Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 127. (Read 703547 times)

HI, I am mining Zclassic (Equihash Zero algorithm) with 195 h/s. Whattomine shows the profitability as $2.85 per day, but in Awesome Miner dashboard it's &700 per day! I have added the json link of Zclassic to Awesome Miner settings but the profitability is still inaccurate. What's the solution?

All is well now. I couldnt tell ya what the issue was but the software is retrieving whats needed and working again.

Latest definitions update killed all of my mining. Is the server these softwares update from offline?

All entries are showing as "starting" and stays that way now after it installed.

@trucobit Thanks for advice, i am seldom use Mining Dutch and mostly mine on NiceHash (when i sleep) or coins directly. But i want know and configure my AM to 100%
AM is best instrument, where i have all needed information on one place, but what to mine i always decide self, after i investigate market for coin. AM give me only advice and direction what must i check.
I am steady on filling my AM with coin/pool/exchange data. Overclocking and profit profiles. This is big job...
You are right with Ferrari with 80 KM/h )))

You are sure that protocols are added, but I would like them to be added by themselves and the coins that are in our suppliers would appear alone when measuring the protocol.

But not only do you need to add the protocol or "al-go", you also need to add some more, more serious and paid statistics provider.

WTM few coins, everyone uses it, all coins are saturated

Coinwarz same as WTM

Coinscalculator and Cointomine, especially the latter, use data of very poor quality, just update, make mistakes in rewards and give a rare stockings. That is why whenever I am going to undermine something, I always create the currency or I change the data to dynamic and I add the blocktime, reward, Dynamic difficulty extracted from the Explorer or from a pool and nethash, use full formula and then a few hours mining with screenshots to see what it says that I will win and what I really earn in the pool and at that moment I can know exactly the profit value of that currency. But all this does not happen with coinscalculator and Cointomine that practically cointomine is abandoned.

We need more coin providers, I use them for reference, I never use the data for these services. For that, PAtrike added some time ago at my request to be able to fully personalize the currency and use the complete formula and not the exponential one.

@Patrike needs more suppliers, including scraper minerstast or wherever. but more coins are needed, better data quality and more protocols or "al-gos" will be good for everyone, and it would make my job a bit easier.

As I said before, I am mining a coin that does not appear in AM with all the rigs and I have added it, both the protocol and the currency data.

If you allow me some advice, do not use self-exchanges, you will earn less than if you use coins, several well-measured coins.

It is very easy to go to online services and look at the "al-gos" and the hash of NLpool and compare it with others. You also do not earn what is said. By using Auto exchanges you are losing 20% ​​of profits instead of having 4 or 5 coins in auto profit and supporting the Nicehash auto exchange.

The data I have told you is important, look at the protocol and see how much hash it has in Nlpool and compare it with other pools. In the end each auto exchange has more power in some or some others, it is a mess. Also, they almost never give up what they say.

To have AM and only use auto exchange, is to have a Ferrari to go at 80km per hour. For that you have other programs even free, less, or hashauger for example. The latter with a good graphic interface but lacks all the advanced AM functions.

I did not enter mining to use autoexchanges only, if the earnings have already gone down, the less you earn using auto exchanges.

one other small bug what i found:
Pofit miner running, at this moment i change GPU Overclocking Profile in Miner Profit Profile, some time later,  if miner crashed, new settings  will not be read from Profit Profile. New settings will be read only if user explicit stop&start miner. Look into this pls.

Hi boss, one suggestion:
pls add some button/selectBox to OnlineService tab, where user can quick switch between Statistics method calculation (24 actual, estimated, current, etc) with and without affecting the miners. You have place for this on the window bottom. Maybe its a good idea to show additional columns with another calculation method, to made comparation easy.Regards

You are very nice with your jokes. If I use "Al-go" and I don't separate it with a script, in Spanish it has a meaning and the translator changes it to "something", so that other people like you understand it and the translator makes a mess, I put a script and not even translate it.

You yourself knew what I meant, but instead of talking about serious things, you like to make jokes, not knowing why I write it that way. You will surely be very unproductive in your life if you look at those stupidities.

My language is Spanish, and that word has another meaning, I have to prevent it from being translated using the script.

I hope I have clarified your doubts and you can continue laughing, when we are in a serious forum.

In these exotic algorithms I have discovered a currency that is well above the currencies that AM brings us by default with its data providers. I have added the data by hand and using the complete formula, I am mining it with hardly any competition and I sell it at a good price, I just undermine that coin and discovered it through minerstats. I do not know how it will be as a miner minerstats, but if I have registered and use its functions, it is all based on online web.

There are people who take these very seriously and look for rare coins, with exchange and little competition, and precisely minerstats have given me that, I consult it very often. There are many ways to work, not because you don't use a way, this is going to be worse than your way of working.

If you settle for what you have, well, I always look for the most profitable, and I dedicate a lot of time precisely to that task, so that my profit is the best. That currency which I reserve, is more profitable than any of those that appear in AM (of those that work well and have good data). I do not undermine anything that has not added dynamic data, such as difficulty, nethash, etc. And I use the complete formula, and then measure the profit of the pool to obtain the real benefit. Do you do all that, or do you settle for the data crap that Cointomine gives ?, or with the coins that everyone mines from WTM etc.

Thanks - I agree and there have also been similar suggestions in the past so it's noted and the plan is to support it in the future.

Thanks for the suggestion, I will look into this for the next version.

Thanks for the feedback. I can make a small UI adjustment in the next release, but there are many settings in the Profit Profiles dialog that needs to fit.

I've pushed an update for this - please use the feature to Update Mining Software Definitions.

Mining Dutch wasn't supposed to be selectable for Pool Balance as the implementation isn't ready yet. They do have an API for balance, but it must be requested for each individual coin (can be 50 or them...) so Awesome Miner will put quite high load on their servers to figure all this out.

I've reached out to them about this now and see if there are any good solutions. The plan is to have support for balance via Mining Dutch later on.

Once the implementation is ready, the idea is that you enter your Mining Dutch API-key (can be found in the account settings on the Mining Dutch web site) in Awesome Miner.

Can you please share the exact error message for this?
Do you run any security software or anti-virus that can be disabled for testing purpose to see if that is blocking the update?

If you have save the overclocking settings to a GPU Clocking Profile, you can configure this clocking profile to be automatically applied when a miner is started. If you always want the same overclocking you can right click on the miner, go to the GPU Clocking Profiles section and select your profile to be applied when the miner is started.

If you want to use multiple clocking profiles and use a different one depending on the algorithm you use for the profit switcher, please right click on the miner and select Edit Profile Profile where you can set the clocking per algorithm.

Suggestion : Add the PCI ID, GPU ID and name etc to the dead device notification. On a multi gpu rig, saying which GPU is dead will help in debuggin a lot.

hey patrike
Zergpool provides some additional API fields for better earnings tracking. please consider using "workers_shared" instead of "workers", and "actual_last24h_shared" instead of "actual_last24h". should make actual payout stats more accurate.

thank you

hi boss
can you made longer selectBoxes elements for start&stop GPU Clocking Profile in Profit Profile Properties dialog. Names of GPU clocking profiles need more place.
Thx

Hi Patrike,

Can you add this in the next update, thanks.

https://github.com/z-enemy/z-enemy/releases/download/ver-2.3/z-enemy-2.3-win-cuda10.1.zip