[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 130.

crazydane

full member

Activity: 558

Merit: 194

Hi Patrik,

On the new feature to show Exchange balances, I'm having an issue with a couple of holdings I have on Bittrex. They both show N/A for the dollar value.

One coin is RVN and I think the reason is that AM still think this coin is tied to X16r. That changed to X16rv2 after the fork. Don't see a place in AM where I can change it. I was able to change down along the bottom of the AM window where I can keep tabs of 15 different coins.

The other coin is BURST which I know is pretty obscure, but is carried by CoinGecko, so perhaps adding them as a Statistics Provider would take care of it?

EDIT: I was able to fix the BURST coin issue by adding it as a custom coin and pulling the value from CoinGecko.

Thanks

narousberg

legendary

Activity: 1754

Merit: 1007

Quote from: patrike on October 24, 2019, 08:56:14 AM

Quote from: narousberg on October 23, 2019, 07:37:27 AM

Hi boss
can you improve benchmark functionality and add a view of actual middle value for actual tested algo.
this is very helpful if user benchmark random algos like x16rv2, x21s, etc
If i want benchmark those algos, i need to run benchmark for 24 hours if i want precise value, but if i see that the counter no more grow, i can stop benchmark and write value in profile.

Regards

Good point. Basically to show preliminary hashrate values during the benchmark, right?

Yes, good to know calculated hashrate middle value during the test phase. Good Benchmark is very important for mining. Maybe you can add possibility to change overclocking during test.

STSMiner

full member

Activity: 270

Merit: 115

Quote from: patrike on October 25, 2019, 08:26:39 AM

Awesome Miner version 7.0.9 (Development preview of 7.1)

Features
  - Exchange balance feature to list your account balance for exchanges like Coinbase, Bittrex and Poloniex. Configurable in the Options dialog, Balance section. Displayed in the Balance tab in the main window.
User interface
  - The balance tab in the main window uses sub tabs for Pool balance, Wallet balance and the new Exchange balance feature
Mining software
  - CpuMiner-Opt 3.9.9.1
  - Miniz Miner 1.5r

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Patrike,

Wallet balance for BTC from the blockchain for Bech32 addresses does not work.

Works fine on Pool balance tab.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.0.9 (Development preview of 7.1)

Features
- Exchange balance feature to list your account balance for exchanges like Coinbase, Bittrex and Poloniex. Configurable in the Options dialog, Balance section. Displayed in the Balance tab in the main window.
User interface
- The balance tab in the main window uses sub tabs for Pool balance, Wallet balance and the new Exchange balance feature
Mining software
- CpuMiner-Opt 3.9.9.1
- Miniz Miner 1.5r

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on October 23, 2019, 07:37:27 AM

Hi boss
can you improve benchmark functionality and add a view of actual middle value for actual tested algo.
this is very helpful if user benchmark random algos like x16rv2, x21s, etc
If i want benchmark those algos, i need to run benchmark for 24 hours if i want precise value, but if i see that the counter no more grow, i can stop benchmark and write value in profile.

Regards

Good point. Basically to show preliminary hashrate values during the benchmark, right?

narousberg

legendary

Activity: 1754

Merit: 1007

Hi boss
can you improve benchmark functionality and add a view of actual middle value for actual tested algo.
this is very helpful if user benchmark random algos like x16rv2, x21s, etc
If i want benchmark those algos, i need to run benchmark for 24 hours if i want precise value, but if i see that the counter no more grow, i can stop benchmark and write value in profile.

Regards

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ayiphelmy on October 22, 2019, 10:36:55 AM

Quote from: patrike on October 22, 2019, 09:29:07 AM

Awesome Miner version 7.0.8 (Development preview of 7.1)

ASIC mining
  - Antminer Z11 firmware from June 28th supported
Integration
  - Mining Pool Hub pool list updated
Mining software
  - SrbMiner Multi 0.1.4
  - XmRig CPU miner 4.4.0 beta
Corrections
  - Correction to profit switching for dual mining if the profit for Ethereum is negative and no dual mining pools are available
  - Correction to benchmark of NbMiner

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Nice! looks like i must download manualy again because auto update on aweso had problem again... whats going on on auto update on awesome?

There are two common reasons why the automatic updates can fail:
1) If there are pending upgrades for Windows Update, Windows may prevent other installation software from running. The solution is to reboot the computer, where Windows Update will perform the required tasks.
2) Some anti-virus software may block the update. You can also verify if "IntelliBreeze Maintenance Service" is running correctly as a Windows Service (run "services.msc" via the Windows start menu to open the Windows Service dialog). If it isn't running correctly, it might have been blocked by anti-virus software.

