Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 142. (Read 703547 times)

Thanks, that fixed it.

@patrike - AM picked up my FutureBit Apollo miner with ease but its reporting the hash wrong - per pool and gui I am hashing right at 105 mh/s in eco mode - AM shows the miner at 2.74 mh/s

my guess is that it is not picking up all the chips?

note: it is identifying it as a FPGA miner not as an ASIC

Hi,
The Awesome Miner installer is based on the Windows Installer concept, where the uninstallation requires Windows to keep track of the installed software. In case Windows is unable to perform an upgrade or uninstallation, please use this tool from Microsoft to force the removal.
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

I need Awesome Miner Remote Agent Installer 6.8.2. When I tried to update the remote agent it would not do it. i then tried manually, but it says it needs the installer to uninstall the installed version (which is 6.8.2) and will not install 6.9 because of it. Can you provide a link to that installer please?

Awesome Miner version 6.9

 Awesome Miner Antminer firmware
  - The firmware can be automatically downloaded by selecting it from the list in the Update firmware dialog (toolbar: Tools -> ASIC Tools -> Update firmware)
  - Firmware for Antminer T9+ added (only for T9+, not for T9)
 ASIC mining
  - Chip temperature for Antminer S15 and S17 will always display the highest temperature reading per board
 GPU mining
  - Bulk edit improved to include configuration of Managed Miner property for Administrator Privileges
 Features
  - A new Information column can be added to the list of miners where a number of predefined properties can be included and displayed. Including details from the Awesome Miner Antminer firmware, uptime, pool worker name and more.
  - Create mining pool via context menu for a specific coin on the Coins tab
 User interface
  - NOTE: The built-in web interface will be set to use the new user interface design by default. The Classic user interface can still be enabled via the Options dialog, Web section - but will be discontinued in the future.
  - The coin selection control has been improved and will also allow sorting on either coin name or algorithm name
 Mining software
  - T-Rex miner 0.13.2
  - CryptoDredge 0.21.0
  - Gminer 1.55
  - XmRig CPU 3.0.0
  - Lolminer 0.8.7
  - Miniz Miner 1.5p
  - BMiner 15.8.1
 Corrections
  - Correction to colors for chip status when using the Awesome Miner Antminer firmware
  - Correction for profit switcher for External Miners when using both the new and old Nicehash platform

Thanks for the update.

Is my understanding correct that the mining software do start and continue to run, but it's never hashing and stays at 0MH/s all the time?
1) Do you run into this problem if you change the clocking back to default?
2) Do you get this problem if you underclock?
3) Is it only PhoenixMiner that experience these problems?

Initialize diagnostics (20)
Starting Diagnostics (30s). Awesome Miner Remote Agent version: 6.8.3
OS: Unix 4.15.0.55
Microsoft VC++ 2013 runtime installed: No
Microsoft VC++ 2015 runtime installed: No
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: PhoenixMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Set clocking start profile: 12, 580_3 (when stopping, the following will be used: -1, type: Single, Use: False)
Properties: (WindowMode: ConsoleFormat, EngineType: PhoenixMiner, IsProfitMiner: False)
====================================================================================================
/root/AwesomeMinerService/phoenixminer_4.5c_linux.tar_1/PhoenixMiner_4.5c_Linux/PhoenixMiner  -wdog 1 -rmode 0 -cdm 2 -cdmport 4028
Configuration:
POOL: eu1.ethermine.org:4444, WAL: 0x25c94d6e2e8ac343e9b87e833dbe8a49081d879f.Eth04, PASS: x, PROTO: 2, ALLPOOLS: 1

====================================================================================================
Mining Engine Process started, PID: 5784
Phoenix Miner 4.5c Linux/gcc - Release build
--------------------------------------------

