: GMiner, IsProfitMiner: True)
====================================================================================================
/root/.config/AwesomeMinerService/gminer_2_06_linux64.tar_2/miner   --pers GrimmPOW --ssl 1 -a 150_5 -s grimm-us.ravepool.com -n 3334 -u 141073a3ab09f3a51414f4fb7842bf7b4dd62e15dd8739fdcdb8969112e45071a9c.RIG8 -p notify [email protected] -w 0 --api 4029
Configured command line:
 --pers GrimmPOW --ssl 1
====================================================================================================
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed

Can you implement NiceHash ETH+HNS dual mining, please?