SickTricky

newbie

Activity: 35

Merit: 0

Quote from: sxemini on October 23, 2019, 04:15:08 AM

Quote from: SickTricky on October 23, 2019, 04:02:37 AM

Hey. anyone having issues with the miner "stopped" with maybe a dead pool

or something
have to manually start it each time, I dont know how many failed attempts
tried some rules but cant get it to work.

Take another pool, when its down so offen. Roll Eyes

why someone mining in a pool with bad connection?

Awesomeminer tries 3 times to start the miner by default, you can change in Option -> Mining Settings

Thanks
its MPH and Nicehash on fiber
so its maybe the pools

will set more retries

sxemini

member

Activity: 1558

Merit: 69

Quote from: SickTricky on October 23, 2019, 04:02:37 AM

Hey. anyone having issues with the miner "stopped" with maybe a dead pool

or something
have to manually start it each time, I dont know how many failed attempts
tried some rules but cant get it to work.

Take another pool, when its down so offen. Roll Eyes

why someone mining in a pool with bad connection?

Awesomeminer tries 3 times to start the miner by default, you can change in Option -> Mining Settings

SickTricky

newbie

Activity: 35

Merit: 0

Hey. anyone having issues with the miner "stopped" with maybe a dead pool

or something
have to manually start it each time, I dont know how many failed attempts
tried some rules but cant get it to work.

crairezx20

legendary

Activity: 1638

Merit: 1046

Quote from: ayiphelmy on October 22, 2019, 10:36:55 AM

Nice! looks like i must download manualy again because auto update on aweso had problem again... whats going on on auto update on awesome?

I don't set auto-update the awesomeminer I just manually update it because if I set it to auto the awesomeminer and my rig stuck you can't either ctrl+alt+del you will force to reboot the rig to make it work again.

Are you having the same thing when you set it to auto-update? Why not just manually update it to keep your rig safe and to avoid auto-update to download unknown sources just my suggestion.

ayiphelmy

copper member

Activity: 416

Merit: 105

Quote from: patrike on October 22, 2019, 09:29:07 AM

Awesome Miner version 7.0.8 (Development preview of 7.1)

ASIC mining
- Antminer Z11 firmware from June 28th supported
Integration
- Mining Pool Hub pool list updated
Mining software
- SrbMiner Multi 0.1.4
- XmRig CPU miner 4.4.0 beta
Corrections
- Correction to profit switching for dual mining if the profit for Ethereum is negative and no dual mining pools are available
- Correction to benchmark of NbMiner

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Nice! looks like i must download manualy again because auto update on aweso had problem again... whats going on on auto update on awesome?

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.0.8 (Development preview of 7.1)

ASIC mining
- Antminer Z11 firmware from June 28th supported
Integration
- Mining Pool Hub pool list updated
Mining software
- SrbMiner Multi 0.1.4
- XmRig CPU miner 4.4.0 beta
Corrections
- Correction to profit switching for dual mining if the profit for Ethereum is negative and no dual mining pools are available
- Correction to benchmark of NbMiner

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

sxemini

member

Activity: 1558

Merit: 69

Quote from: patrike on October 22, 2019, 04:31:37 AM

Quote from: sxemini on October 22, 2019, 03:24:10 AM

Hi Patrike,

Custom Access Toolbar:

Show miner online = green button
Show miner offline = the same green button

Can you change this? Or can i add my own icons?

The Quick Access Toolbar is not really an official feature in Awesome Miner as those buttons are not saved when you restart Awesome Miner. The green icon is actually a default icon when adding a toolbar button without any icon. This is the reason why it's always green. It's not possible to customize these icons as it only a feature provided by the UI framework but not in active use by Awesome Miner today.

Ok thanks.

it is a nice feature, i hope you will add this in the future.

ayiphelmy

copper member

Activity: 416

Merit: 105

Quote from: patrike on October 22, 2019, 04:22:30 AM

Quote from: ayiphelmy on October 21, 2019, 07:11:56 PM

Hai i have problem updating version 7.0.7 it always say failed to download update try to download from website... but i see in the awesome website is still 7.0.6 version... so where i can download manualy for updating my awesome???

Version 7.0.6 is the latest public release while 7.0.7 is a development release and not listed on the web site.

Please use these direct download links below for the most recent development version (currently 7.0.7):
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Thanks a lot patrick now my awesome is update with thats link u send GOOD JOB BRO!!!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ralf007at on October 22, 2019, 04:33:41 AM

Hi Patrik,

we have many z11 running - with the newest Firmware (from June 28th) the miner is reporting a 1000 times profit in AM - in the miner status display (WEB) everything seems right?!