No CUDA driver found
OpenCL driver version: 18.40
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 5), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie , OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 9), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie 10), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU8: Radeon RX 580 Series (pcie 11), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU9: Radeon RX 580 Series (pcie 12), OpenCL 1.2, 8 GB VRAM, 36 CUs
Eth: Loading pools from epools.txt
Eth: the pool list contains 1 pool (0 from command-line)
Eth: primary pool: eu1.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.106)
Eth: New job #ccb4cd46 from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #278
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
GPU7: Starting up... (0)
GPU8: Starting up... (0)
GPU9: Starting up... (0)
Listening for CDM remote manager at port 4028 in full mode
GPU1: 26C 29%, GPU2: 26C 29%, GPU3: 26C 29%, GPU4: 27C 29%, GPU5: 26C 29%, GPU6: 25C 29%, GPU7: 26C 29%, GPU8: 25C 29%, GPU9: 27C 29%
Eth: New job #b08192ad from eu1.ethermine.org:4444; diff: 4000MH
Light cache generated in 4.2 s (12.0 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0)
Eth: New job #3829758f from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #f0d3bcbd from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0)
Eth: New job #da4b0d26 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0)
Eth: New job #f492c2b9 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0)
Eth: New job #118d1a1c from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #4659b0c9 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #5a44dffe from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b9edd3ab from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0)
Eth: New job #6536180f from eu1.ethermine.org:4444; diff: 4000MH


====================================================================================================
Diagnostics done. Stopping miner process ...
Prepare stopping Mining Software
Stopping Mining Software
Diagnostics completed

Thanks for your question.
If you start the mining software with the Diagnostics button in the toolbar, do you get any specific error message? Does this problem happen if you change the clocking settings in any direction - even if you underclock?

And if i apply any modified clocks the miner refuse to start after applying them

Hi,

I've recently bought Premium edition and i have rigs with 9 x Rx 580 8Gb and i can't overclock them,they are on ubuntu 16.04 need help.

Thx in advance,

Iv

Awesome Miner version 6.8.4 (Development preview of 6.9)

 Awesome Miner Antminer S9 firmware
  - The firmware can be automatically downloaded by selecting it from the list in the Update firmware dialog
 GPU mining
  - Bulk edit improved to include configuration of Managed Miner property for Administrator Privileges
 Features
  - A new Information column can be added to the list of miners where a number of predefined properties can be included and displayed. Including details from the Awesome Miner Antminer firmware, uptime, pool worker name and more.
 User interface
  - The coin selection control has been improved and will also allow sorting on either coin name or algorithm name
 Mining software
  - T-Rex miner 0.13.2
  - CryptoDredge 0.21.0
  - Gminer 1.55
  - XmRig CPU 2.99.5-beta5
  - Lolminer 0.8.6
 Corrections
  - Correction to colors for chip status when using the Awesome Miner Antminer firmware
  - Correction for profit switcher for External Miners when using both the new and old Nicehash platform

Hardware Version   13.10.1.3
Kernel Version   Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
File System Version   Tue May 7 20:33:06 CST 2019

Yup, that's what I was looking for.

Interesting that it does not appear to be in their "official" api v2 documentation...

Thanks again,
...jim

Try Options -> Statistic Providers -> Override coin algorithms: (Configure) -> Add

Coin Short Name: ZEL
Map to algorithm: Equihash 125,4

if you want quick fix straight away.

***
it really is probably duplicate entries from before and after fork that got things mixed up, if you look at Options -> Coins

Both in Visible and Hidden column, it's likely you have more than 1 ZEL added all up from those 2 columns if you have "Keep coins even when no longer listed by provider" checked in the Options -> Statistic Providers page

Personally I have 3 since ZEL forked to 144 then 125 from original Equihash whichever parameter that was I don't remember.

Thanks. I have some mining rigs and ZelCash is listed under Equihash 144.5 in all them. I double checked those two sections that you mentioned, and both of them are empty. Please release a new update and get it fixed. Cheers

Thanks and continue your great work!!

Hi Jim,

I'm not sure if it's this one you are looking for, but maybe you could give it a try?
https://api2.nicehash.com/main/api/v2/mining/external/(PutTheBtcAddressHere)/rigs/

I've made an update for this. Please update the mining software definition to get the latest updates.

The Chip Temperature should be higher than the PCB temperature and when looking at my S15 that's the case. I will have to investigate this a bit more.

Can you please let me know which firmware version you are running? Thanks!

Would anyone know what is the API call to get an external wallet balance for the new Nicehash platform?

I've gone through their documentation and can't seem to find it. I'd like to use it in a script.

Much thanks,
...jim