BR Ralf

Hi Ralf,

It's true that the hashrate unit reported by Antminer Z11 has changed depending on firmware version. The Antminer reports a hashrate value without unit so Awesome Miner needs to look at the firmware date to understand if it's kH/s or something else. Right now Awesome Miner will look at if the firmware version is the latest, which is actually August 26th, and adjust the hashrate for this version.

It sounds like the slightly older firmware version from June 28th also would need the same adjustments.

Could you please send me the API report from one of these miners (via PM or mail)? With this information I can make the adjustments and verify the result. Thanks!

ralf007at

newbie

Activity: 52

Merit: 0

Hi Patrik,

we have many z11 running - with the newest Firmware (from June 28th) the miner is reporting a 1000 times profit in AM - in the miner status display (WEB) everything seems right?!

BR Ralf

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: sxemini on October 22, 2019, 03:24:10 AM

Hi Patrike,

Custom Access Toolbar:

Show miner online = green button
Show miner offline = the same green button

Can you change this? Or can i add my own icons?

The Quick Access Toolbar is not really an official feature in Awesome Miner as those buttons are not saved when you restart Awesome Miner. The green icon is actually a default icon when adding a toolbar button without any icon. This is the reason why it's always green. It's not possible to customize these icons as it only a feature provided by the UI framework but not in active use by Awesome Miner today.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ayiphelmy on October 21, 2019, 07:11:56 PM

Hai i have problem updating version 7.0.7 it always say failed to download update try to download from website... but i see in the awesome website is still 7.0.6 version... so where i can download manualy for updating my awesome???

Version 7.0.6 is the latest public release while 7.0.7 is a development release and not listed on the web site.

Please use these direct download links below for the most recent development version (currently 7.0.7):
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: razerf on October 21, 2019, 04:04:31 PM

Quote from: patrike on October 21, 2019, 01:42:30 PM

Quote from: razerf on October 21, 2019, 02:37:59 AM

Quote from: patrike on October 20, 2019, 03:09:04 PM

Quote from: razerf on October 20, 2019, 02:22:34 PM

Quote from: patrike on October 20, 2019, 12:13:08 PM

Quote from: MATHReX on October 20, 2019, 06:38:18 AM

Quote from: razerf on October 20, 2019, 06:15:03 AM

i don't have this option in profit miner

Apologizes, I can see that Claymore miner has this option but Phoenix Miner does not.
Anyway, Phoenix Miner supports only "Blake2s" as dual mining.

You can untick Blake2s algorithm from Algorithms in options.
That should do the trick.

With the recent development release 7.0.7, the "Dual mode" setting should be visible in the Properties dialog for PhoenixMiner in the same way as it's available for Claymore Ethereum miner.

I have no option with profit miner, which allows me not to take into account the dual mining, via phoenix miner, even if I disable blake 2s, if I enter 0h / s and 0w dual on ethereum, I will necessarily work on the ethereum, I had no problem with the previous version, while it is not necessarily the ether the most profitable consumption power

Previously Awesome Miner never used dual mining for Phoenix Miner. Now it will use it in the same way as for Claymore Miner.

If you don't want dual mining, isn't your Profit Profile change where you define 0 H/s for Ethereum Dual Mining Hashrate working fine? In previous versions this change was not required for Phoenix Miner as dual mining wasn't supported.

if I enter 0h / s in the dual mining, yes I will not use it, but despite the 0h / s and 0watt dual, is taken into account in the calculation of profitability, so my rig no work more on the most profitable currency.

The Profit Switching tab will list both Ethereum only and the dual mining alternatives like Ethereum + Blake2s and indicate the profitability for each of the alternatives. The alternatives that are not the most profitable will not be used. The list may also contain many other algorithms that are considered.

If you don't want the Ethereum + Blake2s option to be included in the list at all, please uncheck "Blake2s" from the algorithm list in the Profit Profile Properties.

It's already done, that's what I say for several post, although blake2s is unchecked, the dual is still taken into account attached a screenshot

and in this case, even if another currency becomes more interesting, I remain stuck on the ethereum

Thanks for the screenshot. What I noticed is that when no dual algorithm/pool is enabled, Awesome Miner will consider both the main hashrate/power and dual hashrate/power for Ethereum and this can become a problem if the profitability is negative.

As the main hashrate/power is resulting in a negative profit in your case, the dual hashrate/power of 0H/s and 0W is considered more profitable as this profitability is 0. As a workaround you could enter the same dual hashrate/power as you have for the main hashrate/power.

I will also change this in the next release and simply ignore the dual hashrate/power if no dual mining algorithms are selected. This will correct the scenario you reported. Thanks for finding this one.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 130. (Read 703547 times)